Tycon Systems TP-SCPOE-1224 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Tycon Systems TP-SCPOE-1224 (6 Seiten) in der Kategorie LadegerĂ€t. Dieser Bedienungsanleitung war fĂŒr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
TYCON POWER SYSTEMS
TYCON
TP-SCPOE-12XX Series
Solar & PoE Battery Charger
USER’S MANUAL
User’s Manual
TP-SCPOE-12XX Series
Features:
 Battery Polarity Reverse Protection
 Battery Over Charge Protection
 Battery Over Discharge Protection
 Solar Panel Polarity Reverse Protection
 Solar Panel Over Charge Protection
 Output Short Circuit Protection
 Output Over Voltage Protection
 POE Output Short Circuit Protection
 POE Output Support 802.3af Function (TP-SCPOE-1248D)
 Two Input method:
(1)Solar Panel (2)PoE Power source (Always Solar First.)
 Up to Three Outputs
 DIN Rail Mountable
User’s Manual
TP-SCPOE-12XX Series
Panel Description:
Item Name Descriptions
1 POE : PoE power input indicator: the LED lights when the PoE input jack
(the lower jack) has 18V~57V input.
2 SOL : Solar power input indicator: the LED lights when SOL terminal is
connecting to a solar panel and the solar panel input voltage is over
12V.
3 CHA : Charging indicator: the LED lights when BAT terminal is connected
to battery and charging
4 LOA : Loading indicator: the LED lights when the rear panel output
terminal is connecting to a device and oïŹ€ering power.
The LED always on when power ready.
5 REV : Battery polarity reverse indicator: the LED lights when the battery
polarities are reversed. (detail description see Sec. 5.1
6 IN : PoE Input Jack: the lower RJ45 jack, used for PoE input. Allowed
input voltage 18~57V
7 OUT : PoE Output Jack: the upper RJ45 jack, used for PoE output; Output
voltage depends on what model you selected.
8 Fuse
Fuse: for output over current protection, limiting the battery output
current <= 10A. (If solar panel or PoE source is installed before the
battery, and if the polarities of battery are reversed, then the fuse will
be burnt.)
9 SOL : Solar Panel Terminal: used to connect the solar panel.
10 BAT : Battery terminal: used to connect the battery.
NOTE: ALWAYS CONNECT THIS TERMINAL FIRST AND
DISCONNECT LAST.
11 LOA : Load Terminal: The output voltage is the same as battery voltage.
Maximum voltage clamped at 12.5V.


Produktspezifikationen

Marke: Tycon Systems
Kategorie: LadegerÀt
Modell: TP-SCPOE-1224

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tycon Systems TP-SCPOE-1224 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung LadegerÀt Tycon Systems

Bedienungsanleitung LadegerÀt

Neueste Bedienungsanleitung fĂŒr -Kategorien-