Walrus Audio Iron Horse V3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Walrus Audio Iron Horse V3 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
FACE BVBA • HOEK 76 2850 BOOM • +32 3 844 97 • H.R. ANTWERPEN 291868 • 481 •- UNIT 301 - 67 VAT/TVA/BTW 0448 180 INFO@FACE-BE.EU
WALRUS AUDIO IRON HORSE V3 (High-Gain Distortion)
• Item: 588 48
• EAN: 810424033276
• Packaging dimensions: 14.6 x 10.7 x 6.4 cm
• Weight: 0.44 kg
• Pictures Translations User Manual | |
Need to know for Retailers
• V update of Iron Horse high-gain distortion pedal 3
• Major new feature: blend between symmetrical silicon and diode clipping for a new variety of tones
o Silicon clipping diodes = high amount of compression
o LED clipping diodes = smaller amount of compression
• Very responise to the dynamics of your playing, unlike most distortions which swallow up all dynamics
• Classic distortion thick, punchy, riffy & rowdy –
Full Feature List
• Classic distortion circuit
• V3 update of original Iron Horse pedal
• Very responsive to the dynamics of your playing and guitar
• Si/LED knob to blend between Silicon (high compression) and LED (less compression) clipping diodes
• Combination of blend & distortion knob opens up a wealth of ways to alter your tone
• From clear overdrive to thick & punchy full-on distortion
• Controls level, tone, distortion, Si/LED blend :
• Top mounted jacks
• Soft relay true bypass
• 9-volt DC, Center Negative, 10 mA
• Power Supply not included
• Made in the USA
FACE BVBA • HOEK 76 2850 BOOM • +32 3 844 97 • H.R. ANTWERPEN 291868 • 481 •- UNIT 301 - 67 VAT/TVA/BTW 0448 180 INFO@FACE-BE.EU
Description
The Iron Horse is our take on a classic distortion circuit that’s thick, punchy, riffy, and rowdy. With the help
of the Si/LED knob and wide range of the distortion knob, this true bypass, high-gain behemoth can be
finely tuned for clear overdriven sounds or let the reigns loose for a full-on distorted onslaught.
Top mount jacks with soft switch bypassing and art by David Hüttner complete the package for a pedal
board-ready distortion machine.
The Iron Horse V3 updates are as follows:
• Top-mounted jacks
• Soft relay true bypass on/off
• Fixed volume drop-off when the distortion knob is at minimum
• Re-imagined the hard clipping toggle as a blend style potentiometer, that allows you to blend between
symmetrical silicon and diode clipping for a new variety of tones.
Owners of the previous versions of the Iron Horse will be familiar with the three distortion modes operated
by a toggle switch to change between different clipping modes. The switch has now been replaced with a
blending knob opening up a wealth of ways to alter your tone.
When the knob is set to the left, the distorted signal will be using Silicon clipping diodes adding in a high
amount of compression. Rotating the knob to the right will bring in LED clipping and a smaller amount of
compression. Putting the knob at noon will blend between the two using different ratios of the Silicone and
LED clipping diodes for more complex clipping sounds.
Note: Since the Si/LED knob is changing the internal gain and clipping style, the other controls will behave
slightly differently as well. You will need to use the volume knob to adjust the overall output up or down
depending on where you have the knob set.
Find ads, images, translations, manuals here
FACE BVBA • HOEK 76 2850 BOOM • +32 3 844 97 • H.R. ANTWERPEN 291868 • 481 •- UNIT 301 - 67 VAT/TVA/BTW 0448 180 INFO@FACE-BE.EU
User Manual
LEVEL Controls the output level. –
TONE Allows specific adjustment of high-end/treble frequencies. Turn clockwise to increase high/treble –
frequencies and counterclockwise to decrease high/treble frequencies.
DISTORTION Adjusts the distortion output. Turn clockwise to increase the amount of distortion. As it is –
increased, the signal becomes louder, thicker, and more distorted. Turn counterclockwise to decrease the
amount of distortion.
Si/LED KNOB Blend between Silicon and LED clipping. When the knob is set to the left, the distorted signal –
will be using Silicon clipping diodes adding in a high amount of compression. Rotating the knob to the right
will bring in LED clipping and a smaller amount of compression. Putting the knob at noon will blend
between the two using different ratios of the Silicon and LED clipping diodes for more complex clipping
sounds.


Produktspezifikationen

Marke: Walrus Audio
Kategorie: Nicht kategorisiert
Modell: Iron Horse V3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Walrus Audio Iron Horse V3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Walrus Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-