Yamaha NS-P220 Bedienungsanleitung
Yamaha
Lautsprechersystem
NS-P220
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yamaha NS-P220 (102 Seiten) in der Kategorie Lautsprechersystem. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/102
NS-P220
HOME CINEMA 5.1CH SPEAKER PACKAGE
5.1 SYSTEM D’ENCEINTES HOME CINEMA
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
G
●Audio connection cord
●Câble de connexion audio
●Audio-Anschlußkabel
●Audio anslutningssladd
●Cavo di collegamento audio
●Cable de conexión de audio
●Audio aansluitkabel
●Speaker cords
●Câbles d’enceintes
●Lautsprecheranschlußkabel
●Högtalarledningar
●Cavi per gli altoparlanti
●Cables de los altavoces
●Luidsprekerdraden
●Mounting brackets
●Supports de montage
●Befestigungshalterungen
●Monteringsfästen
●Staffe di montaggio
●Ménsulas de instalación
●Montagesteunen
●Screws
●Vis
●Schrauben
●Skruvar
●Viti
●Tornillos
●Schroeven
●Main and rear speakers
●Enceintes principales et arrière
●Haupt- und hinteres Lautsprecherpaar
●Huvudhögtalare och bakre högtalare
●Altoparlanti principali e posteriori
●Altavoces principales y traseros
●Hoofdluidsprekers en achterluidsprekers
●Center speaker
●Enceinte centrale
●Centerlautsprecher
●Mitthögtalare
●Altoparlante centrale
●Altavoz central
●Middenluidspreker
●Subwoofer
●Subwoofer
●Subwoofer
●Subwooferhögtalaren
●Subwoofer
●Altavoz ultragraves
●Subwoofer
UNPACKING After unpacking, check that the following items are contained.
DEBALLAGE Après le déballage, vérifier que les pièces suivantes sont incluses.
AUSPACKEN Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
UPPACKNING Kontrollera efter det apparaten packats upp att följande delar finns med.
DISIMBALLAGGIO Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
DESEMBALAJE Desembale el aparato y verifique que los siguientes accesorios están en la caja.
UITPAKKEN Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
(A)
(B)
[4m] [15m]
(A)
(B) (C)
X 3
X 2 X 5
X 8
X 2
X 3 X 2
<NX-220P><NX-220P><NX-220P><NX-220P>
<NX-C220>
<SW-P201>
English
E-1
●
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
●
Install the speakers in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the speakers to rain or water.
●To prevent the enclosure from warping or discoloring, do
not place the speakers where they will be exposed to
direct sunlight or excessive humidity.
●Do not place the following objects on the speakers:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to the speakers, and/or you may get an
electric shock.
●Do not place the speakers where foreign objects such as
water drips might fall. It might cause a fire, damage to
the speakers, and/or personal injury.
● Do not place the speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.
●Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
●Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into “clipping”. Otherwise the
speakers may be damaged.
●
When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should
be taken never to exceed the speakers’ maximum input.
●As these speakers contain strong magnets (though all of
them are magnetically shielded types), avoid placing
watches, magnetic tapes, etc. near them. Also, placing
the speakers near a TV set may impair picture color. If
this happens, move the speakers away from the TV set.
●
Do not attempt to clean the speakers with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
●Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.
For SW-P201 only
●Never open the cabinet. If something drops into the set,
contact your dealer.
●Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the power
plug and the wires connected to other equipments.
Never pull the wires themselves.
●Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding
that the unit is faulty.
CAUTION: Read this before operating your unit.
Thank you for selecting this YAMAHA NS-P220 Speaker Package.
●When not planning to use this unit for a long period (ie.,
vacation, etc.), disconnect the AC power plug from the
wall outlet.
●
To prevent lightning damage, disconnect the AC power
plug when there is an electric storm.
●Since this unit has a built-in power amplifier, heat will
radiate from the rear panel. Place the unit apart from the
walls, allowing enough space above, behind and on the
both sides of the unit to prevent fire or damage.
Furthermore, do not position with the rear panel facing
down on the floor or other surfaces.
<For U.K. and Europe models only>
Be sure to allow a space of at least 20 cm above, behind
and on both sides of the unit.
