Tripp Lite CSC42AC Bedienungsanleitung

Tripp Lite Ladegerät für Mobilgerät CSC42AC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite CSC42AC (32 Seiten) in der Kategorie Ladegerät für Mobilgerät. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identiﬁcation 3

4. Zone Labeling 5

5. Setup 6

5.1 Power Requirements 6

5.2 Installing the Handle Bracket, 6

Corner Safety Bumpers and

Power Cord Manager

5.3 Connecting Devices and 7

Powering the AC Unit

5.4 Door Locks 8

6. Operation 9

7. Optional Display Mount Adapter Kit 10

8. Speciﬁcations 10

9. Storage, Service and Cleaning 10

10. Warranty and Product Registration 11

Español 12

Français 23

Charging Station Carts

Models: CSC42AC (42 Slots),

CSC45AC (45 Slots), CSC48AC (48 Slots)

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

AC Unit:

• Do not use a power adapter to connect the charging station to a power source. Use only the charging station’s AC plug to connect directly to

the supply mains.

• To remove the AC unit from the supply mains, the power cord serves as a disconnect device.

• If any of the following situations arise, schedule an appointment to have your equipment inspected by a service technician:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external

ventilation openings.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack the charging station unassisted.

Use a mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials

may cause product damage that will void the warranty.

• The charging station includes four pre-installed locking/swivel casters.

• Always use the included handle when moving the charging station (see section 5.2 Installing the Handle Bracket Corner Safety Bumpers and

Power Cord Manager for more information).

• When moving the charging station cabinet, always push it from behind; never pull it toward you.

• A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a ramp is

required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.

Your charging station is an all-in-one solution for storing and charging devices. With four pre-installed locking/swivel casters and an attachable,

reversible handle accessory, your charging station is ideal for mobile applications. The charging station features a built-in charging timer unit that

alternates the charge hourly between two zones. To prevent theft and device tampering, your charging station enclosure comes equipped with locking

steel doors. A padlock hasp located on the front door provides an extra measure of security.

External Receptacles

Powered

(Internally Switched)

Red

Zone

Blue

Zone

Main Power

3. Feature Identification

Front View

1 Laminate Desktop Surface

2 Reversible Handle

3 Convenience Outlets and LED Status Indicators

4 Power Cord Manager

5 Power Cord Access Hole

6 10 ft. Power Cord with 5-15P Plug

7 Corner Safety Bumpers (6 Total)

8 Storage Shelves with Dividers*

9 Locking Front Door

Swivel Locking Casters

Cat6 RJ45 Pass Through

Padlock Hasp

Included Accessory Hardware

10 x Hex Screws Hex Key Keys

*Each storage shelf is divided into two zones (Red and Blue). The device spaces for each zone are numbered. For more information, refer to 4. Zone Labeling.