Universal Remote Control ZR-2 Bedienungsanleitung

Universal Remote Control WLAN-Repeater ZR-2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Universal Remote Control ZR-2 (2 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

The information in this manual is copyright protected. No part of this

manual may be copied or reproduced in any form without prior written

consent from Universal Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR

OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS

MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior

notice.

URC - Control the Experience is a registered trademark of Universal

Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks

of their respective companies or organizations.

ZR-2 REPEATER

Page 1

Introduction

Thank you for purchasing the ZR-2 Repeater. The ZR-2 is used to extend

the operational range between Total Control products that work on Total

Control's 2.4 GHz RF network (i.e. TRC-780 to the MRX Advanced System

Controller). Once joined to an MRX, it wirelessly repeats communication

between a Total Control remote and an MRX Advanced System Controller.

Features and Benefits

lWirelessly extend the range between Total Control RF products.

lAdditional ZR-2 Repeaters can be joined to extend the RF signal to every

corner of the home, or small office.

lCompact size allows for easy installation

lSeamless integration with the Total Control System

Parts Guide

The ZR-2 Repeater includes:

1 - ZR-2 Repeater

1 - Owner's Manual

ZR-2 Front and Rear Panel Descriptions

The front and rear panel consists of:

Power LED: When illuminated this light indicates the ZR-2 is powered.

Status LED: The LED shows the RF signal strength between the ZR-2 and

the MRX Advanced System Controller. Pressing the Test button on the

Front of the unit refreshes the signal strength.

When the LED is:

lOFF: There is no signal to communicate between Total Control

products. Press the Test button to reconnect to the MRX Advanced

System Controller.

lOrange: Poor signal strength. URC recommends relocating the unit for

strong signal reception.

lGreen: Receiving optimal signal strength.

Data LED: The Data LED flashes as the ZR-2 Repeater transmits data.

Test: Press to obtain the current signal strength status between the ZR-2 and

the MRX Advanced System Controller.

USB: INSTALLER ONLY!! Used for updating the unit's firmware.

ZR-2 REPEATER

Page 2

POWER LED

STATUS LED

USB

TEST

DATA LED

Specifications

RF Frequency: 2405 ~ 2480 MHz(Two-way RF)

Effective Range: Typically 50-75 ft, depending on environment

Size: L x D x H = 2.559" x 0.984" x 1.968"

Weight: 2 oz.

Power Supply: 100 ~ 240V~, 50/60Hz, 0.3A

LimitedWarranty Statement

1. Limited Warranty and Disclaimers

Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material

and workmanship under normal usage for two (2) year from purchase when such is purchased from URC. This

limited warranty is valid only in the United States of America. URC warrants that the software will substantially

conform in any material respect to its functional speciﬁcations at the time of delivery. URC SHALL NOT BE

LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE

URC DOCUMENTATION. URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR

ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.

URC warrants that at the time of purchase the URC equipment and the URC software complied with all

applicable regulations and policies of the Federal Communications Commissions (“FCC”) regarding

electromagnetic interference caused by electronic/computing devices and to the extent that the URC equipment

and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to

promptly cause such to comply.

URC equipment purchases from other than an authorized URC dealer or distributor are without warranty.

THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR

SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND

DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY WARRANTY, EXPRESS, STATUTORY

OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC

EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT

LIMITED TO THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

URC DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE

OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN TERMS

OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR

ZR-2 REPEATER

Page 3

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914)835-4484 FAX: (914) 835-4532

www.universalremote.com

OCE-0133A Rev 01

HEREIN, TECHNICAL SERVICES ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,

STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT

NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME

OR RESULTS.WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN,

WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II)

MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY

PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.

The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are

restricted or excluded by applicable law and such shall apply to the maximum extent permitted by applicable

law.

In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or

comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment. In the event of a

defect, these are the end user’s exclusive remedies.