●Super-bass frequencies reproduced by this unit may
cause a turntable to generate a howling sound. In such a
case, move this unit away from the turntable.
●If you hear distorted noise (i.e., unnatural, intermittent
“rapping” or “hammering” sounds) coming from this unit,
reduce the volume level. Extremely loud playing of a
movie soundtrack’s low frequency, bass-heavy sounds or
similarly loud popular music passages can damage this
speaker system.
●VOLTAGE SELECTOR
(General model only)
The VOLTAGE SELECTOR on the
rear panel of this unit must be set
for your local main voltage
BEFORE plugging into the AC
main supply.
Voltages are 110-120/220-240 V
AC, 50/60 Hz.
Standby mode
If the POWER switch is set to the ON position and the
AUTO STANDBY switch is set to the HIGH or LOW
position, this unit turns into the standby mode when no
signal is inputted to this unit.
In this state, this unit is designed to consume a very
small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
VOLTAGE
SELECTOR
220V-240V
110V-120V
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
E-2
CONTENTS
UNPACKING.................... Inside of Front Cover
CAUTION .........................................................1
COMPONENTS OF THE PACKAGE .............. 2
SETTING UP THE SPEAKERS ...................... 3
Placing the subwoofer ................................... 3
Mounting the main and center speakers .......... 4
Mounting the rear speakers............................ 5
CONNECTIONS.............................................. 6
An example of basic connections .................... 6
How to connect speaker cords to the input
and output terminals of the speakers............... 8
Connecting the subwoofer to speaker output
terminals of the amplifier................................ 9
USING THE SUBWOOFER (SW-P201)........ 10
Controls and their functions.......................... 10
Adjusting the subwoofer before use ................ 11
ADVANCED YAMAHA ACTIVE SERVO
TECHNOLOGY (for SW-P201) .................... 12
TROUBLESHOOTING.................................. 13
SPECIFICATIONS ........................................ 14
COMPONENTS OF THE PACKAGE
<Main/rear speakers (NX-220P)>
2-way acoustic-suspension speaker system
<Center speaker (NX-C220)>
2-way acoustic-suspension speaker system
<Subwoofer (SW-P201)>
Active Servo Processing Subwoofer System with a
built-in power amplifier
●This subwoofer system employs Advanced YAMAHA
Active Servo Technology which YAMAHA has developed
for reproducing higher quality super-bass sound. (Refer to
page 12 for details on Advanced YAMAHA Active Servo
Technology.) This super-bass sound adds a more
realistic, theater-in-the-home effect to your stereo system.
●This subwoofer can be easily added to your existing
audio system by connecting to either the speaker
terminals or the line output (pin jack) terminals of the
amplifier.
●The AUTO STANDBY switch saves you the trouble of
setting the POWER switch to the ON or OFF position.
The speaker package “NS-P220” is designed for use in a
multi-channel audio system such as a home theater system.
The package includes two pairs of main/rear speakers (NX-
220P), a center speaker (NX-C220) and a subwoofer
system (SW-P201).
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
English
E-3
m Placing the subwoofer
It is recommended to place the subwoofer on the outside of
either the right or the left main speaker. (See fig. Å .) The
placement shown in fig. ı is also possible, however, if the
subwoofer system is placed directly facing the wall, the
bass effect may die because the sound from it and the
sound reflected by the wall may cancel out each other. To
prevent this from happening, face the subwoofer system at
an angle as shown in fig. Å.
Note
There may be a case that you cannot obtain enough super-
bass sounds from the subwoofer when listening in the
center of the room. This is because “standing waves” have
been developed between two parallel walls and they cancel
the bass sounds.
In such a case, face the subwoofer obliquely to the wall. It
also may be necessary to break up the parallel surfaces by
placing bookshelves etc. along the walls.
( : Subwoofer, : Main speaker)
ı
Å
SETTING UP THE SPEAKERS
Before making connections, place all speakers in their respective positions. The positioning of the speakers is important
because it controls the whole sound quality of this system.
Place the speakers depending on your listening position by following the instructions below.
Speaker configuration
This speaker package employs a 6 speaker configuration: 2
main speakers, 2 rear speakers, a center speaker and a
subwoofer.
