Victron BlueSolar MPPT 150 35 Bedienungsanleitung

Victron Sonnenkollektoren BlueSolar MPPT 150 35

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Victron BlueSolar MPPT 150 35 (85 Seiten) in der Kategorie Sonnenkollektoren. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/85
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Användarhandbok
SE
Appendix
BlueSolar charge controller MPPT 150/35
1
EN NL FR DE ES SE Appendix
1. General Description
1.1 Charge current up to 35A and PV voltage up to 150V
The BlueSolar MPPT 150/35 charge controller is able to charge
a lower nominal-voltage battery from a higher nominal voltage
PV array.
The controller will automatically adjust to a 12V, 24V or a 48V
nominal battery voltage.
1.2 Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is
changing continuously, an ultra fast MPPT controller will
improve energy harvest by up to 30% compared to PWM charge
controllers and by up to 10% compared to slower MPPT
controllers.
1.3 Advanced Maximum Power Point Detection in case of
partial shading conditions
If partial shading occurs, two or more maximum power points
may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not
be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy
harvest by locking to the optimum MPP.
1.4 Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. Full output
current up to 40°C (104°F).
1.5 Extensive electronic protection
Over-temperature protection and power derating when
temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
1.6 Internal temperature sensor
Compensates absorption and float charge voltages for
temperature.
1.7 Automatic battery voltage recognition
The MPPT 150/35 will automatically adjust itself to a 12V, 24V or
a 48V system one time only. If a different system voltage is
required at a later stage, it must be changed manually, for
example with the Bluetooth app, see section 1.11.
.


Produktspezifikationen

Marke: Victron
Kategorie: Sonnenkollektoren
Modell: BlueSolar MPPT 150 35

Brauchst du Hilfe?

Wenn Sie Hilfe mit Victron BlueSolar MPPT 150 35 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten