Veho VCC-A001-ESP Bedienungsanleitung

Veho niet gecategoriseerd VCC-A001-ESP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Veho VCC-A001-ESP (1 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
Muvi Extreme Sports Pack – Accessories Guide
Contents
1 x muvi additional spring mounting clip
1 x mounting bracket for bike/helmet
1 x magnetic mounting bracket for wall
1 x muvi silicon protective sleeve
1 x muvi arm strap
1 x muvi head/helmet strap
1 x mounting bracket Velcro
2 x mounting bracket screws
3 x mounting bracket straps
Fastening to a bike
1. Clip the muvi into the bike mounting clip.
2. Using the Velcro straps, thread the thinnest end of one of
the straps through the bike mount and wrap securely around
where you wish to mount the muvi (handle bar, fork, seat post,
etc)
3. Thread the second Velcro strap into the mounting clip and
secure tightly in the same way.
4. If you want to make it extra secure you can use the 3rd
Velcro strap in a figure of 8 around the handle bar and
mounting bracket for extra security.
Fastening to a helmet
1. Clip the muvi into the helmet mounting clip.
2. Thread the head/helmet strap through the mounting clip.
3. Thread the elastic through the plastic buckle, place around the helmet
and secure by pulling the strap until it is tight.
Using the arm strap
1. Clip the muvi to the spring mounting clip.
2. Clip the mounting clip to the small flap (near the plastic buckle) and then secure the flap to the Velcro.
3. Thread the end of the arm strap through the plastic buckle, fold it back on itself, tighten and secure to the
Velcro.
Using the magnetic mounting bracket
There are three options for using the bracket:
1. Attach the bracket to any metal object, such as a radiator, as it is magnetic
2. Screw the mounting bracket to a wall, door, shelf etc.
3. Apply one of the mounting brackets Velcro strips to the back of the bracket
and either attach to clothing/material or stick the other strip to any flat surface
and attach the two together.
To attach the muvi to the wall bracket, clip the muvi into the spring mounting
clip, and attach the spring mounting clip to the bracket, lining up the grips of
both pieces to keep the muvi secure.
Using the silicon protective sleeve
Gently insert the muvi into the large hole at the top of the silicon sleeve, ensuring that the muvi enters with
the USB port going in first. You will need to gently stretch the silicon and push the muvi inside the sleeve.
Please note that once the muvi is inside the silicon sleeve that you will not be able to mount it in the spring
mounting clip or the mounting bracket for the helmet/bike. You can thread one of the Velcro strips through
the back of the sleeve and use these to attach the muvi where you want it.

Produktspezifikationen

Marke: Veho
Kategorie: niet gecategoriseerd
Modell: VCC-A001-ESP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Veho VCC-A001-ESP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Veho

Veho

Veho VCC-A001-ESP Bedienungsanleitung

2 August 2024
Veho

Veho VMS-001 200x Bedienungsanleitung

17 Juli 2024
Veho

Veho Pebble Mini Bedienungsanleitung

14 Juli 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024