Voxx AWS53 Bedienungsanleitung

Voxx Lautsprecher AWS53

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Voxx AWS53 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Introduction
The Acoustic Research Portable Wireless Speaker with 3.5mm jack lets you enjoy your music
anywhere, at home or on the go, with two ways to connect to your music. The 900MHz wireless
transmitter gives you 150ft* of room to roam from your audio source, great for outdoor
entertaining at home, with crystal-clear wireless audio. The speaker’s 3.5mm jack offers
a convenient connection option to use anywhere you go—just connect your MP3 player or
smartphone to the speaker, and enjoy!
This manual covers various connection options and detailed operating instructions for making
the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the
instructions, you have any questions, please call toll-free 1-800-732-6866 or visit
www.acoustic-research.com.
*Range may vary according to environment.
Important Information
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user
i[hl_Y[WXb[fWhji_di_Z[$H[\[hi[hl_Y_d]jegkWb_Ó[Zi[hl_Y[f[hiedd[b$
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the
serial and model numbers in case you need them. These numbers are located on the product.
Model No.: _____________________________________________________________________________________________
Purchase Date: _________________________________________________________________________________________
Dealer/Address/Phone: __________________________________________________________________________________
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow a ll i ns tr uc ti on s.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-$:edej_dijWbbd[WhWdo^[WjiekhY[iikY^WihWZ_Wjehi"^[Wjh[]_ij[hi"ijel[i"ehej^[hWffWhWjki_dYbkZ_d]Wcfb_Ó[hij^Wj
produce heat.
8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
'&$H[\[hWbbi[hl_Y_d]jegkWb_Ó[Zi[hl_Y[f[hiedd[b$I[hl_Y_d]_ih[gk_h[Zm^[dj^[WffWhWjki^WiX[[dZWcW][Z_dWdo
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Care and Maintenance
7bmWoiki[Wie\jYbej^jeYb[Wdj^[if[Wa[hWdZjhWdic_jj[h$D[l[hki[WdofheZkYjYedjW_d_d]WbYe^ebehej^[hiebl[dji
as they may damage the surface.
Ki[YWkj_edm^[dfbk]]_d]j^[fem[hjhWdi\ehc[hi_dWd79ekjb[jjeWle_Zj^[h_iae\[b[Yjh_Yi^eYa$
?\j^[if[Wa[hWh[ki[Zekji_Z[edWZ[YaehfWj_e"cWa[ikh[oekjWa[j^[c_dZeehi_dj^[[l[dje\WhW_dijehcje
prevent possible damage.
:edejef[hWj[ehijeh[j^[ioij[c_d[njh[c[j[cf[hWjkh[iX[bem)(±<%&±9WdZWXel['((±<%+&±9$
L M R
DC
IN
Tour of the Speaker System
Speaker
Front Panel
POWER/LINKED indicator (not shown) blinks
m^[dj^[if[Wa[h_iÓhijfem[h[Zed1_jjkhdiieb_Z
blue when the speaker is tuned to the transmitter
Rear Panel
Bass Boost button turns the speaker’s bass
enhancement on and off
Power button turns the speaker on and off
Auto Scan button rescans for the transmitter’s
signal
Volume +/– buttons adjust the volume level
Bottom Panel
L/M/R switch determines if the speaker plays sound
in mono as a stand-alone speaker, or plays the left or
right track in a stereo pair with an additional AWS53
DC IN receives the small round end of one of the
_dYbkZ[Z/L'(&&c779fem[hWZWfj[hi1h[cel[j^[
protective cover to insert the adapter
AUDIO IN connects directly to your MP3 player,
smartphone, or other portable audio device, using
the 3.5mm audio in cable provided
Battery Compartment Cover (not shown)
remove to install 6 AA batteries
Carrying
handle
Transmitter
SIGNAL indicator lights green when the audio is
present and the transmitter is broadcasting
POWER indicator lights when the transmitter is on
CHANNEL 1 2 3b[jioekÓdZj^[X[ijjhWdic_ii_ed
frequency for your environment
DC IN jack receives the small round end of the
included 12V 200mA AC power adapter
AUDIO IN (R / L) connects to your sound source
