ViewSonic PJ400 Bedienungsanleitung

ViewSonic Videopprojektor PJ400

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic PJ400 (60 Seiten) in der Kategorie Videopprojektor. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/60

PJ400

LCD Projector

ViewSonic®

Model No. : VS10459

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Руководство пользователя

- 使用手冊

iViewSonic PJ400

Compliance Information

For U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) The device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use grounded power supply cord and the cables

which are included with the equipment or speciﬁed. Also, any unauthorized changes or modiﬁcations

not expressly approved by the party responsible for compliance could void the user’s authority to

operate this device.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For European Countries

CE Conformity

The device complies with the requirements of the EEC directive 89/336/EEC as

amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic

compaty”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

User Information for all Countries

Notice: Use the cables which are included with the unit or speciﬁed.

iiViewSonic PJ400

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water. Warning: To reduce the risk of ﬁre or electric shock, do

not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this

guide for further instructions.

7. Do not block any ventilation openings. Install the equipment in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including ampliﬁers) that produce heat.

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided for your

safety. If the plug does not fit into your outlet, consult an electrician for replacement of the

outlet.

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the

point where if emerges from the equipment. Be sure that the power outlet is located near the

equipment so that it is easily accessible.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the equipment. When a cart is used, use caution when

moving the cart/equipment combination to avoid injury from tipping over.

13.

Unplug this equipment when it will be unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Service is required when the unit has been

damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled

onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not

operate normally or has been dropped.

Produktspezifikationen

Marke:	ViewSonic
Kategorie:	Videopprojektor
Modell:	PJ400
Bildschirmauflösung:	800 x 600 Pixel
Gewicht:	2200 g
Anzahl eingebauter Lautsprecher:	1
Betriebstemperatur:	0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 85 %
Stromverbrauch (Standardbetrieb):	240 W
Kontrastverhältnis:	300:1
Geräuschpegel:	33 dB
Energiebedarf:	100 - 240 VAC / 50 - 60Hz
Digitaler Zoom:	1.2 x
Abmessungen (BxTxH):	285 x 73 x 202 mm
Projektorhelligkeit:	1600 ANSI Lumen
Projektionstechnologie:	LCD
native Auflösung des Projektors:	SVGA (800x600)
Fokus:	Manuell
Seitenverhältnis:	4:3
Audioanschlüsse:	Stereo mini-jack (x1)
Lebensdauer der Lichtquelle:	4000 h
Lampenleistung:	165 W
Typ der Lichtquelle:	Lampe
Vertikaler Scanbereich:	56 - 120 Hz
Horizontaler Scanbereich:	15 - 91 kHz
Weitere Anschlüsse:	RCA jack (x1), 15-pin HD, D-sub
Keystone Korrektur:	+/- 15º
Eingang:	RCA jack
Display-Auflösung:	800 x 600 Pixel