Wilson Electronics Pro 70 Plus Bedienungsanleitung
Wilson Electronics
TV-Signalverstärker
Pro 70 Plus
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wilson Electronics Pro 70 Plus (40 Seiten) in der Kategorie TV-Signalverstärker. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
ENGLISH FRANÇAIS
Contents:
How Cellular Boosters Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 & 4
Outside Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the Inside Panel Antenna(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing The Signal Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Finding The Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Post Install Setup / LCD Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back
Note: This manual contains important safety and operating information. Please read and follow the
instructions in this manual. Failure to do so could result in damage to your Signal Booster.
Appearance of device and accessories may vary.
INSTALLATION GUIDE
In-Building
SmarTech ®
Cellular Signal Boosters
PRO 70 PLUS™
-50 Ohm
PRO SERIES
1Contact Wilson Electronics Customer Support Team with any questions at
866-294-1660 or email: tech@wilsonelectronics.com
ENGLISH
1. Select a location on the roof or outside of the building to install the outside antenna. Refer
to pages 3 & 5.
2. Select a location to install the Signal Booster that is away from excessive heat,
direct sunlight or moisture, and has adequate ventilation. Airtight enclosures are not
recommended. Booster should be as close to the outside antenna as possible in order to
minimize losses from cable length to outside antenna.
3. Connect the cable from the outside antenna to the signal booster’s “outside antenna”
Install Overview
Refer to Installation Diagram on page 3 & 4. Contact Wilson Electronics Technical Support
Team with any questions at 866-839-9361.
How a Cellular Booster Improves Indoor Signals
Wilson cellular signal booster systems work as follows: an outdoor antenna placed
on a
building where some cell signal is present, (ideally on a roof or pole), receives and sends
that weak signal via coax cable (like used in satellite TV installs) to a signal booster located
indoors. That weak signal is amplified by the booster and delivered via coax cable to an
inside antenna(s) which rebroadcasts the amplified signal within one or several areas where
improved signal is required. Signals from indoor cell device(s) are likewise picked up by the
inside antenna(s), amplified by the signal booster and transmitted back to the cell tower via
the outside antenna. The improved signals result in reliable cellular connections
for indoor users.
About Gain and Improved Signal Area
The less signal strength at the outside antenna’s location and/or the greater the coverage
need, the more gain will be required. Conversely, the more signal present outside, the
greater the inside coverage area will be. Proper aiming of the outside antenna towards the
source of the cell signal is also important. The gains of the outside and inside antenna,
though reduced by losses from coax cable lengths, also affect area of improved coverage.
Placement of the inside antenna is also a factor as they have directional characteristics.
Inside wall materials will also affect indoor coverage area.
Another important factor affecting coverage area is inadequate isolation between outside
and inside antenna(s). Wilson boosters are designed to reduce their internal gain in
order to prevent any feedback “oscillations” which if unchecked, could affect nearby cell
site operation. The LCD status display on the booster is used to determine if a booster
is operating at optimal gain for each cellular band. Optimal gain can be achieved by
increasing antenna separation, i.e. isolation, until the max gain is indicated. If attainable
separation is limited by a building’s layout, gain will suffer. A nearby cell site, even if not
providing service to a user, can also cause the booster’s automatic network protection
circuitry to reduce gain or even turn off one or more of the booster’s bands so as to
prevent signal overload to the nearby site. The display on the booster can also be used
to determine if this condition is taking place. Refer to pages 9-11 for explanation of the
booster status display.
2
Contact Wilson Electronics Customer Support Team with any questions at
866-294-1660 or email: tech@wilsonelectronics.com
ENGLISH
connector. Refer to page 6 for more information on running cable. Lightning Surge
Protection is recommended for all in-building installations. Refer to pages 3 & 6.
4. Select a location for the inside antenna. Try to choose a position in the center of the area
needing improved signal. Keep in mind that proper inside antenna to outside antenna
isolation is necessary for the system to function properly. This may require as much as
50 to 75 feet of horizontal separation from the outside antenna. Vertical separation
also helps increase isolation. Alternate means of isolation are possible. If physical
separation is not possible, please contact Wilson Electronics Tech Support at
866-839-9361 for suggestions on alternate methods to achieve isolation.
5. Connect the cable from the inside antenna to the signal booster’s “inside antenna”
connector. Refer to page 6 for more information on running cable. Keep cable runs as
short as possible to reduce signal loss in the system.
6. Before powering up the signal booster, verify that both the outside antenna and the
inside antenna are connected correctly, and check that all connections are tight. Note:
Be careful when plugging the connectors in so as not to bend the center pins on the
connectors.
7. Power on the signal booster by plugging in the included power supply. If the lights are
not green, please refer to pages 10-11.
Pro 70 Plus 2’ LMR 400 Lightning Surge
Protector
Wide Band Directional
Antenna 75’ LMR 400
Wide Band Panel Antenna
60' LMR 400
463127 Kit
463227 Kit
Pro 70 Plus AC/DC
Power Supply
12V/3A
AC/DC
Power Supply
12V/3A
2’ LMR 400 Lightning Surge
Protector
Wide Band Directional
Antenna 75’ LMR 400
463327 Kit
Pro 70 Plus
AC/DC
Power Supply
12V/3A
2’ LMR 400 Lightning Surge
Protector
4G Dome Ceiling Antenna
60’ LMR400 Cable
4G Dome Ceiling Antenna
60’ LMR400 Cable
e Ceiling Anten
Multiple Kit Options Available Note: Kits may contain diff erent accessories
To purchase Expansion Kits call Wilson Electronics Sales Department at: 888-503-5329
4G Omni Plus
Antenna 75’ LMR400
Cable
Produktspezifikationen
| Marke: | Wilson Electronics |
| Kategorie: | TV-Signalverstärker |
| Modell: | Pro 70 Plus |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wilson Electronics Pro 70 Plus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung TV-Signalverstärker Wilson Electronics
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
Bedienungsanleitung TV-Signalverstärker
- TV-Signalverstärker Hama
- TV-Signalverstärker LogiLink
- TV-Signalverstärker SilverCrest
- TV-Signalverstärker TechniSat
- TV-Signalverstärker Velleman
- TV-Signalverstärker Devolo
- TV-Signalverstärker König
- TV-Signalverstärker Sharp
- TV-Signalverstärker Meliconi
- TV-Signalverstärker One For All
- TV-Signalverstärker Goobay
- TV-Signalverstärker Astro
- TV-Signalverstärker Kathrein
- TV-Signalverstärker HQ
- TV-Signalverstärker EVOLVEO
- TV-Signalverstärker RCA
- TV-Signalverstärker Mikrotik
- TV-Signalverstärker Hirschmann
- TV-Signalverstärker Steren
- TV-Signalverstärker Triax
- TV-Signalverstärker Winegard
- TV-Signalverstärker Epcom
- TV-Signalverstärker Axing
- TV-Signalverstärker Wentronic
- TV-Signalverstärker ZBoost
- TV-Signalverstärker Antennas Direct
- TV-Signalverstärker Televes
- TV-Signalverstärker SureCall
- TV-Signalverstärker Wilson
- TV-Signalverstärker SmoothTalker
Neueste Bedienungsanleitung fĂĽr -Kategorien-
8 Oktober 2024
8 Oktober 2024
8 Oktober 2024
20 September 2024
13 September 2024
8 September 2024
7 September 2024
4 September 2024
2 September 2024
2 September 2024