Yale PIR Image Camera Bedienungsanleitung

Yale Sicherheit PIR Image Camera

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yale PIR Image Camera (2 Seiten) in der Kategorie Sicherheit. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Description:
1) Learn/Test Button with LED
Send test signal: hold and release within 3 secs.
This is used when checking accessory range
(See Smart Home Alarm user manual).
Send learn signal: hold for 10 secs+. Learn
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 2 x 1.5V AA Alkaline batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Image Camera with batteries
• 4 x wall plugs & screws
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Image will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Image Camera
(SR-PC)
smart
Living
3
2
1
4
5
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Specification
Operation
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specification and
product design at any time without notice.

Produktspezifikationen

Marke: Yale
Kategorie: Sicherheit
Modell: PIR Image Camera

Brauchst du Hilfe?

Wenn Sie Hilfe mit Yale PIR Image Camera benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheit Yale

Yale

Yale SR Series - Smarthome Alarm Bedienungsanleitung

25 August 2024
Yale

Yale PIR Image Camera Bedienungsanleitung

25 August 2024
Yale

Yale SR330 Bedienungsanleitung

25 August 2024

Bedienungsanleitung Sicherheit

Neueste Bedienungsanleitung für -Kategorien-

NetworX

NetworX NX-595E IP Communication Module Bedienungsanleitung

5 Oktober 2024
Unitron

Unitron Smart Alert Systeem Bedienungsanleitung

24 September 2024
NetworX

NetworX NX-408 Bedienungsanleitung

20 September 2024
Theben

Theben Luxa 102.150 - 1020961-2 Bedienungsanleitung

19 September 2024
Elro

Elro AB600P - MOTION DETECTOR Bedienungsanleitung

17 September 2024
Elro

Elro AG40KE Bedienungsanleitung

17 September 2024
Elro

Elro CS95DVR Bedienungsanleitung

16 September 2024
BTicino

BTicino Classe100 X16E Beveiliging Bedienungsanleitung

16 September 2024
One2track

One2track Safety Angel Bedienungsanleitung

27 August 2024
Sygonix

Sygonix SY-3851632 Bedienungsanleitung

27 August 2024