Trimble Juno T41 M Bedienungsanleitung

Trimble Barcode-Leser Juno T41 M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Trimble Juno T41 M (39 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/39
Version 1.00
Revision A
December 2012
U GSER UIDE
Trimble Juno T41 handheld
1
Corporate Office
10355 Westmoor Drive
Suite #100
Westminster, CO 80021
USA
www.trimble.com
Legal Notices
© 2012, Trimble Navigation Limited. All rights reserved.
Trimble,the Globe & Triangle logo are trademarks of Trimble Navigation
Limited, registered in the United States and in othercountries. Juno is a
trademark of Trimble Navigation Limited.
The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Trimble Navigation Limited is under
license.
Android is a trademark of Google Inc.
Microsoft, Vista, Windows, and Windows Media are either registered
trademarks or trademarks of MicrosoftCorporation in the United States
and/or other countries.
All other trademarks are the property of their respective owners.
Release Notice
This is the January 2013 release (Revision A) of the Trimble Juno T41
handheld documentation.
Limited Warranty Terms and Conditions
Product Limited Warranty
Subject tothe terms and conditions set forth herein, Trimble Navigation
Limited (“Trimble”) warrants that for a period of (1) year from date of
purchase this Trimble product (the “Product”) will substantially conform
to Trimble's publicly available specifications for the Product and that the
hardware and any storage media components of the Product will be
substantially free from defects in materials and workmanship.
Product Software
Product software, whether built into hardware circuitry as firmware,
provided as a standalone computersoftware product, embedded in flash
memory, or stored on magnetic or other media, is licensed solely for use
with or as an integral part of the Product and is not sold. The terms of the
end user license agreement, as included below, govern the use of the
Product Software, including any differing limited warranty terms,
exclusions and limitations, which shall control over the terms and
conditions set forth in the limited Product warranty.
Warranty Remedies
If the Trimble Product fails during the warranty period for reasons
covered by this limited warranty and you notify Trimble of such failure
during the warranty period, Trimble will repair OR replace the
nonconforming Product with new, equivalent to new, or reconditioned
parts or Product, OR refund the Product purchase price paid by you, at
Trimble’s option,upon yourreturn of the Product in accordance with
Trimble's product return procedures then in effect.
How to Obtain Warranty Service
To obtain warranty service for the Product, please contact your Trimble
dealer. Alternatively, you may contact Trimble to request warranty
service at +1-408-481-6940 (24 hours a day) or email your request to
trimble_support@trimble.com. Please be prepared to provide:
– your name, address, and telephone numbers;
– proof of purchase;
– a copy of this Trimble warranty
– a description of the nonconforming Product including the model
number; and
– an explanation of the problem.
The customerservice representative may need additional information
from you depending on the nature of the problem.
Warranty Exclusions and Disclaimer
This Product limited warranty shall only apply in the event and to the
extent that (i) the Product is properly and correctly installed, configured,
interfaced, maintained, stored,and operatedin accordance with
Trimble's applicable operator's manual and specifications, and; (ii) the
Product is not modified ormisused. This Product limited warranty shall
not apply to, and Trimble shall not be responsible for, defects or
performance problems resulting from (i) the combination or utilization of
the Product with hardware or software products, information, data,
systems, interfaces, or devices not made, supplied, or specified by
Trimble; (ii) the operation of the Product under any specification other
than, or in addition to, Trimble's standard specifications for its products;
(iii) the unauthorized installation, modification, or use of the Product; (iv)
damage caused by: accident, lightning or other electrical discharge, fresh
or salt water immersion or spray (outside of Product specifications); or
exposure to environmental conditions for which the Product is not
intended; (v) normal wear and tearon consumable parts (e.g.,
batteries); or (vi) cosmetic damage. Trimble does not warrant or
guarantee the results obtained through the use of the Product or
Software, or that software components will operate error free.
NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY
CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED
AUGMENTATION SYSTEMS (SBAS) (WAAS, EGNOS, AND MSAS),
OMNISTAR, GPS, MODERNIZED GPS OR GLONASS SATELLITES, OR
FROM IALA BEACON SOURCES: TRIMBLE IS NOT RESPONSIBLE FOR
THE O PERATIO N OR FAILURE OF OPERATION OF ANY SATELLITE
BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY
SATELLITE BASED POSITIONING SIGNALS.
THE F OREGOING LIMI TED WARRANTY TERMS STATE TRIMBLE’S
ENTIRE LIABILITY, AND YOUR EXCLUSIVE REMEDIES, RELATINGTO THE
TRIMBLE PRODUCT. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED
HEREIN, THE PRODUCT, AND ACCOMPANYING DOCUMENTATION AND
MATERIALS ARE PROVIDED “AS-IS” AND WITHOUT EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, BY EITHER TRIMBLE OR ANYONE
WHO HAS BEEN INVOLVED IN ITS CREATION, PRODUCTION,
INSTALLATION, OR DISTRIBUTION, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. THE
STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR
LIABILITIES ON THE PART OF TRIMBLE ARISING OUT O F, OR IN
CONNECTION WITH, ANY PRODUCT. BECAUSE SOME STATES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE
EXCLUSION OF AN IMPLIED WARRANTY,THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
Limitation of Liability
TRIMBLE'S ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE
LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGE WHATSOEVER
UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANYWAY
TO THE PRODUCTS, SOFTWARE AND ACCOM PANYING