The main speakers are used for main source sound. The
rear speakers are used for surround sounds, and the center
speaker is for center sounds (dialog etc.). The subwoofer is
for reinforcing low frequencies on your audio system.
Note
In this speaker package, the same speakers (NX-220P) are
used for the main and rear speakers.
Placing speakers
Main speakers: On both sides of and at approximately
the same height as the TV set.
Rear speakers: Behind your listening position, facing
slightly inward. About 1.8 m (approx. 6
feet) from the floor.
Center speaker: Precisely between the main speakers.
Subwoofer: The position of the subwoofer is not so
critical because low bass tones are not
highly directional.
Refer to “Placing the subwoofer” below
for a recommended positioning of the
subwoofer.
Main L Center Main R
Rear L
Subwoofer
Rear R
Main L
Main R Subwoofer
Center
Rear L
Rear R
TV-set
E-4
Place the main speakers on a rack or on a shelf. Place the
center speaker on top of the TV, on a shelf or inside the TV
rack so that it is stable.
To obtain more stability and usefulness, we recommend that
you mount these speakers on the provided mounting
brackets (type A).
To mount the speakers on the mounting
brackets (type A)
1Attach the bracket to the bottom of the speaker by using
the provided screw (type A).
2Turn and/or slide the speaker on the bracket according
to your preference, and then tighten the screw.
Note
Though this speaker is a magnetically shielded type,
there may be some influence on a TV picture depending
on the type of TV or the placement of the speaker. In
such a case, place the speaker apart from TV so that
there is no influence on TV picture.
mMounting the main and center speakers
1
2
The provided mounting bracket (type C) with 1 pair of
screw holes (at an interval of 60 mm) can be used to
mount the speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
1Attach the bracket to the bottom of the speaker by
using the provided screw (type A) so that the convex
part of the bracket fits in the grooved part on the
bottom of the speaker as shown on the left.
2Mount the speaker on the speaker stand by using the
screw holes on the bracket.
Note
The mounting bracket (type C) is provided for each of 5
speakers.
If you want to mount a speaker on a commercially available speaker stand
(for the main/center/rear speakers)
Mounting
bracket
(type A)
Screw
(type A)
Mounting
bracket
(type C)
Screw
(type A)
60 mm
English
E-5
Mount the rear speakers on a shelf, rack or directly on the
floor, or hang them on the wall.
To mount the rear speakers on a wall by
using the provided mounting brackets
(type B)
Note
It is recommended that you connect the speaker cords to
the speaker’s terminals before attaching the bracket to the
speaker.
1Attach the bracket to the bottom of the speaker by using
the provided screw (type B).
2Turn and/or slide the speaker on the bracket according
to your preference, and then, tighten the screw.
3Fasten screws into a firm wall or wall support as shown
in the figure, and hang the holes of the mounting
bracket on the protruding screws.
* Make sure that the screws are securely caught by the
narrow parts of the holes.
Note
If desired, you can hang the speaker directly on the
protruding screws on the wall without using the bracket.
WARNING
●Each speaker weighs 0.7 kg (1 lbs. 9 oz.). Do not
mount them on thin plywood or a wall with soft
surface material. If mounted, the screws may come
out of the flimsy surface and the speakers may fall.
This damages the speakers or causes personal
injury.
●Do not install the speakers to a wall with nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause them to fall.
●To avoid accidents resulting from tripping over loose
speaker cords, fix them to the wall.
●Select a proper position on the wall to mount the
speaker and the bracket so that no one will injure his/
her head or face with the edge of the bracket.
mMounting the rear speakers
1
2
3
Mounting
bracket
(type B)
Screw
(type B)
Mounting
bracket
(type B)
Wall/ wall
support
Tapping screw
(Available at the
hardware store)
Min.
20 mm
65 mm
E-6
CONNECTIONS
Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
mAn example of basic connections
SPEAKERS
MAIN CENTER REAR
(SURROUND)
OUTPUT
SUB
WOOFER
CAUTION
SEE INSTRUCTION
MANUAL FOR CORRECT SETTING.
