Worx WX254.1 Bedienungsanleitung

Worx Schraubenmaschine WX254.1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Worx WX254.1 (16 Seiten) in der Kategorie Schraubenmaschine. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUcTIONS
2
GENERAL POwER TOOL SAFETY wARNINGS
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term power tool in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with grounded
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f ) If operating a power tool in a damp
location is unavoidable, use a Ground
Fault Circuit Interupter (GFCI) protected
supply. Use of a GFCI reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
3
of drugs, alcohol or medication. A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f ) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition

Produktspezifikationen

Marke: Worx
Kategorie: Schraubenmaschine
Modell: WX254.1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Worx WX254.1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schraubenmaschine Worx

Worx

Worx WX279.9 Bedienungsanleitung

3 September 2024
Worx

Worx WX254.1 Bedienungsanleitung

3 August 2024
Worx

Worx WX254 Bedienungsanleitung

2 August 2024
Worx

Worx WX272L.9 Bedienungsanleitung

1 August 2024
Worx

Worx WX253.1 Bedienungsanleitung

25 Juli 2024
Worx

Worx WX240L Bedienungsanleitung

9 Juli 2024

Bedienungsanleitung Schraubenmaschine

Neueste Bedienungsanleitung für -Kategorien-

Bosch

Bosch GSB 18V-65 Professional Bedienungsanleitung

5 Oktober 2024
Makita

Makita 6906J Bedienungsanleitung

5 Oktober 2024
Bosch

Bosch GDX 18V-285 Professional Bedienungsanleitung

4 Oktober 2024
Makita

Makita DTW300Z Bedienungsanleitung

4 Oktober 2024
Makita

Makita 6952 Bedienungsanleitung

2 Oktober 2024
Hazet

Hazet 9013 LGTT Bedienungsanleitung

1 Oktober 2024
Milwaukee

Milwaukee 2455-20 Bedienungsanleitung

27 September 2024
Cleco

Cleco 19TTA05Q Bedienungsanleitung

24 September 2024
Cleco

Cleco 30EFN30F1 Bedienungsanleitung

24 September 2024
Cleco

Cleco 30EAN28FA3 Bedienungsanleitung

24 September 2024