DOCUMENTATION AND MATERIALS, (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF DATA, OR ANY OTHER PECUNIARY LOSS),
REGARDLESS OF WHETHER TRIMBLE HAS BEEN ADVISED OF THE
POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF
DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND
TRIMBLE. BECAUSE SOME STATES AND JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
PLEASE NOTE: THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS
WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE JURISDICTIONS
(E.G., MEMBER STATES OF THE EUROPEAN ECONOMIC AREA) IN
WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY OF THE
LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED. IN SUCH
A CASE, PLEASE CONTACT YOUR TRIMBLE DEALERFOR APPLICABLE
WARRANTY INFORMATION.
Notice to Australian Purchasers - The Australian Consumer
Law
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired orreplaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Trimble's warranty, as set out in the user manual accompanying this
statement, oras described in the warranty card accompanying the
Product you purchased, is in addition to any mandatory rights and
remedies that you may have under the Australian Consumer Law.
Trimble Juno T41 User Guide 2
Official Language
THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS
ENGLISH. IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND
OTHER LANGUAGE VERSIONS,THE ENGLISH LANGUAGE SHALL
CONTROL
Registration
To receive information regarding updates and new products, please
contact your local dealeror visit the Trimble website at
www.trimble.com/register. Upon registration you may select the
newsletter, upgrade, ornew product information you desire.
Notices
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a
Class B digital device,pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordancewith the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealeror an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer
or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission rules.
The radios in this device have been designed and manufactured to not
exceed stipulated emission limits for exposure to radio frequency (RF)
energy as required by the Federal Communications Commission of the
U.S. Government 47 C.F.R. § 2.1091 and 2.1093. The external antenna
connector provided in this device is for GNSS antennas only.
IC
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
This Category II radio communication device complies with Industry
Canada Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II respecte la norme
CNR-310 d’Industrie Canada.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliant with SAR for general population/uncontrolled
exposure limits in IC RSS-102 and had been tested in accordance with
the measurement methods and procedures specified in IEEE 1528. This
equipment should be installed and operated with minimum distance 0.5
cm between the radiator & your body.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter. The County Code
Selection feature is disabled for products marketed in the US/Canada.
CE
a. Caution:
• Risk of explosion if battery replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
b. Make sure the temperature for adapter will not be higher than 40 ˚C.
CE SARCompliance
This device meets the EU requirements (1999/519/EC) on the limitation
of exposure of the general public to electromagnetic fields by way of
health protection.
The limits are part of extensive recommendations for the protection of
the general public. These recommendations have been developed and
checked by independent scientific organizations through regular and
thorough evaluations of scientific studies. The unit of measurement for
the European Council's recommended limit for mobile devices is the
"Specific Absorption Rate" (SAR), and the SAR limit is 2.0 W/ kg
averaged over 10 gram of body tissue. It meets the requirements of the
International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For body worn operation, this device has been tested and meets the
ICNIRP exposure guidelines and the European Standard EN 62311 and
EN 62209-2, for use with dedicated accessories. Use of other accessories
which contain metals may not ensure compliance with ICNIRP exposure
guidelines.
Canada
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de Classe B
prescrites dans le règlement sur le brouillage radioélectrique édicté par
le Ministère des Communications du Canada.
Antenna Statement
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication. Conformément
à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de
réduire les risques debrouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
Licence exempt
This device complies with Industry Canada licence-exempt RSS standard
(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Europe / EUConformance
The following CE compliance
information is applicable to this device
that carry the following CE mark:
This product has been tested and found to comply with all requirements
for CE Marking and sale within the European EconomicArea (EEA).
The Trimble Juno T41 has Bluetooth wireless technology approval in
most EU countries and satisfies the requirements for Radio and
Telecommunication Terminal Equipment specified by European Council
Directive 1999/5/EC. These requirements provide reasonable protection
against harmful interference when the equipment is operated
appropriately in a residential or commercial environment.
Juno T41 handhelds equipped with wireless cellular modem radios are
intended forconnection to European Networks operating with GSM 900,
or GSM 1800. A copy of the CE Declaration of Conformity for the Juno
T41handheld can be accessed from
http://www.trimble.com/support.shtml.
Australia and New Zealand
This product conforms with the regulatory requirements of
the Australian Communications Authority (ACA) EMC and
Radiocommunications framework, thus satisfying the
requirements for C-Tick Marking and sale within Australia and New
Zealand.
Additionally, Juno T41 3.5G products that incorporate a
modem also comply with the requirements for A-Tick
Marking and sale in Australia.
Trimble Juno T41 User Guide 3

