Viking E-60-SS-IP Bedienungsanleitung

Viking Gegensprechanlage E-60-SS-IP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Viking E-60-SS-IP (23 Seiten) in der Kategorie Gegensprechanlage. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/23

Features Applications

Specifications

www.VikingElectronics.com

Information: 715-386-8861

VoIP Entry Phones in 4 Attractive Finishes that

Mount in Standard Double Gang Electrical Boxes

• Compact: Front panel is the size of a typical double gang mid-size wall plate

• Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.65” wide x

2.84” tall minimum) or surface mounts in an optional (see ) for VE-5x5 DOD 424

mounting to a wall, post or Gooseneck Pedestal (EWP recommended) VE-GNP

• Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze,

Textured Black and Satin White

• PNL-60 faceplates: Replacement faceplates with matching screws available in all four

standard finishes

• Self diagnostic reports via email (testing com, microphone, speaker, and switch)

• Automatic polling and programming software included

• 2 Amp relay contacts for door / gate or strobe light control SL-2

• Blue LED indicator

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• PoE powered (class 1, <4 Watts)

• Automatic Noise Canceling (ANC) for proper operation in noisy environments

• VoIP eliminates the need for “Push to Talk” mode

• Network downloadable firmware

• Can be used with optional Secure Relay Controller ( ) RC-4A DOD 582

• Handsfree operation

• 304 stainless steel prevents corrosion on the stainless steel models

• Programmable to dial up to 5 numbers on busy or ring no answer

• Cycles through backup phone numbers on busy or no-answer

• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet

IP66 Ingress Protection Rating, see DOD 859

• Hangs up on busy signal, time-out or touch tone command

• Remotely programmable

• Extended temperature range (-40°F to 140°F)

• Volume adjustments for microphone and speaker

• Optional Polling System available ( ) PB-100 DOD 232

• Optional or strobe light kit available ( and )SL-2 BLK-4-EWP DOD 242 653

Power: PoE class 1 (<4 Watts)

Maximum Sound Pressure: 89 dB SPL @ 1 m

Dimensions: Faceplate: 123.8 mm x 125.4 mm x 4.3 mm (4.875” x 4.938”

x 0.17”), Phone: 72 mm x 46 mm x 42 mm (2.84” x 1.8” x 1.65”)

Shipping Weight: 0.55 kg (1.2 lbs)

Operating Temperature: -40°C to 60°C (-40°F to 140°F)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Audio Codecs: G711u, G711a, G722

Network Compliance: IEEE802.3af PoE, SIP 2.0 RFC3261, 100BASE- TX

with auto cross over

Regulatory Compliance: FCC Part 15, CE, and Canada ICES-3 Class A

Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Installation requires the assistance of a Network Administrator / IT Technician.

The E-60-IP Series are compact, vandal resistant VoIP Entry Phones designed to

provide quick and reliable handsfree communication for SIP VoIP phone systems

with PoE. The Series entry phones can be programmed from any TouchE-60-IP

Tone phone, PC, or remotely using a static IP address. The Entry phones can dial up

to 5 programmable numbers. On-board 2 Amp relay contacts are provided for

activating doorstrikes or gate controllers. An optional Secure Relay ControllerRC-4A

can also be used.

The E-60-IP’s compact size allows it to be mounted in a standard double gang

electrical box. The is available in four different attractive finishes to matchE-60-IP

your door hardware, light fixtures, etc. Replacement faceplates ( ) can beE-60 PNL60

purchased separately and are available in all four standard finishes. The E-60-IP’s

blue LED continually provides light for locating the push button in dark locations,

flashes during dialing and automatically lights again when the call is answered. All

programming parameters, including phone numbers and location numbers, are stored

in non-volatile memory, requiring no batteries. All units are PoE powered.

The E-60-IP-EWP Series IP Series shares all the features of the E-60- in addition to

Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed

to precipitation or condensation. EWP products are designed to meet IP66 standards

and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors,

as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP

switches for easy on-site programming. For more information on EWP, see .DOD 859

• Gate Entrance

• Parking ramps/lots

• ATM machines

• Medical centers

• Lobbies

• Entryways

• Stadiums

• Convention centers

• Public access areas

E-60-SS-IP

“Brushed Stainless Steel”

(similar to Brushed Nickel)

Shown with optional surface VE-5x5

mount box & (not included)VE-LIGHT

E-60-BN-IP

“Oil Rubbed Bronze”

(satin dark brown powder

paint with fine copper metallic)

E-60-WH-IP

“White”

(satin white powder paint)

E-60-BK-IP

“Black”

(fine texture black powder paint)

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA E-60-IP Series

Double Gang Mount

VoIP Entry Phones

September 28, 2021

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Definitions

Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.

DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and

assigns an IP address to allow the client to communicate with other devices on the network.

DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.

Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN

achieve transmission speeds up to 1Gbps.

Host: A computer or device connected to a network.

Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various

forms of network communication.

Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses

to hosts or vice versa.

Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP

IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the

Internet.

IP Address: This is the address that uniquely identifies a host on a network.

LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.

Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of

time, the lease can expire and the address can be assigned to another host.

MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique

address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct

IP address. You can find the MAC address of your E-60-IP phone printed on a white label on the top surface of the PoE LAN port.

Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP

Address, and Subnet Mask. MAC Address

RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission

of multimedia data over either unicast or multicast network services.

Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the

client.

Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions

such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP

which govern establishment, termination and other essential elements of a call.

Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the

Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1

Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices

whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the

same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet

mask.

TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.

TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the

Internet, making it the de facto standard for transmitting data over networks.

TISP: Telephone Internet Service Provider

WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the

Internet.

Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The

AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.

Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to

create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance

is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.

Produktspezifikationen

Marke:	Viking
Kategorie:	Gegensprechanlage
Modell:	E-60-SS-IP
Breite:	125.4 mm
Tiefe:	4.3 mm
Gewicht:	550 g
Produktfarbe:	Edelstahl
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	123.8 mm
Platzierung:	Wand
Betriebstemperatur:	-40 - 60 °C
Netzstandard:	IEEE 802.3af
Zertifizierung:	CE\nCanada ICES\nFCC Part 15\nSIP
Power over Ethernet (PoE):	Ja
Gehäusematerial:	Edelstahl
Geräuschpegel:	89 dB
Abmessungen (BxTxH):	125.4 x 4.3 x 123.8 mm
Knopfanzahl:	1
Menge Außengeräte:	1
Inklusive Außengerät:	Ja
Einfache Installation:	Ja
Verbindungstyp:	RJ-45
Autentifizierungstyp:	Zugangschip/Karte