Tzumi On Air Bedienungsanleitung

Tzumi Nicht kategorisiert On Air

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Tzumi On Air (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
On Air
Battery-Powered
Lavalier Microphone
INTRODUCTION & FEATURES PRODUCT OVERVIEW & FUNCTIONS
Please read this user manual in its entirety before using your new On Air
Battery-Powered Lavalier Microphone.
Enhance your podcast, interview, or any other broadcasting
and audio project with the On Air Battery-Powered Lavalier
Microphone. Designed for discretion and compatibility with
a wide range of gear, including digital cameras, smartphones,
tablets, and other recording devices, this tiny omnidirectional
microphone uses simple plug-and-play functionality for easy
use with all ages: just plug the jack securely, start recording
your voice, and control everything from your device. It’s the
fastest and easiest way to bring professional-quality audio to
any home studio.
.
USING YOUR MICROPHONE RECORDING WITH A CAMERA:
RECORDING WITH A SMARTPHONE:
STEP 3: Connect the microphone to a recording device.
A. Plug the 3.5mm connector into the audio input jack located
on your DSLR, Point and Shoot camera, or camcorder.
B. Attach the microphone to your clothing (see Step 2).
C. Locate the switch on the unit’s power module. Position the
switch to the Camera (on) setting. You can now begin filming
and recording audio.
A. Plug the 3.5mm connector into the audio input jack located
on your smartphone or tablet.
B. Attach the microphone to your clothing (see Step 2).
C. Check that the microphone power module switch is set to
the Smartphone (off) setting before connecting the unit to
your smartphone.
D. Turn on your smartphone and record a short audio
segment to ensure the unit is working properly. Do this
by pressing the "Record" button on your audio or video
recording app, then speak or sing to test.
NOTE: If this is your first time using the microphone, start by recording a
short audio segment to ensure the unit is working properly.
STEP 1: Connect all included microphone parts.
• Insert the microphone into the plastic loop on the included clothing clip
to secure (see diagram below for reference).
• Gently slide the foam windscreen over the microphone. We recommend
using the windscreen at all times to avoid excess wind, breathing, and
other noise (even when recording indoors). This will ensure the highest
audio quality regardless of location/environment.
STEP 2: Attach the microphone to your clothing.
• Insert the LR44 battery into the battery compartment and close/tighten
to secure.
• Clip the microphone to the front of your/your subject’s clothing, with
the clip positioned about 6 inches (15-20 cm) from the subject’s face.
• The microphone cable is 6 ft. long and suitable to clip to shirts, ties,
jackets, collars, and more.
TROUBLESHOOTING
PACKAGE CONTENTS:
1 x Lavalier Microphone
1 x Lapel / Clothing Clip
1 x Battery (LR44)
1 x TRS Adapter (6.35mm / 3.5mm)
1 x Foam Windscreen
1 x Carrying Pouch
User Manual
• Compact Lavalier Battery-Operated Clip-On Microphone
• Designed to Clip to Shirts, Ties, Jackets, or Collars Discreetly
• 6 Ft. Cable Can be Affixed Discreetly to Any Outfit
• 3.5mm AUX Connection Compatible with Smartphones
and Tablets
• Easy-to-Use Plug-and-Play Interface
• Highly Sensitive & Ideal for Recording Voices
• Features Camera & Smartphone Settings to Control Specific
Microphone Needs
.
Polar Pattern: Omnidirectional
Transducer: Electret Condenser
Frequency Range: 20 Hz – 16,000 Hz
Sensitivity: -38 dB ± 3 dB
Output Impedance: 100 ≤ Ω
Signal-to-Noise Ratio: 58 dB SPL
Battery Type: LR44 (Included; Also Compatible with 357
and SR44 Batteries)
Connector: 3.5mm (1/8”) 4-pole TRS Connection
Dimensions: 18 x 8.3 x 8.3 mm (0.7 x 0.3 x 0.3 in)
Cable Length: 6 m (20 ft)
Weight: Microphone - 2.4 g (~0.1 oz);
Power Module – 19 g (~0.7 oz)
PRODUCT SPECIFICATIONS
Lapel Clip
3.5mm AUX Connector
TIPS FOR PLACEMENT & USE:
REPLACING THE BATTERY :
The microphone will not record audio.
Make sure that the 3.5 mm connector is
connected to your recording device's
input/AUX jack (see diagram for
reference).
Make sure that the 3.5 mm connector is
fully inserted into the audio jack. If your
smartphone or tablet uses a case, you
may need to remove the case first for the
unit to be fully inserted.
Make sure that your device is recording
audio (and that any app you use is
working properly).
WARNINGS & SAFEGUARDS
• Microphones are very sensitive and prone to damage if
not handled carefully.
• This microphone is designed to work with smartphones and
tablets with TRS-compatible input jacks. Compatibility is
not guaranteed for all devices.
• Avoid prolonged exposure to sunlight, high temperatures,
dusty and humid environments. Such conditions can cause
