Yamaha YX500FT Bedienungsanleitung
Yamaha
musikinstrument
YX500FT
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yamaha YX500FT (8 Seiten) in der Kategorie musikinstrument. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
マルチパーカッションラック
MULTI-FRAME PARTS
MULTIPLER BEFESTIGUNGSRAHMEN
CHÂSSIS MULTI SUPPORT
SOPORTE BASTIDOR MULTIPERCUSIÓN
组合支架 ( 配件 )
멀티 프레임 부품
日本語
English
Deutsch
Français
中文
Español
한국어
RD500
シロフォン
XYLOPHONE
XYLOPHON
XYLOPHONE
XILÓFONO
木琴
실로폰
YX500FT
『安全へのこころがけ』および『ガススプリング取り扱いに関する注意事項』を必ずお読みください。
Carefully read the contents of this manual, especially all precautions.
Lesen Sie unbedingt die „Vorsichtshinweise für die Handhabung der Gasfeder“ und die „Vorsichtsmaßregeln“.
Lire attentivement les paragraphes « Précautions de manipulation du ressort à gaz » et « Précautions à observer ».
Lea sin falta las “Precauciones para la manipulación del muelle de gas” y las “Precauciones”.
务请阅读“气弹簧支架操作注意事项”和“注意事项”。
“가스 스프링 취급상의 주의사항” 및 “주의사항” 을 반드시 읽어 주십시오 .
取扱説明書 / Owner’s Manual / Bedienungsanleitung /
Mode d’emploi / Manual de instrucciones / 使用手册 / 사용설명서
8
Precautions
Before using please thoroughly read the following precautions, instructions and explanations
on handling and using the instrument safely.
When assembling or disassembling the rack or xylophone, please observe the following precautions.
Especially in the case of children, a responsible adult should provide instruction
on the proper use and treatment of the instrument.
Preventing Injuries—Obey all precautions described below
About
the
Icons
Icons are used in this section to promote the safe
and proper use of this product and to prevent
harm and property damage to you and others.
Please fully understand the meaning of the icons
before reading the manual.
This icon indicates actions that are prohibited.
This icon urges you to pay caution (includes dangers and
warnings).
This icon indicates instructions that should be strictly
followed
Warning Disregard of the warnings with this mark or misuse may
result in death or serious injury.
Instrument Placement
Do not place the instrument on an unstable surface
such as a slope or uneven surface.
The instrument may fall or overturn resulting in injury.
Instrument Handling
Do not lean on or climb on the instrument.
The instrument may fall causing serious injury.
Do not play around the instrument.
It may cause the instrument to fall over. Bumping into
the instrument may result in injury.
Keep away from the instrument during earthquakes.
Strong tremors can cause the instrument to move about
or overturn.
Do not mount any instruments other than those rec-
ommended for mounting on the RD500.
The RD500 rack is specially designed for use with the
YX335 and YX500FT. Do not modify any instrument
for installing on the rack. Doing so can result in the
instrument dropping off resulting in serious injury. The
YX500R and YX500F cannot be mounted on the rack.
Do not attach optional instruments to the rack with
poor balance.
Because the rack can overturn or the optional instru-
ments can drop off, this is extremely dangerous. Always
make sure that the instruments are attached to the rack
using the specially designed clamps, and that they are
positioned to provide good balance on the rack. Attach-
ing instruments in a poorly balanced manner outside of
the rack frame or rack pipe can cause the instrument to
overturn.
Always assemble/disassemble the instrument on a
fl at surface.
When assembling or disassembling the rack and at-
taching or removing the optional instruments, always
work on a flat, solid surface. Working on an unstable
surface such as a shaky table or sloped surface can
cause the instrument to overturn.
Make sure that all nuts and bolts are fi rmly
tightened
before using the instrument.
Firmly tighten all nuts and bolts on each part after their
positions have been determined. Using the instrument
with loose nuts or bolts can cause the rack to overturn
or instruments to drop off. Make sue that all nuts and
bolts are fi rmly retightened before using the instrument.
Always remove the optional instrument before ad-
justing its height or angle.
When adjusting the height or angle of heavy optional
instruments such as marching bells, chimes, etc., re-
move the instruments first and then adjust. Adjusting
the instruments while attached to the rack can result in
pinched hands or fi ngers causing injury.
Instrument Movement
Do not run while pushing the instrument.
The instrument may become impossible to stop, crash
into a wall, and cause serious injury.
Never carry the assembled instrument up or down
the stairs.
Parts may fall off, or you may loose balance resulting
in serious injury. Only move the instrument after it has
been disassembled.
Never try lifting the instrument by yourself when
moving the instrument.
Lifting the instrument by yourself can result in pinched
limbs, back injury, or other serious injury. The instrument
should always be moved using at least two persons
holding the rack by the leg center rail (see page 11) with
both hands.
* The YX500FT weighs approximately 27kg. When at-
tached to the RD500, their combined weight is 60kg.
When moving the instrument on its casters, hold the
upper leg section and push forward slowly across
smooth, fl at surfaces.
Moving the instrument on sloped, uneven, or graveled
surfaces can result in the instrument overturning or run-
ning away out of control.
[Good balance] [Poor balance]
9
Caution
Disregard of cautions with this mark or misuse may result
in personal injury or the loss of personal property.
Precautions Regarding the Gas Spring
Please observe the following instructions for proper handling of the gas spring.
* Refer to page 13 for gas spring removal.
