Vitek VT-6407 W Bedienungsanleitung

Vitek Weerstation VT-6407 W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vitek VT-6407 W (32 Seiten) in der Kategorie Weerstation. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
1
8
14
20
26
Weather station
Метеостанция
VT-6407 W
VT-6407_IM_18x14.indd 1 15.05.2013 14:19:35
2
MODE ALARM MEMORY
RESET
'&9
12 3
4 6 8
9
10
11
12
13
14
15
5 7
VT-6407_IM_18x14.indd 2 15.05.2013 14:19:35
3
ENGLISH
3
WEATHER STATION
Before connecting, operating or adjusting the
unit read the instruction carefully. Follow all
warnings and recommendations, specified in
this instruction.
Keep the instruction for further reference.
Safety measures
• Before operating the unit, read the
instruction carefully.
• Do not immerse the units into water.
• Do not use abrasives or substances caus-
ing damage of body and inner unit parts
for cleaning.
• Do not subject the units to impacts (dust
and moisture are also to be avoided), as it
can lead to failures, reduction of service
life, battery damage and to deformation
of the unit body parts.
• If you break the unit, it will lead to war-
ranty cancellation. No parts inside the unit
require user’s attention.
• For children’s safety do not leave polyeth-
ylene bags, used as a packaging, unat-
tended.
• Attention! Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
• Keep the unit away from children.
• Do not allow children to use the unit as
a toy.
• This unit is not intended for usage by
children or disabled persons unless they
are given appropriate and understandable
instructions by a person who is respon-
sible for their safety on safety measures
and information about dangers that can
be caused by improper usage of the unit.
• Use only new batteries specified in the
instruction. Do not use a new and an old
battery or batteries of different brands at
the same time.
• Long remote sensor operation under low
or high temperatures can reduce voltage
of its batteries that causes decreasing of
transmission range.
• Do not dismantle the unit by yourself, con-
tact the nearest authorized service center
if any damage is detected.
DESCRIPTION
Main unit (Pic. 1)
1. Display
2. Display illumination and alarm repeat but-
ton LIGHT/SNOOZE
3. AL1, AL2 alarm time indication / display
sectors switching, setting confirmation
button MODE.
4. Alarm time indication, alarm on/off button
ALARM
5. Pressure unit selection / value setting
button
6. Temperature unit selection (°С/°F) / value
setting button
7. Button for indication of maximal/minimal
temperature and humidity values regis-
tered by main unit and remote sensor
MEMORY
8. RESET button
9. Battery compartment lid
10. Adapter jack (DC 4,5 V)
11. Stand
Remote sensor (Рic. 2)
12. Wall mounting hole
13. Battery compartment
14. Outdoor wired sensor socket
15. Outdoor wired sensor
Before the first use
Unpack the unit and remove packing materi-
als. Check the unit for damages. In case of
damages do not switch the weather station on.
Note:
If the unit has been exposed to negative
temperatures, keep it under room tem-
perature for 30 minutes before its first
switching on.
VT-6407_IM_18x14.indd 3 15.05.2013 14:19:35

Produktspezifikationen

Marke: Vitek
Kategorie: Weerstation
Modell: VT-6407 W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vitek VT-6407 W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Weerstation Vitek

Bedienungsanleitung Weerstation

Neueste Bedienungsanleitung für -Kategorien-