using one of the connection options shown here
Back panel
DC IN
CHANNEL
1 2 3
R AUDIO L
IN
SIGNAL POWER
Top panel
Model AWS53
Installation and Operation Manual
PORTABLE
Wireless
Speaker
WITH 3.5MM JACK
Tour of the Speaker System
3.5mm audio in cable
Included Accessories
Note: These power units should be
plugged in so that they stay vertical
ehb_[ÔWj$
Connecting the Speaker System
Connecting the Speaker System
Powering the Transmitter
Connect the small, round plug from the transmitter AC
power adapter to the transmitter’s DC IN jack. Plug the
other end of the transmitter AC power adapter into any
standard 120V AC wall outlet.
Note: Be sure to use the AC power adapter rated 12V DC
200 mA (it has the smaller diameter plug).
Connecting to an Audio Source
Connecting to an MP3 player, smartphone, or other portable audio
device
This speaker offers two ways to listen to audio from a portable audio device: using the wireless
transmitter or connecting directly to the audio source.
Using the wireless transmitter
1. Plug the stereo plugs on the provided Y-adapter audio cable
into the AUDIO IN jacks on the back of the transmitter.
2. Plug the mini-plug end of the provided Y-adapter into the
headphone output of your MP3 player or other portable audio
device.
Using a direct connection
1. Connect one end of the provided 3.5mm audio in cable to the
AUDIO IN jack on the bottom of the speaker.
2. Connect the other end of the cable to the headphone output
on your MP3 player or other portable audio device.
Warning: This product is designed to work with line level outputs or headphone outputs only.
DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.
Connecting to an A/V Receiver
AC Power Adapters
1. Insert the small, round plug from the speaker AC
power adapter into the DC IN jack on the bottom of
the speaker.
2. Plug the other end of the speaker AC power adapter
into any standard 120V AC wall outlet.
Note: Be sure to use the speaker AC power adapter rated 9V DC 1200 mA.
Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet
environments, such as rain, mist, dew, etc. In other words, you can take it out, just don’t leave it out.
To avoid electrical shock, use this product with caution near water sources if powered with the
AC adapter. Never submerge in water.
AA Batteries
1. Remove the battery compartment cover on the bottom of the speaker.
2. Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”)
as diagrammed inside the battery compartment.
3. Replace the battery compartment cover on the bottom of the speaker.
Note: Place the rubber cap in the speaker power input jack when using batteries.
DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline
battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when
not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or
dispose of them in accordance with local and national regulations.
Powering the Speaker
There are two options to power your wireless speaker: using the included AC power adapter or
using 6 AA batteries (not included).
$
Audio source
Speaker
(bottom panel)
3.5mm
audio in cable
1. Plug the stereo plugs on the provided Y-adapter audio
cable into the AUDIO IN jacks on the back of the
transmitter (make sure to match the colors on the plugs
and jacks).
2. Plug the mini-plug end of the provided Y-adapter into a
mini-jack to RCA adapter (not included).
3. Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right
audio outputs of your A/V receiver, amp, or other audio source.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged
in and powered at all times. If you will not be using the AWS53 for an extended period of time,
unplug the transmitter AC power adapter.
2. Set the channel select switch on the back of the transmitter
to one of the transmitter’s three broadcast frequencies: 1,
