Walrus Audio Melee Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Walrus Audio Melee (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Two of the most quintessential effects that helped
defined the shoegaze genre, reverb and distortion,
have been harnessed and woven together for an
eternity of ethereal distortion with The Melee: Wall
of Noise. The Melee unapologetically uses a joystick
to meld reverb and distortion together into one
massive blaze of sound.
VOLUME
The Vol” knob sets the overall output
volume of the pedal.
POWE R S TUF F
TONE
Control the tone of both the distortion and
reverb simultaneously. Left is the normal tone
setting, middle is the dark tone setting, and
right is the brightest tone setting.
DECAY
Control the decay time of the reverb. Left is
minimum decay, middle is medium decay,
right is max decay.
SECONDARY CONTROL
Hold down the bypass stomp switch and
adjust the amount of modulation applied to
the wet signal by moving the decay toggle.
Left position is no modulation, middle is
slight modulation at 33RPM, and right is high
modulation at 45RPM.
Got questions or need a repair?
Email help@walrusaudio.com to talk with a
real live human about your Walrus gear!
This product comes with a limited lifetime warranty. for more info.Click Here
9 volt DC, Center Neg.
200mA min*
*The use of an isolated power supply is
recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Note: In Reverse Reverb (Blue LED), Decay
sets the amount of feedback instead of the
decay time.
D>R | R>D
Next to the joystick, this is where some of
the special sauce comes in. Select the order
that the distortion and reverb are set, while
running in series in the Melee. To the left sets
the distortion running first in series into the
Reverb. To the right sets the Reverb running
first in series into the Distortion.
The overall effect of the pedal will vary
depending on which way you set the toggle.
In D>R notes and chords will maintain their
clarity like a traditional pedalboard setup,
but in R>D notes and chords are muddied to
create a powerful wall of sound. The range of
the joystick will interact slightly differently
because of this order change as well.
JOYSTICK
(This is the really fun part.) Choose your own
adventure with your custom mix of distortion and
reverb. Control both the amount of distortion and
the reverb dry/wet mix by using the joystick on an
X-Y axis. The X (left & right) axis will set the amount
of reverb mix, with left being fully dry and right
being fully wet. The Y (up & down) axis will set
the amount of distortion of the pedal, with down
being fully clean, and up being fully distorted.
REVERB PROGRAMS
The Melee is equipped with three different reverb programs,
which can be changed by simultaneously pressing the bypass and
sustain stomp switches. Experiment with the order switch to hear
how differently these all react in-front and after the distortion!
Ambient Reverb (Pink LED)
Huge reverb capable of massive trails and engulfing your
chords into an angry wash of sound. Great for soaring
melodic lines or shoegaze driven chord progressions.
Octave Down Reverb (Yellow LED)
Similar to the Dark mode in the Slö, you’ll find an eerie
lower octave hovering in the reverb trail for a nice and
dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED)
Add reversed reverb trails back into your signal, create
gentle melodies or push into reverse feedback overload.
Big, slow and sad chords love to hang out here.
When the pedal is off,
press & hold
BYPASS to temporarily activate
the pedal for a moment of texture.
Release bypass to turn off again
and effect will fade out.
Hold
the SUSTAIN switch to ramp
up the reverb trail to maximum,
creating a long trail. The trail will
ramp back down when released.
Press & Release
to latch the
current reverb decay. Press again
to release the latch.
MOMENTARY
FEATURES


Produktspezifikationen

Marke: Walrus Audio
Kategorie: Nicht kategorisiert
Modell: Melee

Brauchst du Hilfe?

Wenn Sie Hilfe mit Walrus Audio Melee benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Walrus Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-