ViewSonic PJ406D Bedienungsanleitung

ViewSonic Videostrahl PJ406D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic PJ406D (38 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 216 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/38

ViewSonic®

PJ 6D40

DLP Projector

- User Guide

- Guide de l'utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell'utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Pyководство польэователя

- 使用手冊

使用手冊

使用手冊使用手冊

- 使用手冊

使用手冊

使用手冊使用手冊

iViewSonic

PJ 6D40

Compliance Information

For U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) The device may not cause harmful interference, and (2) this device must accept any

interference received, including interferencee that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use grounded power supply cord and the cables

which are included with the equipment or specified. Also, any unauthorized changes or modifications

not expressly approved by the party responsible for compliance could void the user's authority to

operate this device.

For Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

． This Class B digital apparatus complies with Canadian ICES-003.

． Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For European Countries

CE Conformity

The device complies with the requirements of the EEC directive 89/336/EEC as amended

by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and

73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

User Information for all Countries

Notice: Use the cables which are included with the unit or specified.

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the equipment in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including amplifiers) that produce heat.

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided for your

safety. If the plug does not fit into your outlet, consult an electrician for replacement of the

outlet.

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the point

where if emerges from the equipment. Be sure that the power outlet is located near the

equipment so that it is easily accessible.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the equipment. When a cart is used, use caution when moving the cart/equipment combination

to avoid injury from tipping over.

13. Unplug this equipment when it will be unused for long periods of time.

14. Refer all servicing to qualified service personnel. Service is required when the unit has been

damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled

onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not

operate normally or has been dropped.

iiViewSonic

PJ 6D40

Produktspezifikationen

Marke:	ViewSonic
Kategorie:	Videostrahl
Modell:	PJ406D
Bildschirmauflösung:	1280 x 1024 Pixel
Bildschirmdiagonale:	34.67 Zoll
Marktpositionierung:	Tragbar
Gewicht:	2050 g
Anzahl eingebauter Lautsprecher:	1
Betriebstemperatur:	5 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 85 %
Stromverbrauch (Standardbetrieb):	250 W
Kontrastverhältnis:	2000:1
Geräuschpegel:	37 dB
Energiebedarf:	AC 100 - 240 V, 50 - 60Hz
Lampentyp:	UHP
Digitaler Zoom:	1.1 x
Abmessungen (BxTxH):	237.5 x 210.5 x 96.5 mm
Projektorhelligkeit:	1900 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	SVGA (800x600)
Fokus:	Manuell
Seitenverhältnis:	4:3
Audioanschlüsse:	3.5mm stereo mini jack
Lebensdauer der Lichtquelle:	3000 h
Lampenleistung:	200 W
Typ der Lichtquelle:	Lampe
Vertikaler Scanbereich:	56 - 85 Hz
Horizontaler Scanbereich:	31.5 - 80 kHz
Weitere Anschlüsse:	15-pin mini D-sub
Objektiv-System:	F = 2.7 - 3.0 / f = 21.83 - 23.81
Keystone Korrektur:	±15°
Eingang:	RCA jack
Display-Auflösung:	1280 x 1024 Pixel