Caution Disregard of cautions with this mark or misuse may
result in personal injury or the loss of personal property.
Be careful not to pinch your fi ngers or hands when
assembling.
Doing so may cause injury due to pinched fi ngers, etc.
When assembling legs, reinforcement stays, and reso-
nator pipes, use two persons taking special care to
double-check each other as the assembly proceeds.
Always make sure that the wing bolts and wing nuts
are fi rmly tightened to prevent parts from becoming
loose during performance.
Using the instrument with loose bolts and nuts can
cause trouble during performance such as unexpected
movement, etc., or parts falling off during transport re-
sulting in injury.
Refer to the instructions when assembling the rack.
Height adjustment should always be performed with
at least two persons.
Make sure that all procedures described in the manual
are followed when assembling the rack and attaching
or removing the xylophone. Disobeying the procedures
can result in parts falling off from the rack during as-
sembly, which can be dangerous. Also, height adjust-
ment should always be performed by at least two
persons. If it is absolutely necessary to adjust height by
one person, do not make adjustments of more than two
notches on the slide guides at a time (see page 13).
Handling
Only use genuine Yamaha clamps.
Never use clamps that do not properly fi t on the rack pipe,
etc. when making attachments. Doing so can cause the rack
to overturn or instruments to fall off resulting in serious injury.
Never loosen the slide guide fi xing bolt when the xy-
lophone is not mounted on the rack.
Never loosen the slide guide fi xing bolts when the xylophone
is not mounted on the rack or when the legs are not attached
to the rack (except for when removing the gas spring). Doing
so is extremely dangerous because the rack frame (see page
11) can rise suddenly causing an accident or injury.
Limits to attaching optional instruments
The total weight of optional instruments must not ex-
ceed 18kg. Attaching more weight can result in the
entire rack overturning, becoming damaged, or the
optional instruments falling off or becoming damaged.
This is extremely dangerous.
Do not touch cracked tone bars.
Cracked tone bars have sharp edges that can cut hands.
Please change cracked tone bars as soon as possible.
Do not use the mallets for any other purpose than
playing the instrument.
Misuse of the mallets may result in unexpected injury or
accidents.
● In the event of a failure, stop using the instrument and contact the
shop where you purchased it. If your dealer is unable to assist you,
please contact Yamaha directly as per enclosure.
Cautions when discarding the gas spring
Pressurized nitrogen gas is sealed inside
of the gas spring. Be sure to release the
gas before discarding the gas spring, or
an explosion can occur, causing injury.
[Cautions]
• Do not push.
• Do not cut the gas spring.
• Do not throw the gas spring into a fi re.
• Do not make a hole anywhere in the gas
spring other than in the specifi ed posi-
tions (q and w in the fi gure below).
[Discarding procedure]
1. Put the gas spring in a plastic bag. Using
a drill of 2 to 3 mm, make a hole q from
outside of the plastic bag at the position as
specifi ed in the fi gure to release the gas and
oil and then make a hole w at the position
as specifi ed. (Be sure to make holes in the
order of
q and w.)
2. If a vinyl bag is not used, the oil and drill
chips will spread. (In such a case, wear eye
protection glasses. )
qw35mm
Drill
Plastic
bag
15mm
* Drill two holes, as shown above, to release
the gas before discarding the gas spring.
Danger!
Disregarding any caution with this
mark can place you in imminent danger
resulting in death or serious injury.
Handling
Never lubricate the moving parts on the gas spring.
Lubricating the gas spring will reduce the durability of the seal and
cause oil leakage.
Do not expose to impacts.
Doing so will cause oil leakage, malfunction, or damage.
Never dismantle.
High-pressure gas is sealed inside of the gas spring, so any at-
tempt to disassemble it is extremely dangerous.
Do not bend.
The rod is susceptible to bending from directional loads. A poorly bal-
anced load placed on the rod can result in bending and malfunction.
Do not hit.
Hitting the piston rod or cylinder can shorten the life of the seal or
result in malfunction.
Do not expose the instrument to excessively high or low temperatures.
Doing so can cause malfunction. Use the instrument only in tem-
peratures ranging from -20ºC to 50ºC.
Do not expose the instrument to rain, moisture or dust.
Doing so can cause malfunction.
Do not use excessive force to lift the side frame, which can
pull the gas spring out of the leg.
Doing so can cause malfunction or damage the instrument.
Do not apply a high tensile load on the gas spring.
Doing so can cause malfunction or damage the instrument.
Produktspezifikationen
| Marke: | Yamaha |
| Kategorie: | musikinstrument |
| Modell: | YX500FT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Yamaha YX500FT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung musikinstrument Yamaha
10 September 2024
10 September 2024
9 September 2024
6 September 2024
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung musikinstrument
- musikinstrument Roland
- musikinstrument Jupiter
- musikinstrument Pyle
- musikinstrument Max
- musikinstrument Casio
- musikinstrument Eurolite
- musikinstrument Alesis
- musikinstrument Boss
- musikinstrument Chord
- musikinstrument La Crosse Technology
- musikinstrument IK Multimedia
- musikinstrument Elektron
- musikinstrument Mooer
- musikinstrument Palmer
- musikinstrument Otamatone
- musikinstrument Gravity
- musikinstrument Efnote
- musikinstrument J.Michael
- musikinstrument DW Drums
- musikinstrument Woodley
- musikinstrument Artesia
Neueste Bedienungsanleitung für -Kategorien-
24 September 2024
24 September 2024
24 September 2024
19 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024