UPM EM338 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für UPM EM338 (16 Seiten) in der Kategorie Energiekostensenker. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
EM338
electronic energy meter
NE ’ OW R S
AM NUAL
FEATUR SE
Monitors and totals
energy use.
Maximum amperage
and wattage readings
Energy cost calculation
Energy usage time
Overload warning (Amps or Watts)
EM338 is an energy meter that
allows you to measure the
amount of electricity used by
An appliance. Ideal for use with
large appliances like
refrigerators, air conditioners
and office machines. It enables
you to enter the electricity price
per Kilowatt Hour (KWh) to
calculate the total cost of an
appliance's power consumption,
and to monitor the electricity
usage. It also detects energy
overloads and records the
maximum amperage and
wattage.
1
LCD
DISPLAY
OVERLOAD
SOCKET
PRICE
$
(UP)
(DOWN)
TABLE OF CONTENTS
Batteries......................................................................................................3
LCD Display and Buttons ...........................................................................4
Clock Setting ..............................................................................................5
Energy monitor...........................................................................................6
Overload .....................................................................................................7
Set Overload...............................................................................................8
Energy usage and cost ..............................................................................9
Total Energy Consumed (KWh)..................................................................10
Total Usage (on time) .................................................................................11
Set the energy price / KWh ........................................................................12
Total Energy Cost ($)..................................................................................13
Troubleshooting .........................................................................................14
Technical Specifications .............................................................................15
Warranty .....................................................................................................16
2
BATTERIES
Your new energy meter comes with two button cell batteries already installed.
To begin operation, you must first remove the ribbon from the battery
compartment located at the back of the unit.
1Carefully pull out the ribbon from
the battery compartment; this will
activate the batteries. Make sure
the batteries are inserted properly.
Ensure the two button cell batteries
are properly in place, then replace the
battery cover. (Be careful not to bend
any of the metal contacts)
To replace batteries that are
worn out, remove the battery cover.
Replace batteries as required to ensure the proper operation of this unit.
The batteries serve as a memory backup for the readouts and settings.
If the energy meter is not in use for an extended period of time it is
recommended to remove the batteries from the unit.
3
1


Produktspezifikationen

Marke: UPM
Kategorie: Energiekostensenker
Modell: EM338

Brauchst du Hilfe?

Wenn Sie Hilfe mit UPM EM338 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten