Viking K-1900-7-EWP Bedienungsanleitung

Viking Gegensprechanlage K-1900-7-EWP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Viking K-1900-7-EWP (8 Seiten) in der Kategorie Gegensprechanlage. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Applications

The K-1900-7 Series panel phones will auto-dial a 1-32 digit programmable phone number

each time the handset is lifted. The unit will touch tone or pulse dial and will not auto-dial

on incoming calls.

The K-1900-7 Series housing consists of a heavy gauge stainless steel panel, an armored

cable, a heavy duty handset, and an all metal cradle. The K-1900-7 Series phone can be

easily touch tone programmed at the shop or installation site. All programming is stored in

non-volatile memory.

The K-1900-712L and K-1900-712L-EWP feature a 12” long armored cable with an internal

stainless steel lanyard for additional cable strength.

The K-1900-7-EWP and K-1900-712L-EWP share all of the features of the K-1900-7 and

K-1900-712L in addition to Enhanced Weather Protection (EWP) for outdoor installations

where the unit is exposed to precipitation or condensation. EWP products are designed to

meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled

butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim

pots and DIP switches for easy on-site programming. For more info on EWP, see DOD 859.

Note: SR-1 DOD 477 LPR-1 DOD 550 If a ringer is required, use an external unit such as the Viking ( ), or ( ).

Vandal Resistant

Hot-Line Panel Phones

Features

Specifications

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA K-1900-7 Series

Hot-Line Panel Phone

June 6, 2022

SECURITY & COMMUNICATION

VIKING

• Vandal Resistant Features: 12 gauge (0.105” thick) 316 stainless steel panel

with permanent laser etched graphics, armored cable, metal cradle and hex

drive mounting screws

• Marine grade 316 stainless steel faceplate and Weather Resistant Features:

screws

• Auto dials one programmable speed dial number (up to 32 digits)

• Touch tone or pulse dialing

• Non-volatile memory (no batteries required)

• Operates on analog PABX and key system extensions or Centrex and CO lines

• Programmable 6 digit security code

• Touch tone programmable

• Optional Enhanced Weather Protection (EWP) available - EWP products are

designed to meet IP66 Ingress Protection Rating, see DOD 859

• 12” armored handset cord on andK-1900-712L K-1900-712L-EWP

• 36” armored handset cord on K-1900-7

• 54” armored handset cord on K-1900-7-EWP

• Programmable pre-dial pause

• Blocks fraudulent calls from hand held pocket dialers

• Hearing aid compatible amplified handset with sealed push button volume

control

• Programmable default volume level

• Programmable volume control disable

• Flush mount using a standard double-gang box (not included)

• Surface mount using an optional surface mount box (not included, see VE-5x10

DOD 424)

Power: Telephone line powered (20V DC/18mA minimum)

Dimensions for Standard Model:

Phone: 5.0” x 10.0” x 5.1” (127mm x 254mm x 130mm)

With rough-in box: 5.0” x 10.0” x 5.2” (127mm x 254mm x 132mm)

Dimensions for EWP Model:

Phone: 5.0” x 10.0” x 5.18” (127mm x 254mm x 132mm)

With rough-in box: 5.0” x 10.0” x 5.28” (127mm x 254mm x 134mm)

Shipping Weight: 4 lbs (1.8 kg )

Operating Temperature: -30°F to 140°F (-34°C to 60°C)

Humidity - Standard Model: 5% to 95% non-condensing

Humidity - EWP Model : Up to 100% condensing

K-1900-712L(EWP) Handset Cable Length: 12” to 12.7” (31 cm to 33 cm)

K-1900-7 Handset Cable Length: 34” to 37” (86 cm to 94 cm)

K-1900-7-EWP Handset Cable Length: 52” to 57” (132 cm to 145 cm)

Touch Tone Dial Speed: Normal = 120ms on/off, Fast = 50ms on/off

Pulse Dial Speed: Normal = 10 pps, Fast = 20 pps

Connections: (2) gel-filled butt connectors

K-1900-7-EWP

with 54”

armored cable

K-1900-712L or

K-1900-712L-EWP

with 12” armored

cable and lanyard

K-1900-7

with 36”

armored cable

• Catalog sales

• Kiosks

• Courtesy phones

• Automated tellers (ATM’s)

• Customer service phones

• Hot-line reservation phones

• Security and emergency phones

• Replaces leased ringdown circuits

• Gate/entrance communication in noisy

areas (diesel trucks, factory noise, etc.)