All the URC equipment returned for service, exchange or repair require an RGA number. To obtain an RGA

number, you must complete a Return Request Form which you may obtain by calling (914) 835-4484 or

contacting URC at returnrequest@universalremote.com. To obtain warranty service, end user must deliver the

URC equipment, freight prepaid, in its original packaging or packaging affording adequate protection to URC at

420 Columbus Avenue, Valhalla, NY 10595. It is end user’s responsibility to backup any macro programming,

artwork, software or other materials that may have been programmed into the unit. It is likely that such data,

software, or other materials will be lost during service and URC will not be responsible for any such damage or

loss. A dated purchase receipt, bill of sale, installation contract or other veriﬁable proof of purchase is required.

For the URC equipment support and other important information, please visit URC's website available at

www.universalremote.com or call the Customer Service Center at (914) 835-4484.

This limited warranty only covers the URC equipment issues caused by defects in material or workmanship

during ordinary consumer use. It does not cover product issues caused by any other reason, including but not

limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of

technology, or modiﬁcation of or to any part of the URC equipment. This limited warranty does not cover the

URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as batteries). This

limited warranty is invalid if the factory applied serial number has been altered or removed from the URC

equipment. This limited warranty speciﬁcally excludes the URC equipment sold by unauthorized resellers.

With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s PC programmable remotes

or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC

programmable remotes or any of our Total Control® whole-house equipment online means buying equipment

that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software

support, either.

2. URC’S Limitations of Liability

IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR

ZR-2 REPEATER

Page 5

CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN

IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR

COMPUTER PROGRAMS.URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE

LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY END USER FOR THE URC

EQUIPMENT.

IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL, INCLUDING ANY

INSTANCE OF FORCE MAJEURE. IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF

END USER OR ANY THIRD PARTY.

THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR IN PART, WHERE SUCH

ARE RESTRICTED LIMITED OR EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE

MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.

URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS.

SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS LIMITED

WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.

End User Agreement

The terms and conditions of the End User Agreement available at www.universalremote.com/eua.php shall

apply.

ZR-2 REPEATER

Page 6

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one more of the following measures:

uReorient or relocate the receiving antenna.

uIncrease the separation between the equipment and receiver.

uConnect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

uConsult the dealer or an experienced radio/TV technician for help.

ZR-2 REPEATER

Page 7

Warning!

Changes or modifications not expressly approved by the manufacturer

could void the user's authority to operate the equipment.

Note : The manufacturer is not responsible for any Radio or TV interference

caused by unauthorized modifications to this equipment. Such

modifications could void the user's authority to operate the equipment.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the authority to operate equipment.

The antenna(s) used for this transmitter must not be co-located or operating

in conjunction with any other antenna or transmitter.

Federal Communication Commission (FCC) Radiation Exposure

Statement

This remote device is approved as a hand-held and hand-operated only

portable (relative to hand) device which is normally operated at 20 cm

from a person's body.

ZR-2 REPEATER

Page 8

ZR-2 Repeater

Owner's Manual

Produktspezifikationen

Marke:	Universal Remote Control
Kategorie:	WLAN-Repeater
Modell:	ZR-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Universal Remote Control ZR-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung WLAN-Repeater Universal Remote Control

Universal Remote Control ZR-2 Bedienungsanleitung

1 September 2024

Bedienungsanleitung WLAN-Repeater

Neueste Bedienungsanleitung für -Kategorien-

Planet WNAP-1110 Bedienungsanleitung

10 Oktober 2024

Netgear A7000 Bedienungsanleitung

3 Oktober 2024

Planet LRP-104CET Bedienungsanleitung

30 September 2024

Netgear WN2500RP Bedienungsanleitung

30 September 2024

Totolink EX200U Bedienungsanleitung

29 September 2024

SilverCrest SWV 300 B2 Bedienungsanleitung

29 September 2024

Xiaomi RA75 Bedienungsanleitung

28 September 2024

Totolink EX300 Bedienungsanleitung

28 September 2024

Sitecom WLX-2001 Bedienungsanleitung

23 September 2024

Ubiquiti Networks PrismStation AC PS-5AC Bedienungsanleitung

20 September 2024