Woodland Scenics JP5742 Bedienungsanleitung
Woodland Scenics
Modelbouw
JP5742
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Woodland Scenics JP5742 (2 Seiten) in der Kategorie Modelbouw. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
JUST PLUG® LIGHTING SYSTEM
WOODLAND SCENICS® Manufactured by WOODLAND® • PO BOX 98, LINN CREEK, MO 65052 • N10 • woodlandscenics.com
Model making product. Not a toy! Not suitable for children under 14 years! / Produit
pour le modélisme. Pas un jouet! Pas adapté aux enfants de moins de 14 ans! / Producto
para modelismo. No es un juguete! No adecuado para niños menores de 14 años! /
Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
CAUTION: ATTENTION :Do not look directly into LED lights when in operation. / Ne pas
regarder directement dans les lumières LED en fonctionnement. / No mire PRECAUCIÓN:
directamente a las luces LED cuando está en funcionamiento. / VORSICHT: Schauen Sie nicht direkt
in die aufleuchtende LEDs.
LED STICK-ON LIGHTS
JP5736 (Orange)
INSTRUCTIONS
• Orange plastic band (1") identifies Orange light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande orange en plastique (2,54 cm) identifie la lumière orange.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color naranja (2,54 cm) en cable identifica luz naranja.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Oranges Kunststoffband (2,54 cm) kennzeichnet oranges LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die LED an
der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT gekennze-
ichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680)
oder Port Sharing Device (JP5681) einstecken.
JP5737 (Green)
INSTRUCTIONS
• Green plastic band (1") on cable identifies Green light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande verte en plastique (2,54 cm) identifie la lumière verte.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color verde (2,54 cm) en cable identifica luz verde.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Grünes Kunststoffband (2,54 cm) kennzeichnet grünes LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die LED an
der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT gekennze-
ichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680)
oder Port Sharing Device (JP5681) einstecken.
JP5738 (Blue)
INSTRUCTIONS
• Blue plastic-colored band (1") identifies Blue light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande bleue en plastique (2,54 cm) identifie la lumière bleue.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color azul (2,54 cm) en cable identifica luz azul.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Blaues Kunststoffband (2,54 cm) kennzeichnet blaues LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die LED an
der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT gekennze-
ichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680)
oder Port Sharing Device (JP5681) einstecken.
JP5739 (Red)
INSTRUCTIONS
• Red plastic band (1") identifies Red light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande rouge en plastique (2,54 cm) identifie la lumière rouge.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color rojo (2,54 cm) en cable identifica luz rojo.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Rotes Kunststoffband (2,54 cm) kennzeichnet rotes LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die LED an
der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT gekennze-
ichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680)
oder Port Sharing Device (JP5681) einstecken.
RoHS Compliant
JP5740 (Warm White)
INSTRUCTIONS
• White plastic band (1") identifies Warm White light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande blanche en plastique (2,54 cm) identifie la lumière blanc chaud.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color blanco (2,54 cm) en cable identifica luz blanco cálido.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Weißes Kunststoffband (2,54 cm) kennzeichnet warmweißes LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die
LED an der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT
gekennzeichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub
(JP5680) oder Port Sharing Device (JP5681) einstecken.
JP5741 (Cool White)
INSTRUCTIONS
• Light Blue plastic band (1") identifies Cool White light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande bleu clair en plastique (2,54 cm) identifie de la lumière blanc froid.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color azul claro (2,54 cm) en cable identifica luz blanco frio.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Hellblaues Kunststoffband (2,54 cm) kennzeichnet kaltweißes LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die
LED an der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT
gekennzeichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub
(JP5680) oder Port Sharing Device (JP5681) einstecken.
JP5742 (Yellow)
INSTRUCTIONS
• Yellow plastic band (1") identifies Yellow light.
• Remove release paper from back of LED and stick on where desired. Insert Plug into
LIGHT Port on a Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) or
Port Sharing Device (JP5681) until locking tabs click.
INSTRUCTIONS
• La bande jaune en plastique (2,54 cm) identifie la lumière jaune.
• Retirez le papier anti-adhésif de l’arrière de la LED et collez. Insérez la fiche dans port
LIGHT sur un Light Hub (JP5700, JP5701), Sequencing Light Hub (JP5680) ou Port
Sharing Device (JP5681) jusqu’au verrouillage des onglets cliquez sur l’endroit.
INSTRUCCIONES
• Banda de plástico color amarillo (2,54 cm) en cable identifica luz amarillo.
• Retire el papel de la parte posterior de la luz y pegar en donde desee. Inserte el
enchufe en el puerto LIGHT en un Light Hub (JP5700, JP5701), Sequencing Light
Hub (JP5680) o Port Sharing Device (JP5681) hasta que haga clic en su lugar en las
pestañas de bloqueo.
ANWEISUNGEN
• Gelbes Kunststoffband (2,54 cm) kennzeichnet gelbes LED-Licht.
• Ziehen Sie das Deckpapier von der Rückseite der LED ab und kleben Sie die
LED an der gewünschten Stelle fest. Stecker bis zum Einrasten in die mit LIGHT
gekennzeichnete Buchse am Light Hub (JP5700, JP5701), Sequencing Light Hub
(JP5680) oder Port Sharing Device (JP5681) einstecken.
Produktspezifikationen
Marke: | Woodland Scenics |
Kategorie: | Modelbouw |
Modell: | JP5742 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Woodland Scenics JP5742 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Modelbouw Woodland Scenics
16 August 2024
16 August 2024
15 August 2024
14 August 2024
10 August 2024
10 August 2024
8 August 2024
7 August 2024
7 August 2024
7 August 2024
Bedienungsanleitung Modelbouw
- Modelbouw Voltcraft
- Modelbouw Chicco
- Modelbouw Carson
- Modelbouw Reely
- Modelbouw Revell
- Modelbouw Viessmann
- Modelbouw BRIO
- Modelbouw Playmobil
- Modelbouw FALLER
- Modelbouw Geomag
- Modelbouw Graupner
- Modelbouw Kibri
- Modelbouw Lego
- Modelbouw Marklin
- Modelbouw Multiplex
- Modelbouw Pocher
- Modelbouw SAB Heli Division
- Modelbouw Wiking
- Modelbouw Wilesco
- Modelbouw Piko
- Modelbouw Roco
- Modelbouw Blade
- Modelbouw ISDT
- Modelbouw Brawa
- Modelbouw Italeri
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
18 September 2024
Playmobil City Action Money Transport Vehicle 5566 Bedienungsanleitung
18 September 2024
18 September 2024
Kibri 38915 H0 Stadtmauer mit Rundturm in Weil Bedienungsanleitung
18 September 2024
17 September 2024
16 September 2024
16 September 2024
15 September 2024
9 September 2024