Produktspezifikationen

Marke: Trimble
Kategorie: Barcode-Leser
Modell: Juno T41 M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Trimble Juno T41 M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Barcode-Leser Trimble

Trimble

Trimble NMD 900B Bedienungsanleitung

16 August 2024
Trimble

Trimble Juno T41 M Bedienungsanleitung

8 August 2024
Trimble

Trimble Nomad 900XE Bedienungsanleitung

7 August 2024
Trimble

Trimble Juno T41 C Bedienungsanleitung

20 Januar 2024
Trimble

Trimble Nomad 900X Bedienungsanleitung

22 August 2023

Bedienungsanleitung Barcode-Leser

Neueste Bedienungsanleitung für -Kategorien-

Honeywell

Honeywell 7800LWN Bedienungsanleitung

6 Oktober 2024
Renkforce

Renkforce 7A CR6307A Bedienungsanleitung

3 Oktober 2024
Honeywell

Honeywell Dolphin 99EX Bedienungsanleitung

3 Oktober 2024
Datalogic

Datalogic MGL8500X Bedienungsanleitung

23 September 2024
IFM

IFM O2I501 Bedienungsanleitung

22 September 2024
Datalogic

Datalogic Matrix 120 Bedienungsanleitung

13 September 2024
Honeywell

Honeywell ScanPal EDA50K Bedienungsanleitung

13 September 2024
Datalogic

Datalogic Joya Touch Plus Bedienungsanleitung

12 September 2024
Posiflex

Posiflex CD-3602U Bedienungsanleitung

6 September 2024
Posiflex

Posiflex CD-3202U Bedienungsanleitung

6 September 2024