Wilson Electronics NMO Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Wilson Electronics NMO (4 Seiten) in der Kategorie TV-Antenne. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
Installation
NMO Mount
Antenna
• Vehicle use
• Installs Easily
• Permanent installation
• Requires antenna adapter (sold separately)
• Compatible with Wilson Electronics Signal Booster
(sold separately)
1
How it Works
Wilson Electronics NMO Mount antenna will collect the cell tower signal and send it through
the cable to a signal booster or directly to the cell phone or cellular data card. When the
cellular device transmits, the signal is transferred to a signal booster or directly to the
antenna and broadcasted back to the cell tower. See the back cover for information on
Wilson Electronics Signal Boosters. An external adapter is required to connect the cell
phone or cellular data card to the antenna.
The external adapter is cell phone/data card-specific and may be purchased through a
local retailer. Refer to Wilson Electronics Adapter Guide to identify the right adapter for your
cell phone or cellular data card. The Adapter Guide is available through a local retailer. It
is also available on our web site, www.WilsonElectronics.com, or you may call Technical
Support at 866-294-1660.
Feed the cable end
(FME) into hole
from outside.
Step 1:
Step 2:
Gently feed NMO
connector through
hole until flush.
For installing Âľ in NMO:
Installing optional NMO Mounts
For installing the NMO Trunk Mount
Antenna (sold separately):
(Part# 901102) (Part# 901101)
Wilson Electronics Signal Boosters Amplify Coverage
When used in conjunction with your antenna, a Wilson Signal Booster can improve
your cell phone and laptop data card coverage area up to 20 times. Wilson Electronics
manufactures a wide range of wireless and direct connect Signal Boosters for mobile or in-
building use. See your dealer for details or visit www.WilsonElectronics.com.
Contact Wilson Electronics Technical Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.
Select a location on the trunk or the 1.
hood for mounting the antenna.
Slide the trunk mount bracket on 2.
the trunk or hood lip in the selected
location, and tighten the two set
screws on the bottom lip underneath
the trunk or hood lip with the Allen
wrench provided.
Route the cable between the mount 3.
and phone location.
Screw the antenna coil into place.4.
Inside of
Trunk
Trunk lid
NMO Trunk
Mount Antenna
Car Diagram
2
Select a location for mounting the antenna. The best
location would be centered on the vehicle roof, although
other locations are acceptable.
Roof mount only: For mounting the antenna to the roof of
your vehicle, use Wilson Electronics part #901102 (3/4”)
or #901103 (3/8”), which must be purchased separately
(A). Drill a hole in the desired location for mounting. The
size of the hole should be 3/8” or 3/4”, depending on the
type of mount purchased.
The plastic washer (B) should be placed over the
threads of the NMO mount (A). From the inside of the
vehicle, insert the threaded portion of the mount up
through the hole in the vehicle.
From the top of the vehicle, screw the threaded nut
(C) onto the mount threads coming up through the
roof and tighten until secure.
The black rubber washer (D) should now be
positioned around the threaded nut.
Working from the inside of the vehicle, securely
route and position the cable provided with your
mount to your signal booster or cell phone.
Screw the NMO antenna assembly (E) into place on
top of the vehicle. Part# 301105
1
2
3
4
5
Installing the NMO Mount Antenna
E
D
C
B
A
Vehicle Mounting Surface
A. Roof Mount
B. Plastic Washer
C. Threaded Nut
D. Rubber Washer
E. NMO Antenna
F. Trunk Mount
Trunk Mount Part # 901101 F
6
7
â…ś NMO Part #901103
Shown above.
Contact Wilson Electronics Technical Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com Hours: 7am to 6pm MST.
Produktspezifikationen
| Marke: | Wilson Electronics |
| Kategorie: | TV-Antenne |
| Modell: | NMO |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wilson Electronics NMO benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung TV-Antenne Wilson Electronics
31 August 2024
Bedienungsanleitung TV-Antenne
- TV-Antenne Exibel
- TV-Antenne Hama
- TV-Antenne Nedis
- TV-Antenne Philips
- TV-Antenne Clas Ohlson
- TV-Antenne TechniSat
- TV-Antenne Schwaiger
- TV-Antenne EMOS
- TV-Antenne Thomson
- TV-Antenne Blaupunkt
- TV-Antenne King
- TV-Antenne Telestar
- TV-Antenne Meliconi
- TV-Antenne One For All
- TV-Antenne Shure
- TV-Antenne Megasat
- TV-Antenne GoGEN
- TV-Antenne Strong
- TV-Antenne Imperial
- TV-Antenne Garmin
- TV-Antenne Sencor
- TV-Antenne Icy Box
- TV-Antenne TOA
- TV-Antenne Xoro
- TV-Antenne Zebra
- TV-Antenne TP-Link
- TV-Antenne Kathrein
- TV-Antenne President
- TV-Antenne Alpine
- TV-Antenne Edimax
- TV-Antenne Uniden
- TV-Antenne Clarion
- TV-Antenne Audiovox
- TV-Antenne EVOLVEO
- TV-Antenne August
- TV-Antenne LevelOne
- TV-Antenne Cisco
- TV-Antenne Intellinet
- TV-Antenne Mikrotik
- TV-Antenne DeLOCK
- TV-Antenne Digi
- TV-Antenne Hirschmann
- TV-Antenne Maximum
- TV-Antenne Steren
- TV-Antenne Winegard
- TV-Antenne Terk
- TV-Antenne RetroSound
- TV-Antenne Monster
- TV-Antenne Metra
- TV-Antenne Lectrosonics
- TV-Antenne Wentronic
- TV-Antenne Audix
- TV-Antenne Antennas Direct
- TV-Antenne Wireless Solution
- TV-Antenne Majestic
- TV-Antenne Hawking Technologies
- TV-Antenne RF Elements
- TV-Antenne IC Intracom
- TV-Antenne Whistler
- TV-Antenne Mohu
Neueste Bedienungsanleitung fĂĽr -Kategorien-
16 Oktober 2024
9 Oktober 2024
4 Oktober 2024
30 September 2024
18 September 2024
18 September 2024
11 September 2024
7 September 2024
5 September 2024
4 September 2024