Tycon Systems TP-SCPOE-1218 Bedienungsanleitung

Tycon Systems Ladegerät TP-SCPOE-1218

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tycon Systems TP-SCPOE-1218 (6 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

TYCON POWER SYSTEMS

TYCON

TP-SCPOE-12XX Series

Solar & PoE Battery Charger

USER’S MANUAL

User’s Manual

TP-SCPOE-12XX Series

Features:

 Battery Polarity Reverse Protection

 Battery Over Charge Protection

 Battery Over Discharge Protection

 Solar Panel Polarity Reverse Protection

 Solar Panel Over Charge Protection

 Output Short Circuit Protection

 Output Over Voltage Protection

 POE Output Short Circuit Protection

 POE Output Support 802.3af Function (TP-SCPOE-1248D)

 Two Input method:

(1)Solar Panel (2)PoE Power source (Always Solar First.)

 Up to Three Outputs

 DIN Rail Mountable

User’s Manual

TP-SCPOE-12XX Series

Panel Description:

Item Name Descriptions

1 POE : PoE power input indicator: the LED lights when the PoE input jack

(the lower jack) has 18V~57V input.

2 SOL : Solar power input indicator: the LED lights when SOL terminal is

connecting to a solar panel and the solar panel input voltage is over

12V.

3 CHA : Charging indicator: the LED lights when BAT terminal is connected

to battery and charging

4 LOA : Loading indicator: the LED lights when the rear panel output

terminal is connecting to a device and oﬀering power.

The LED always on when power ready.

5 REV : Battery polarity reverse indicator: the LED lights when the battery

polarities are reversed. (detail description see Sec. 5.1

6 IN : PoE Input Jack: the lower RJ45 jack, used for PoE input. Allowed

input voltage 18~57V

7 OUT : PoE Output Jack: the upper RJ45 jack, used for PoE output; Output

voltage depends on what model you selected.

8 Fuse

Fuse: for output over current protection, limiting the battery output

current <= 10A. (If solar panel or PoE source is installed before the

battery, and if the polarities of battery are reversed, then the fuse will

be burnt.)

9 SOL : Solar Panel Terminal: used to connect the solar panel.

10 BAT : Battery terminal: used to connect the battery.

NOTE: ALWAYS CONNECT THIS TERMINAL FIRST AND

DISCONNECT LAST.

11 LOA : Load Terminal: The output voltage is the same as battery voltage.

Maximum voltage clamped at 12.5V.

Produktspezifikationen

Marke:	Tycon Systems
Kategorie:	Ladegerät
Modell:	TP-SCPOE-1218
Breite:	159 mm
Tiefe:	118 mm
Gewicht:	312 g
Produktfarbe:	Schwarz
Höhe:	40 mm
Energieschutzeigenschaften:	Over voltage, Overcharge, Overdischarge, Reverse polarity, Short circuit
Eingebautes Display:	Nein
Betriebstemperatur:	-30 - 60 °C
Stromverbrauch (Standardbetrieb):	0.5 W
Menge pro Packung:	1 Stück(e)
Akku-/Batteriespannung:	12 V
Ausgangsstrom:	1.67 A
Ausgangsspannung:	18 V
Eingangsspannung:	- V
Eingangsfrequenz:	- Hz
Polungs-Rückwärtsspannungsschutz:	Ja