Veloretti V1 Bedienungsanleitung

Veloretti Fahrrad V1

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Veloretti V1 (2 Seiten) in der Kategorie Fahrrad. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Assembly Manual
Thank you and congratulations on your purchase of an original Veloretti. The following guide is to
assist with the setting up your bike. Please read this document carefully.
IN THE
IN THE
IN THE
IN THEIN THE BOX:
BOX:
BOX:
BOX: BOX:
The bike has been carefully wrapped to ensure there will be no damage in transit. Start by
removing all cardboard, foam and cable ties and laying out all loose parts clearly.
The bicycle is already 85% assembled. All you need to do is complete a few simple assembly
steps. In just 10 minutes you can cycle through your city streets.
IMPO
IMPO
IMPO
IMP OIMP O RTAN
RTAN
RTAN
RTANRTAN T:
T:
T:
T: T:
This manual contains important safety, performance and service information. Read it before you
take the first ride on your Veloretti, and keep it for reference. If you have any questions or do not
understand something, take responsibility for your safety and consult us at:
Tel: +31 20 7710282(0) -
Mail: info@veloretti.com!
Skype: veloretti
ASSEM
ASSEM
ASSEM
ASSEMASSEMBLY CHECKLIST:
BLY CHECKLIST:
BLY CHECKLIST:
BLY CHECKLIST: BLY CHECKLIST:
1 Front wheel & Fender
2 Handlebar
3 Pedals
4 Seat & Seat post
5 Reflector set
TOOLS:
TOOLS:
TOOLS:
TOOLS:TOOLS:
• Wrench set
• Allen key
• Scissor
If you need more information please see the assembly steps or video at:
http://veloretti.com/assembly/ If something is still not clear please call or email our customer
service. We are always there to help.
LET’S START:
LET’S START:
LET’S START:
LET’S START:LET’S START:
Step 1
Step 1
Step 1
Step 1Step 1
Take your new Veloretti out of the cardboard box and remove the protective cardboard carefully.
Cut the zip ties that hold the parts together.
Step 2
Step 2
Step 2
Step 2Step 2
Install the front fender on to the fork and use the chrome bottom brackets to get the fender in
line with the wheel that will be installed next. Put the front wheel into the front fork, align the
wheel proper and tighten the bolts.
Step 3
Step 3
Step 3
Step 3Step 3
Place the handlebar stem in the steer tube of the fork. Align the stem so that it is straight with
the front wheel and use an Allen key Additionally the handlebar to tighten it in the right position.
needs to be tightened into the right position with an Allen key. Never ride a bicycle with a loose
stem, handlebar or wheel as this may cause accidents. Please double check if the bolts are
tightened 100% securely.
Step 4
Step 4
Step 4
Step 4Step 4
Install the pedals by beginning to thread he right pedal into the right crank arm and turn the
pedal axle clockwise (this pedal is marked with an “R” on the axle). Once both left and right
pedal threads are engaged, use the no.15 wrench for final tightening.
Step 5
Step 5
Step 5
Step 5Step 5
Finally the seat post needs to be adjusted. A good starting point is to raise the saddle to about
hip- height and try if it is comfortable to you. When you have found the perfect position please
tighten it securely with an Allen key Please extra tighten the bolt under the saddle, as this . could
get loose after intensive use.
Step 6
Step 6
Step 6
Step 6Step 6
Almost there! Pump up your tires to the amount of pressure that you like best. A small nut must
inside the valve needs to be unscrewed to permit airflow. After the tire is inflated please tighten
the small nut again. We recommend putting enough air in your tires, as this will improve your ride
enormously.
Step 7
Step 7
Step 7
Step 7 Step 7
Double check if all the bolts are tight securely and if all components are undamaged. Finally,
please install the reflectors set in order meet the . supplied safety regulations
Step 7
Step 7
Step 7
Step 7Step 7
Congratulations you have made it! You are now ready to conquer the city streets.
If you like to share your first bike experience with us please use your
own
Instag
Instag
Instag
Insta gInsta g ram
ram
ram
ramram and tag
us with #velor
#velor
#velor
#velor#veloretti
etti
etti
ettietti We love to see you together with your new bike! Your picture will appear on
our website automatically.
Happy cycling! !
!

Produktspezifikationen

Marke: Veloretti
Kategorie: Fahrrad
Modell: V1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Veloretti V1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fahrrad Veloretti

Veloretti

Veloretti V1 Bedienungsanleitung

2 Oktober 2024
Veloretti

Veloretti Maxi Bedienungsanleitung

13 August 2024
Veloretti

Veloretti V4 Bedienungsanleitung

28 Februar 2024

Bedienungsanleitung Fahrrad

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Kindercraft

Kindercraft TOVE Bedienungsanleitung

16 Oktober 2024
Giant

Giant Talon 27.5 Bedienungsanleitung

11 Oktober 2024
Redline

Redline Conquest Expert Bedienungsanleitung

7 Oktober 2024
Honda

Honda CBR600RR (2014) Bedienungsanleitung

6 Oktober 2024
Qwic

Qwic Tour Bedienungsanleitung

5 Oktober 2024
Suzuki

Suzuki TU250X Bedienungsanleitung

2 Oktober 2024
Kindercraft

Kindercraft EASYTWIST Bedienungsanleitung

25 September 2024
Batavus

Batavus Click Bedienungsanleitung

19 September 2024
Gazelle

Gazelle CityZen S27 Bedienungsanleitung

19 September 2024
Batavus

Batavus X-posure Bedienungsanleitung

16 September 2024