WEN 4276 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für WEN 4276 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
2
CONTENTS
Technical data…..………………………………………………………... 2
General safety rules…….………………………………………………... 3
Specific safety rules for bench grinder..…………………………………. 5
Electrical information…………………………………………………..... 7
Carton contents.………………………………………………………….. 9
Know your bench grinder………………………………………………... 10
Assembly………………………………………………………………… 11
Operation……………………………………………………………….... 12
Maintenance……………………………………………………………… 13
Exploded view………………………………………………………… 14
Parts list………………………………………………………………….. 15
Warranty…………………………………………………………………. 16
TECHNICAL DATA
6" Bench Grinder
Model: 4276
Motor: 120 V, 60 Hz, 2.1A, 1/3 HP
Speed: 3450 RPM (no load)
Wheel size: 6"x3/4"
Arbor size: 1/2"
Wheel Grits: #36 (Coarse) / #60 (Medium)
Lamp: 120V, 40W (Bulb not included)
Weight: 16 lb
GENERAL SAFETY RULES
GENERAL SAFETY INSTRUCTIONS
Operating a bench grinder can be sense are ignored. The operator must be dangerous if safety and common
familiar with the operation of the tool. Read this manual to understand this bench grinder. DO NOT operate
this Bench Grinder if you do not fully understand the limitations of this tool. DO NOT modify this bench
grinder in any way.
BEFORE USING THE BENCH GRINDER
WARNING: To avoid serious injury and damage to the tool, read and follow all of the Safety and
Operating Instructions before operating the Bench Grinder.
WARNING:
1. SOME DUST created by using power tools contains chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks, cement, and other masonry products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area with approved safety equipment such as dust
masks specially designed to filter out microscopic particles.
2. READ the entire owner’s manual. how to use the tool for itsLEARN intended applications.
3. GROUND ALL TOOLS. If the tool is supplied with a lugged into a three-prong plug, it must be p
three-contact electrical receptacle. The third prong is used to ground the tool and provide protection
against accidental electric shock. DO NOT remove the third prong.
4. AVOID A DANGEROUS WORKING ENVIRONMENT. DO NOT use electrical tools in a damp
environment or expose them to rain.
5. sence of flammable liquids or ga DO NOT use electrical tools in the pre sses.
6. ALWAYS keep the work area clean, well-lit, and organized. DO NOT work in an environment with
floor surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT permit people to be in the immediate work
area, especially when operating the electrical tool.
8. DO NOT FORCE THE TOOL to perform an operation for which it was not designed. The tool will do
a safer and higher quality job by only performing operations for which it was intended.
9. WEAR PROPER CLOTHING. DO NOT wear loose clothing, gloves, neckties, or jewelry. These
items can get caught in the machine during operations and pull the operator into the moving parts.
Longhaired users must wear a protective cover on their hair to prevent it from contacting any moving
parts.
10. CHILDPROOF THE WORKSHOP AREA by removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. DO NOT use electrical tools in the presence of flammable liquids or gasses.
3


Produktspezifikationen

Marke: WEN
Kategorie: Nicht kategorisiert
Modell: 4276

Brauchst du Hilfe?

Wenn Sie Hilfe mit WEN 4276 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert WEN

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-