irreversible damage to the wiring which may affect or prohibit
normal use.
• Do not attempt to pierce, strike, or apply strong pressure
to your On Air Battery-Powered Lavalier Microphone with
sharp or heavy objects. Strong impact or shocks could
cause irreversible damage to the unit.
• Never wrap the wire around your neck or other
body parts.
• Users run the risk of explosion if the battery is replaced
incorrectly. Replace only with the same battery type
(LR44) or specified compatible models.
• This product is not a toy. Never leave with children
unsupervised.
• If the On Air Battery-Powered Lavalier Microphone
malfunctions, do not attempt to repair it yourself. Doing
so will violate the tzumi Warranty and may cause
permanent damage. Instead, contact the Customer
Support team at for assistance. tzumi.com/support
PROBLEM POSSIBLE SOLUTION(S)
PROBLEM POSSIBLE SOLUTION(S)
The microphone will not turn on.
The battery may be positioned incorrectly
inside the battery compartment. Open the
compartment and make sure the battery is
correctly installed and polarity symbols
are aligned.
The battery may have low power. Replace
it with a new battery (see Specifications
section for compatible styles).
The battery terminals may be dirty. Open
the battery compartment and carefully
clean the terminals with a clean
cotton swab.
The battery discharges too quickly.
The microphone has been left on (in
the Camera position). Turn off the
microphone by moving the switch
to the Smartphone (off) position.
You may be using the unit in extremely
hot or cold conditions. Poor operating
conditions like this will drain the
battery quickly.
The unit picks up too much
ambient noise.
Check that the microphone is placed as
close to the subject (speaker) as possible.
(Some ambient noise is unavoidable and
should be expected when used in loud
environments.).
Reposition and attach the microphone
to clothing upside-down. This reduces
excessive noise from breathing and tonal
inconsistencies caused by head
movements.
Microphone
Battery
Foam Windscreen
Smartphone/
Camera Mode
Switch
tzumi® On Air Battery Powered Microphone
Distributed by tzumi® INC. NY, NY 10016
©Copyright 2019 tzumi® All Rights Reserved. Made In China.
• Avoid placing the microphone too close to the user’s neck
or too far away from their face.
• Whenever possible, affix the microphone so that the cable
hangs down the user’s back instead of their front; doing so
helps hide the cable and prevents the cable from rustling
from regular movement. It also may prevent distractions
and provide a more comfortable experience for the user.
• You may use medical tape to safely adhere the microphone
/cable to the user’s skin if desired for extra stability.
• You may also find it helpful to tape a loose loop of the
microphone cable to the inside of your clothing. This
provides additional slack for the cable and isolation from
unwanted background noise.
NOTE: Not all cameras feature a microphone input; this should first
be verified with your camera manufacturer. Many camera models also
feature multiple ports for headphones, remote controls, and other
accessories, any of which may resemble a microphone input. Consult
your camera’s manufacturer user guide to ensure that you’re using the
correct port.
STEP 1: Unscrew the two connecting parts of the power module
and separate the pieces as shown.
STEP 2: Remove the old battery from its compartment in the
power module.
• You may wish to use a nonmetallic object, such as a
toothpick, to gently lift the battery up and out of the power
module. Do not push the battery side-to-side while lifting
it, or it will become stuck to the inside of the compartment.
STEP 3: Place the new battery in the power module, with the
+ and – polarity symbols oriented as shown
(the + symbol is stamped inside the battery compartment
for reference).

Produktspezifikationen

Marke: Tzumi
Kategorie: Nicht kategorisiert
Modell: On Air

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tzumi On Air benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Tzumi

Tzumi

Tzumi Sport Series Magnetic Earbuds Bedienungsanleitung

17 August 2024
Tzumi

Tzumi Dynamic Earbuds Bedienungsanleitung

13 August 2024
Tzumi

Tzumi On Air Bedienungsanleitung

11 August 2024
Tzumi

Tzumi USB-C Wired Earbuds Bedienungsanleitung

7 August 2024
Tzumi

Tzumi Pure Sound Bedienungsanleitung

12 Dezember 2023
Tzumi

Tzumi Inteligrip Bedienungsanleitung

15 November 2023
Tzumi

Tzumi AquaBoost Bedienungsanleitung

11 September 2023
Tzumi

Tzumi Megabass Bedienungsanleitung

31 Mai 2023
Tzumi

Tzumi One Grip Bedienungsanleitung

9 Mai 2023
Tzumi

Tzumi Super Bass Mini Speaker Bedienungsanleitung

6 Mai 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024