Truetone 1 Spot Pro CS7 Bedienungsanleitung

Truetone Nicht kategorisiert 1 Spot Pro CS7

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Truetone 1 Spot Pro CS7 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.Truetone.com
IMPORTANT SAFETY INSTRUCTIONS
1. All the safety and operating instructions should be read before this
product is operated. Keep these instructions for future reference.
2. Pay attention to all warnings on the power supply and in the operating
instructions.
3. WARNING: Do not use this device near water or any other liquid.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not use this device near any heat sources.
7. Do not remove the power plug grounding pin on the input cable.
8. Protect all input and output power cables from being walked on or
pinched.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the brackets and screws provided with this power
supply.
11. Unplug this device during lightning storms or when unused for long
periods of time.
12. Refer all repairs to qualified personnel at Truetone or an authorized
Truetone distributor. Under no circumstances should the power
supply be opened by the user.
13. This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
- WARNING: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the
appliance.
14. The maximum ambient temperature should not exceed 35 degree C.
15. Date code: YYMM, YY means year, MM means month. For example:
1412 represents Year 2014, December.
Owners Manual
Need some great pedals to go
with your 1 SPOT Pro?
Check out Truetone
*
pedals at
Truetone.com
* Truetone was formerly known as Visual Sound; the makers
of Jekyll & Hyde, Route 66, H2O, Visual Volume and
The 1 SPOT!
Mounting your 1 SPOT Pro under a Pedaltrain
Âź
pedalboard:
The 1 SPOT Pro comes with 2 metal brackets, 4 black machine screws and 4
silver thread-forming screws. The black machine screws are for attaching the
metal brackets to the sides of the 1 SPOT Pro, and the thread-forming screws
are for attaching the brackets to the Pedaltrain
Âź
, as shown below. There is no
need to pre-drill holes for the screws if you are using a powered screwdriver.
Make sure the 1 SPOT Pro is
slanted during mounting, so that
the IEC input socket is in between the
rails of the Pedaltrain. To help position it
correctly, you can put a 9V battery under the
1 SPOT Pro (center-back of the unit), which
will raise the back to the proper height the
battery is only acting as a temporary spacer.
After the 4 thread-forming screws are installed, push the 9V battery out.
Congratulations on your purchase of the 1 SPOT Pro CS7 Power Supply by
Truetone! The 1 SPOT Pro CS7 provides 7 outputs to power just about any
effect pedal. All 7 outputs are completely isolated, regulated, and filtered to
provide quiet and safe operation for your valuable effects pedals.
The 1 SPOT Pro CS7 contains the following:
1 SPOT Pro CS7 Power Supply
Power cables:
(4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
Converter Plugs:
(1) CL6 – Green
(1) CYR – Red
(1) C35 – Black
(1) CBAT – Black battery clip
The proper powering of effects pedals is much misunderstood, but necessary
knowledge that every effect user must have. It is the difference between proper
functionality of your pedal, or potentially damage to it. To properly use the 1
SPOT Pro CS7 along with your effects devices, you must know both the power
requirements of your pedals, and the capabilities of the 1 SPOT Pro CS7 power
supply. We will concentrate on the latter first.
Specifications of the 1 SPOT Pro CS7:
Input: 100-240V~, 50/60Hz, 0.55A (Worldwide input voltage)
Outputs: 7 Outputs are as shown below: (Outputs 2-5 are switchable)
1 2 3 4 5 6 7
Note: These numbers do not
appear on the actual unit.
Note: This symbol
indicates DC voltage.
The bottom panel of the 1 SPOT Pro CS7 contains 4-mini switches that change
the voltage output of outputs 2-5.
Switch 1 corresponds to Output-2 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 200mA
Switch 2 corresponds to Output-3 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 200mA
Switch 3 corresponds to Output-4 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 200mA
Switch 4 corresponds to Output-5 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 200mA
Voltage Input:
The 1 SPOT Pro CS7 can be used anywhere in the world without the use of a
step-up or step-down transformer. Like our 1 SPOT, it transforms wall voltage from
100-240Vac, and converts it into the stated voltages on the front panel on the unit.
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every
pedal that you are going to power via the 1 SPOT Pro CS7, you need to know the
following:
1. What is the voltage required by the pedal?
2. Does the pedal require AC or DC voltage?
3. What is the polarity of the pedal? (Center pin positive or negative.)
These questions can usually be answered by:
1. Inspecting the pedal itself near the power jack.
2. Referring to the owner’s manual.
3. Checking online, or contacting the manufacturer
4. If your pedal can be powered by a 9Vdc battery, it can be powered by one
of the 9Vdc outputs (exception being the Boss ACA pedals, see below).
Notes on certain pedals:
‱ Some older Boss pedals require 12Vdc, yet can be powered by a 9Vdc
battery. They will indicate “Use ACA adaptor” near the power jack. To
power an ACA pedal please use outputs 2-5, and set to 12Vdc on the dip
switch for the corresponding output. Modern Boss pedals will indicate
“PSA,” and can be powered by any of the 1 SPOT Pro CS7’s 9Vdc
outputs.
‱ Many germanium based fuzzes and Octavia-style pedals will require the
use of the CYR adaptor to reverse the polarity to center pin positive.


Produktspezifikationen

Marke: Truetone
Kategorie: Nicht kategorisiert
Modell: 1 Spot Pro CS7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Truetone 1 Spot Pro CS7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Truetone

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-