MAIN
A
B
A
B
CENTER REAR
(SURROUND)
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
INPUT2 /MONO
REAR R
REAR L
REAR R
CENTER
REAR L
CENTER
FRONT R
FRONT R
FRONT L
FRONT L
LeftRight
Subwoofer
Amplifier
To AC outlet
Center speaker Rear speakers
LeftRight Main speakers
E-8
Main/center/rear speakers
One side of the provided speaker cord has a white broken
line and the other side has no line.
Connect the (+) terminals on both the speaker and the
amplifier using the side with a white broken line. Connect
the (–) terminals on both components using the side with no
line.
Red: positive (+)
Black: negative (–)
Subwoofer (INPUT1/OUTPUT terminals)
Connect the (+) terminals on both the subwoofer and the
amplifier using one side of the cord. Connect the (–)
terminals on both components using the other side of the
cord.
Red: positive (+)
Black: negative (–)
mHow to connect speaker cords to the input and output terminals
of the speakers
For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the
connections are faulty, no sound will be heard from the speakers.
10 mm
How to Connect:
1Press and hold the terminal’s tab, as shown in the
figure.
2Insert the bare wire end properly into the terminal hole.
[Remove approx. 10 mm (3/8”) insulation from the
speaker cord.]
3Release your finger from the tab to allow it to lock
securely on the cord’s wire end.
4Test the firmness of the connection by pulling lightly on
the cord at the terminal.
Note
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or both
of them.
White broken line
English
E-9
m Connecting the subwoofer to speaker output terminals of the
amplifier
If your amplifier has only one set of main speaker output terminals
Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT
terminals of the subwoofer to the main speakers.
Left main
speaker Right main
speaker Subwoofer
Amplifier
Speaker
output
terminals
To AC outlet
If your amplifier has two sets of speaker output terminals
(Both A and B speaker outputs
must be ON.)
Subwoofer
Amplifier
Speaker output terminals
To AC outlet
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
AB
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
Left main
speaker Right main
speaker
E-14
SPECIFICATIONS
NX-220P, NX-C220
Type ............... 2-way acoustic-suspension speaker system
Magnetically shielded type
Driver............................................. 8 cm (3-1/8”) cone type
1.9 cm (3/4”) balanced dome type
Nominal Input Power ................................................. 30W
Maximum Input Power ............................................. 100W
Impedance .....................................................................6Ω
Frequency Response................................140 Hz–27 kHz
Sensitivity ...................................................86 dB/2.83V/m
Dimensions (W x H x D)
<NX-220P>........................100 mm x 140 mm x 113 mm
(3-15/16” x 5-1/2” x 4-7/16”)
<NX-C220>.......................140 mm x 100 mm x 112 mm
(5-1/2” x 3-15/16”x 4-7/16”)
Weight
<NX-220P>.................................. 0.7 kg (1 lbs. 9 oz.) x 4
<NX-C220>....................................... 0.7 kg (1 lbs. 9 oz.)
SW-P201
Type ............... Advanced Yamaha Active Servo Technology
Driver...................... 16 cm (6-5/16”) cone woofer (JA1678)
Magnetically shielded type
Amplifier Output.................................................... 50W/5Ω
Frequency Response................... 30 Hz–200 Hz (–10 dB)
Power Supply
USA and Canada models ....................... AC 120V, 60 Hz
U.K. and Europe models ........................ AC 230V, 50 Hz
Australia model.......................................AC 240V, 50 Hz
General model.............. AC 110-120/220-240V, 50/60 Hz
Power Consumption ...................................................42W
(In the standby mode: 6W)
Dimensions (W x H x D)...... 200 mm x 395 mm x 384 mm
(7-7/8” x 15-9/16” x 15-1/8”)
Weight .................................................9.3 kg (20 lbs. 7 oz.)
Accessories ...............................Audio connection cord x 1
Speaker cord [4 m (13.1 feet)] x 3
Speaker cord [15 m (49.2 feet)] x 2
Mounting bracket (type A) x 3
Mounting bracket (type B) x 2
Mounting bracket (type C) x 5
Screw (type A) x 8
Screw (type B) x 2
* Please note that all specifications are subject to change
without notice.