2 or 3. If you experience poor reception or interference, try
choosing a different frequency by moving the channel select
switch to another position.
When the transmitter is receiving an audio signal and is
ready, the SIGNAL indicator turns solid green.
DC INCHANN EL
1 2 3
R AUDIO L
IN
Channel
select
switch
Adjusting the Transmitter
1. Turn on your audio source (for example, A/V receiver, MP3 player, stereo, etc.) and play
music at a normal listening volume.
Note
If the SIGNAL indicator on the transmitter does not turn on, please check the following:
 2^]a\cWTcaP]b\XccTa02_^fTaPSP_cTaXbbTRdaT[hR^]]TRcTS
 2^]a\cWTRPQ[TUa^\cWTcaP]b\XccTaXbbTRdaT[hR^]]TRcTSc^cWTPdSX^b^daRT^dc_dc
(MP3 player, A/V receiver, etc.).
 2^]a\cWTPdSX^b^daRTXb_[PhX]VPdSX^P]SXbcda]TSd_
Using the Speaker System
About Variable-Level Audio Outputs:
A variable-level output, such as a headphone jack or certain RCA-type outputs, provides an
audio signal that changes with the volume level set on the audio source. As the volume of the
audio source is adjusted up and down, so is the audio signal strength sent to the transmitter.
This can affect the quality of sound generated by the speaker, and may require an adjustment
of the volume level of the audio source to produce a signal strong enough for the transmitter.
Hint: On most bookshelf-type or compact stereo systems, inserting a headphone plug into
the headphone jack results in automatic cutoff of the regular, or hard-wired speakers.
Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which
^Uh^daCEPdSX^^dc_dcbXbgTSaTUTac^cWTCEX]bcadRcX^]\P]dP[B^\TCEbWPeT
^dc_dcbcWPcRP]bfXcRWQTcfTT]ePaXPQ[TP]SgTSFWT]VXeT]PRW^XRTgTSXbP[fPhb
recommended.
Troubleshooting
The following troubleshooting guide takes you through some of the more common problems
associated with the installation and/or operation of a wireless system. If the problem persists,
please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com.
Issue: Cause and solution:
No sound 9^[Yaj^Wjj^[jhWdic_jj[h79fem[hWZWfj[h_i\kbbo_di[hj[Z_djej^[mWbbekjb[jWdZ
j^[fem[hYehZ\hecj^[79WZWfj[h_iÓhcboYedd[Yj[Zjej^[jhWdic_jj[hfem[h
input jack.
9edÓhcj^Wjj^[if[Wa[h_ijkhd[ZedWdZjkd[Zjej^[jhWdic_jj[hÆ
the indicator light on the front of the speaker should be solid blue (not blinking).
?\oekÊh[ki_d]j^[fem[hWZWfj[hi"YedÓhcj^WjXej^\ehj^[if[Wa[hWdZ\ehj^[
transmitter) are fully inserted into their wall outlets and the adapter power cords are
ÓhcboYedd[Yj[Zjej^[fem[h_dfkj`WYaiedj^[jhWdic_jj[hehif[Wa[h$
or
?\oekÊh[ki_d]XWjj[h_[i\ehj^[if[Wa[h"Y^[Yaj^Wjj^[oWh[\h[i^WdZ_di[hj[Zm_j^
correct polarity (+, –).
9^[Yaj^Wjj^[WkZ_eiekhY[Yecfed[djij[h[e"CF)fbWo[h"[jY$_ijkhd[ZedWdZ
transmitting sound as it normally should.
CWa[ikh[j^[lebkc[edoekhWkZ_eiekhY[_ijkhd[Zkf$
9^[Yaj^Wjj^[if[Wa[hlebkc[_ijkhd[Zkf$
?\oekWh[ki_d]WJWf[(Ced_jehekjfkj\hecoekhh[Y[_l[h%WcfWij^[WkZ_e
output, check that you have pressed the Tape Monitor/Tape 2 button on the front of
the receiver. This will turn on the Tape 2 outputs, which may not have been active.
Issue: Cause and solution:
No sound/
distortion/
static
M^[dki_d]XWjj[hofem[h"cWa[ikh[j^[XWjj[h_[iWh[\h[i^WdZh[fbWY[_\
necessary.
9^[Yaj^Wjj^[if[Wa[hÊi_dZ_YWjehb_]^j_iieb_ZXbk[dejXb_da_d]m^[dWdWkZ_e
source is connected to the transmitter
9^Wd][j^[fei_j_ede\j^[Y^Wdd[bi[b[Yjim_jY^'"(eh)jeY^Wd][j^[ef[hWj_d]
frequency. Then press the AutoScan button on the speaker’s back panel to make the
speaker retune.
9^Wd][j^[beYWj_ede\j^[jhWdic_jj[h$FbWY[_jWi^_]^WdZWmWo\heceXijhkYj_edi
as possible. Avoid placing the transmitter directly on top of or behind a TV.
Cel[j^[jhWdic_jj[hWdZif[Wa[hYbei[hje][j^[h$I[dZ_d]j^[i_]dWbj^hek]^
certain materials, such as glass, tile, and metal, can decrease the effective
transmitting distance of the system.
More Helpful Information