Features Overview

FRONT VIEW of the

K-1900-7 Series Panel Phone

Condensation Drain Hole

Mounting Screws:

(8) 6-32 x 3/4” marine grade

316 stainless steel, flat head,

hexdrive screws (included).

Laser Etched Graphics:

For long lasting easy to

read graphics.

Faceplate Material:

12 gauge 316 stainless steel

with a #4 brushed finish.

Metal Heavy Duty Vandal

Resistant Hookswitch

VIKING

Handset:

Hearing aid compatible

amplified handset with

sealed push button

volume control

Stainless Steel

Armored Cable:

36” on K-1900-7

54” on K-1900-7-EWP

12” on K-1900-712L

12” on K-1900-712L-EWP

Installation and Mounting

C.O. Line

or Analog

PABX/KSU

Station

SIDE VIEW

of the K-1900-7

(8) #6-32 x 3/4" Stainless

Steel Hexdrive

Screws (included)

10.0"

9.5"

4.50"

5.00"

3.28"

1.30"

FRONT VIEW

of the K-1900-7

1.8"

"Old Work"

Double Gang Bo

(not included)

Viking’s optional Surface Mount Boxes

(VE-5x10 shown right) are designed to be

surface mounted to a single gang box,

double gang box, or any Viking Gooseneck

Pedestal (VE-GNP shown left). For more

information on Viking Surface Mount Boxes

or Gooseneck Pedestals, see DOD 424.

Optional Surface Mount Box,

model shownVE-5x10

(not included) other models

also available

10.14"

3.69"

5.22"

2.75"

Tall Min.

2.10"

Deep

Min.

3.50"

Wide

Min.

Red

Green

K-1900-7-EWP shown with

VE-5x10 Surface Mount

Box and VE-GNP

Gooseneck Pedestal

(not included)

To install the panel phone, attach the panel to an existing double gang box (with minimum dimensions shown K-1900-7

below) using the provided screws or use the optional weather resistant surface mount box. VE-5x10

Note: Four extra screws and nuts are provided to fill the unused mounting holes. The optional VE-5x10 surface mount box

(shown below right) is designed to be surface mounted to a wall, post, single gang box or a or goose VE-GNP VE-GNP-2

neck pedestal (shown below left). The can also be mounted in an optional K-1900-7 VE-9x20 Weatherproof Enclosure

( ). DOD# 413

Note: K-1900-7-EWP VE-9x20 When mounting a in a , the length of the handset cable must be reduced. Use a 3/32” hex

key or bit to loosen the set screw in the brass handset cable retainer. Pull approximately 18 inches of the cable through the

panel and retighten the set screw.

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges. It is recommended

that a surge protector be installed to protect against such surges.

* Note: The gel-filled (water-tight) butt connectors are designed for

insulating displacement on 19-26 gauge wire with a maximum insulation

of 0.082 inches. Cut off stripped wire ends before terminating.

Produktspezifikationen

Marke:	Viking
Kategorie:	Gegensprechanlage
Modell:	K-1900-7-EWP
Breite:	127 mm
Tiefe:	254 mm
Produktfarbe:	Black, Stainless steel
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	132 mm
Platzierung:	Wand
Betriebstemperatur:	-34 - 60 °C
Paketgewicht:	1800 g
Zertifizierung:	EWP\nIP66\nFCC Part 68\nFCC Part 15
Kabellänge:	1.3 m
Gehäusematerial:	Edelstahl
Anzahl der Lautsprecher:	1
Einfache Installation:	Ja