F-2
TABLE DES MATIERES
DEBALLAGE ........ Intérieur du couvercle avant
PRECAUTIONS D’USAGE ..............................1
ELEMENTS DE L’ENSEMBLE ....................... 2
DISPOSITION DES ENCEINTES ................... 3
Positionnement du subwoofer ........................ 3
Montage des enceintes principales
et centrale.......................................................... 4
Montage des enceintes arrière ....................... 5
CONNEXIONS ................................................ 6
Exemple de raccordement de base ................. 6
Raccordement des cordons d’enceintes aux
bornes d’entrée et de sortie des enceintes....... 8
Raccordement du subwoofer aux bornes de
sortie d’enceintes de l’amplificateur ................ 9
UTILISATION DU SUBWOOFER
(SW-P201) .................................................... 10
Les commandes et leurs fonctions ................ 10
Réglage du subwoofer avant l’utilisation ........ 11
ADVANCED YAMAHA ACTIVE SERVO
TECHNOLOGY (pour SW-P201) ................. 12
EN CAS DE DIFFICULTE ..............................13
CARACTERISTIQUES TECHNIQUES ......... 14
ELEMENTS DE L’ENSEMBLE
Mode veille
Si l’interrupteur POWER est mis sur la position ON et le
commutateur AUTO STANDBY sur la position HIGH ou
LOW, cet appareil passe en mode veille lorsqu’aucun
signal ne parvient à cet appareil.
Dans cet état, l’appareil consomme une très faible
quantité de courant.
AVERTISSEMENT
AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU
D’ÉLECTROCUTION, NE PAS EXPOSER L’APPAREIL
À LA PLUIE NI À L’HUMIDITÉ
L’ensemble d’enceintes “NS-P220” est conçu pour être
utilisé avec un système audio multi-canaux, tel qu’une
installation Home Cinéma. L’ensemble comprend deux
paires d’enceintes principales/arrière (NX-220P), une
enceinte centrale (NX-C220), et un subwoofer (SW-P201).
<Enceintes principales/arrière (NX-220P)>
Enceinte à suspension acoustique à deux voies
<Enceinte centrale (NX-C220)>
Enceinte à suspension acoustique à deux voies
<Subwoofer (SW-P201)>
Subwoofer à Active Servo Processing avec
amplificateur incorporé
●Ce subwoofer utilise Advanced YAMAHA Active Servo
Technology mise au point par YAMAHA pour la
reproduction de basses fréquences de meilleure qualité.
(Pour ce qui concerne Advanced YAMAHA Active Servo
Technology, se reporter à la page 12.) Ces basses
fréquences ajoutent un effet réaliste cinématographique
aux sons fournis par une chaîne stéréo.
●Ce subwoofer peut être facilement ajouté à votre chaîne
actuelle en le raccordant soit aux bornes d’enceintes soit
aux bornes de sortie de ligne (fiche Cinch) de
l’amplificateur.
●Le commutateur AUTO STANDBY vous évite d’avoir à
régler l’interrupteur POWER sur la position ON ou OFF.
POUR LES CONSOMMATEURS CANADIENS
Pour eviter les chocs electriques, introduire la lame la
plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Produktspezifikationen
| Marke: | Yamaha |
| Kategorie: | Lautsprechersystem |
| Modell: | NS-P220 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Yamaha NS-P220 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprechersystem Yamaha
6 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
4 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
Bedienungsanleitung Lautsprechersystem
- Lautsprechersystem Samsung
- Lautsprechersystem Sony
- Lautsprechersystem Panasonic
- Lautsprechersystem AEG
- Lautsprechersystem Grundig
- Lautsprechersystem Auna
- Lautsprechersystem Pioneer
- Lautsprechersystem JBL
- Lautsprechersystem Onkyo
- Lautsprechersystem Technics
- Lautsprechersystem Toshiba
- Lautsprechersystem Jamo
- Lautsprechersystem ION
- Lautsprechersystem American Audio
- Lautsprechersystem Paradigm
- Lautsprechersystem BW
Neueste Bedienungsanleitung für -Kategorien-
25 August 2024
25 August 2024
25 August 2024
24 August 2024
23 August 2024
23 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024