ViewSonic PJD5126 Bedienungsanleitung

ViewSonic Videostrahl PJD5126

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic PJD5126 (88 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/88

PJD5126/PJD6223/PJD6253/

PJD6553w

DLP Projector

User Guide

Model No. VS14295/VS14191/VS14193/VS14195

IMPORTANT: Please read this User Guide to obtain important information on installing

and using your product in a safe manner, as well as registering your product for future

service. Warranty information contained in this User Guide will describe your limited

coverage from ViewSonic Corporation, which is also found on our web site at http://www.

viewsonic.com in English, or in specic languages using the Regional selection box in

the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente

las instrucciones en este manual”

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or

discarded batteries or accumulators as unsorted municipal waste, but use the return and

collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of

more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided

for your safety. If the provided plug does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs.

Convenience receptacles and the point where they exit from the unit. Be sure that the

power outlet is located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit

has been damaged in any way, such as: if the power-supply cord or plug is damaged,

if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or

moisture, or if the unit does not operate normally or has been dropped.

Produktspezifikationen

Marke:	ViewSonic
Kategorie:	Videostrahl
Modell:	PJD5126
Marktpositionierung:	Präsentation
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Breite:	294 mm
Tiefe:	242 mm
Gewicht:	2600 g
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	84 mm
Energiequelle:	AC
RMS-Leistung:	2 W
Anzahl eingebauter Lautsprecher:	1
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Nein
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	380 mm
Verpackungstiefe:	192 mm
Verpackungshöhe:	345 mm
Paketgewicht:	4100 g
Fernbedienung enthalten:	Nein
Eingebauter Ethernet-Anschluss:	Nein
Schnellstartübersicht:	Ja
Zertifizierung:	CB, UL, cUL, FCC (including ICES-003), CE, UL-Argentina, NOM, GS, GOST-R, SASO, Ukraine, PSB, C-Tick, Korean-KC, CCC, CECP, WEEE
Stromverbrauch (Standardbetrieb):	243 W
Natives Seitenverhältnis:	16:9
Stromverbrauch (Standby):	1 W
Temperaturbereich bei Lagerung:	0 - 40 °C
Geräuschpegel:	32 dB
Kontrastverhältnis (dynamisch):	15000:1
Analoges Signalformatsystem:	NTSC, SECAM
RS-232 port:	1
Composite Video-Eingang:	1
Komponenteneingang Video (YPbPr/YCbCr):	2
HDCP:	Nein
Unterstützte Video-Modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
DVI Anschluss:	Nein
Full-HD:	Ja
Zoom-Fähigkeit:	Ja
Kabelsperre-Slot:	Ja
Slot-Typ Kabelsperre:	Kensington
Integrierter Kartenleser:	Nein
Projektorhelligkeit:	2700 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	SVGA (800x600)
Projektionsflächenkapazität:	30 - 300 Zoll
Projektionsabstand:	1.2 - 10 m
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	3
Serielle Schnittstelle:	RS-232
Nachhaltigkeitszertifikate:	RoHS, ENERGY STAR
Audioanschlüsse:	1
Lebensdauer der Lichtquelle:	5000 h
Lampenleistung:	180 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	- mm
Anzahl S-Video-Eingänge:	1
Höhe bei Betrieb:	1800 - 3048 m
Unterstützte Seitenverhältnisse:	4:3, 16:9
Vertikaler Scanbereich:	50 - 120 Hz
Horizontaler Scanbereich:	31 - 100 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus):	6000 h
Stromeingang:	Ja
Geräuschpegel (Energiesparmodus):	29 dB
Projektionsverhältnis:	1.86 - 2.04:1
Audioausgang:	1
Zoomtyp:	Manuell