About Fixed-Level Audio Outputs
7Ón[Z#b[l[b"ehb_d[#b[l[b"WkZ_eekjfkj_iYedi_Z[h[Z_Z[Wbi_dY[_jfhel_Z[iWdWkZ_ei_]dWb
unchanged by adjustments to the audio source volume control.
Hint: Fixed-level audio outputs from stereo receivers/amps will typically be designated as
Tape (or Record) outputs or DVR/DVD-R audio output connections.
Fixed-level outputs from TVs are usually marked as ‘Constant,’ ‘Fixed,’ or ‘Select.’ If they are not
marked as such, they are probably variable outputs (see “About Variable-Level Audio Outputs” on
j^[d[njfW][$Ekjfkji\hec:L:fbWo[hiWh[WbceijWbmWoiÓn[Z$
Hint: When connecting to the audio outputs of a DVD player, remember that the DVD player
must be showing a TV channel for sound to be produced.
1. Press the Power button on the back of the speaker to
turn it on.
If you’re using the wireless transmitter, the indicator
light on the front of the speaker blinks while the
speaker is tuning to the transmitter. This indicator
light turns solid blue when the speaker is tuned to
the transmitter--you should hear sound coming from
the speaker now.
If the speaker is not tuned or if the Note:
transmitter is not connected properly, the indicator
light will continue blinking. If this occurs, please see
the Troubleshooting section of this manual.
If you’re using a direct connection to your audio source (via audio cable), all you need to do
is start playback on your audio source‚ you should start hearing sound from the speaker.
IMPORTANT: The indicator light on the front of the speaker indicates the status of the
wireless connection only. If you’re not using the transmitter (or if you’re out of range of the
caP]b\XccTaXcfX[[ZTT_Q[X]ZX]Vd]cX[Xc]SbcWTcaP]b\XccTaCWXbXb]^a\P[
2. Adjust the volume on the speaker as desired.
Note: Make sure your audio source is turned up at least to 75 of full volume (but not so %
loud that the sound becomes distorted).
3. If you’re using the wireless transmitter, set up the speaker for mono or stereo operation
using the switch on the bottom of the AWS53 speaker.
a) Monaural operation: The monaural mode (mono) is recommended when using a single
AWS53 by itself. For monaural operation, set the L/M/R switch to “M” on each speaker.
b) Stereo operation: You need an additional AWS53 speaker for the stereo option. Set the
L/M/R switch to “L” on the speaker located to the left from the listener, and set the other
speaker to the “R” position.
Notes:
The speaker automatically retunes if it loses the transmitter’s signal. You can also press the
AutoScan button on the back of the speaker to retune the speaker at any time.
The transmitter turns off automatically if there is no audio signal present for a prolonged period.
Interference in the form of static and/or distortion can sometimes be heard. If this occurs,
R^]a\cWTcaP]b\XccTab_TPZTaPSYdbc\T]cbP]SX]SXRPc^ab8UcWT_a^Q[T\_TabXbcbaTUTac^cWT
Troubleshooting section of this manual.
Using the Speaker System
Turning the Speaker Off
1. Press Power button on the back of the speaker to turn the speaker off.
($9edÓhcj^Wjj^[if[Wa[h_ie\\Xol[h_\o_d]j^Wjj^[_dZ_YWjehb_]^jedj^[if[Wa[hÊi\hedj
panel is no longer illuminated.
Adjusting the Speaker

Produktspezifikationen

Marke: Voxx
Kategorie: Lautsprecher
Modell: AWS53

Brauchst du Hilfe?

Wenn Sie Hilfe mit Voxx AWS53 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Voxx

Voxx

Voxx ARVP26 Bedienungsanleitung

30 August 2024
Voxx

Voxx ARVP600 Bedienungsanleitung

30 August 2024
Voxx

Voxx AWS53 Bedienungsanleitung

30 August 2024
Voxx

Voxx AWSBT8 Bedienungsanleitung

30 August 2024
Voxx

Voxx IPD-SBBT Bedienungsanleitung

30 August 2024
Voxx

Voxx IPD-SB Bedienungsanleitung

30 August 2024
Voxx

Voxx ARIC65 Bedienungsanleitung

27 März 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024