Makita DTW300Z Bedienungsanleitung
Makita
Schraubenmaschine
DTW300Z
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Makita DTW300Z (16 Seiten) in der Kategorie Schraubenmaschine. Dieser Bedienungsanleitung war fรผr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
DTW300
DTW301
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTW300 DTW301
Fastening capacities Standard bolt M10 - M20
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed (RPM) Max impact mode 0 - 3,200 min
-1
Hard impact mode 0 - 2,600 min
-1
Medium impact mode 0 - 1,800 min
-1
Soft impact mode 0 - 1,000 min
-1
Impacts per minute Max impact mode 0 - 4,000 min
-1
Hard impact mode 0 - 3,400 min
-1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,800 min
-1
Overall length 144 mm
Rated voltage D.C. 18 V
Net weight 1.5 - 1.8 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎di๏er๎from๎country๎to๎country.
โข๎ The๎weight๎may๎di๏er๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
โข๎ Some๎of๎the๎battery๎cartridges๎and๎chargers๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎Use๎of๎any๎other๎battery๎cartridges๎
and๎chargers๎may๎cause๎injury๎and/or๎๎ฟre.
Symbols
The๎followings๎show๎the๎symbols๎used๎for๎the๎equip-
ment.๎Be๎sure๎that๎you๎understand๎their๎meaning๎before๎
use.
Read instruction manual.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do not dispose of electric equipment or
battery๎pack๎together๎with๎household๎waste๎
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN62841-2-2:
Model DTW300
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
Model DTW301
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE: The declared noise emission value(s)
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can di๏er from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o๏ and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-2:
Model DTW300
Work mode: impact tightening of fasteners of the maxi-
mum๎capacity๎of๎the๎tool
Vibration emission (a
h) : 12.5 m/s2
Uncertainty๎(K)๎:๎1.5๎m/s
2
Model DTW301
Work mode: impact tightening of fasteners of the maxi-
mum๎capacity๎of๎the๎tool
Vibration emission (a
h) : 12.5 m/s2
Uncertainty๎(K)๎:๎1.5๎m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎another.
NOTE:๎The๎declared๎vibration๎total๎value(s)๎may๎also๎
be๎used๎in๎a๎preliminary๎assessment๎of๎exposure.
WARNING: The vibration emission during
actual use of the power tool can di๏er from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o๏ and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎to๎lose๎control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎ฟed๎plugs๎and๎matching๎outlets๎will๎
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic ๎ฟelds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Schraubenmaschine |
| Modell: | DTW300Z |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DTW300Z benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schraubenmaschine Makita
5 Oktober 2024
4 Oktober 2024
2 Oktober 2024
24 September 2024
24 September 2024
23 September 2024
22 September 2024
20 September 2024
17 September 2024
15 September 2024
Bedienungsanleitung Schraubenmaschine
- Schraubenmaschine Panasonic
- Schraubenmaschine Cotech
- Schraubenmaschine Bosch
- Schraubenmaschine Laserliner
- Schraubenmaschine Parkside
- Schraubenmaschine Vonroc
- Schraubenmaschine AEG
- Schraubenmaschine Powerfix
- Schraubenmaschine EMOS
- Schraubenmaschine Black And Decker
- Schraubenmaschine Cocraft
- Schraubenmaschine FERM
- Schraubenmaschine Ryobi
- Schraubenmaschine Senco
- Schraubenmaschine Skil
- Schraubenmaschine Hilti
- Schraubenmaschine DeWalt
- Schraubenmaschine Einhell
- Schraubenmaschine Elu
- Schraubenmaschine Festool
- Schraubenmaschine Mafell
- Schraubenmaschine Maktec
- Schraubenmaschine Worx
- Schraubenmaschine Tacklife
- Schraubenmaschine Hikoki
- Schraubenmaschine Hitachi
- Schraubenmaschine Hazet
- Schraubenmaschine Kress
- Schraubenmaschine Metabo
- Schraubenmaschine Stanley
- Schraubenmaschine Gรผde
- Schraubenmaschine Power Craft
- Schraubenmaschine Meec Tools
- Schraubenmaschine Dremel
- Schraubenmaschine Fieldmann
- Schraubenmaschine Dedra
- Schraubenmaschine Silverline
- Schraubenmaschine Facom
- Schraubenmaschine Greenworks
- Schraubenmaschine Yato
- Schraubenmaschine Genesis
- Schraubenmaschine Pansam
- Schraubenmaschine Toolland
- Schraubenmaschine Batavia
- Schraubenmaschine Matrix
- Schraubenmaschine Milwaukee
- Schraubenmaschine Toolcraft
- Schraubenmaschine Fein
- Schraubenmaschine Omega
- Schraubenmaschine Ingersoll Rand
- Schraubenmaschine Craftsman
- Schraubenmaschine Powerplus
- Schraubenmaschine Alpha Tools
- Schraubenmaschine EasyMaxx
- Schraubenmaschine Ozito
- Schraubenmaschine Kawasaki
- Schraubenmaschine Porter-Cable
- Schraubenmaschine Goon
- Schraubenmaschine Steren
- Schraubenmaschine Meister Craft
- Schraubenmaschine Truper
- Schraubenmaschine Einhell Bavaria
- Schraubenmaschine Wera
- Schraubenmaschine Weidmรผller
- Schraubenmaschine Rodcraft
- Schraubenmaschine Cleco
- Schraubenmaschine SW-Stahl
- Schraubenmaschine Gedore
- Schraubenmaschine TAURUS Titanium
Neueste Bedienungsanleitung fรผr -Kategorien-
5 Oktober 2024
4 Oktober 2024
1 Oktober 2024
27 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024