TP-Link Tapo C400S2 Bedienungsanleitung
TP-Link
Fotocamera
Tapo C400S2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link Tapo C400S2 (3 Seiten) in der Kategorie Fotocamera. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
*Images may dier from your actual product.
©2022 TP-Link 7106509765 REV1.0.0
03 / Set Up Hub
and Camera
1. Get the Tapo app from the App Store or
Google Play.
1. Twist anti-clockwise and then pull to remove
the cover of the camera. Insert the battery.
Note:
1. Charge the battery before use. It will take about 5~6 hours.
2. If you want to use the camera while charging the battery, we
recommend purchasing another battery for your convenience.
2. Align the indicator line on the cover with the
arrow icon on the camera body.
Press and rotate clockwise to the lock position
to replace the cover.
2. Follow the instructions in the Tapo app to set
up your hub.
3. Follow the instructions in the Tapo app to set
up your camera.
OR
05 / Mount
to the Wall
04 / Installation
Options
Stick the mounting template
to the desired mounting
place. Drill 3 holes according
to the template.
1. Drill HolesOption 1. Set on a Table
Install
Option 2. Mount to the Wall
01 / Charge the
Battery
Method 2: Battery Inside Camera
*Check the battery status in the Tapo app after setup.
02 / Insert the
Battery
2. Install the Bracket
Insert three anchors into
the holes and use the
screws to aîž±x the bracket
over the anchors.
3. Install the Camera
Install the camera on the
mounting bracket, and
adjust the camera angle.
Rotate to secure
the bracket
Rotate after installing
Rotate to secure
the bracket
Rotate after installing
Install
5V USB Charger
RES
SYNC
ET
/
Solid amber
Solid green
Method 1: Battery
5V USB Charger
Charging:
Fully charged:
Closed
Open
Smart Wire-Free Security
Camera System
Quick Start Guide
1
2
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions, please
don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical care.
Consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids to determine if they are adequality
shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• Product should be kept away from heat sources such as radiators,
cookers etc. - it should not be placed in places where the
temperature is less than -20 degrees or greater than 45 degrees.
• This product may interfere with other electronic products such as TV,
radios, personal computers, phones or other wireless devices.
• Always follow the local waste and recycle laws when you get rid of the
used battery.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce/
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
Camera Appearance Hub Appearance Light Indications
Hub Status LED
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Starting up
Connected to the cloud
Connected to router
Hub resetting
Hub updating
Blinking red and green Ready for setup
Blinking green slowly Pairing
Camera Status LED
Blinking red and green
Solid Red
Blinking red once a minute
Blinking green quickly Camera updating
Blinking red quickly Camera resetting
Ready for pairing
Pairing
Blinking red slowly
Blinking green slowly
Solid green Connected to the cloud
Solid amber Connected to the hub
Starting up
Low battery
Oîž²ine
CAUTION!
Avoid replacement of a battery with an incorrect type that can
defeat a safeguard.
Avoid disposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery, that can result in
an explosion.
Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of îž°ammable liquid or gas; Do not leave a battery
subjected to extremely low air pressure that may result in an
explosion or the leakage of îž°ammable liquid or gas.
CAUTION!
Risk of re or explosion
if the battery is replaced by an incorrect type
Safety Information
Camera Operating Temperature: -20 °C ~ 45°C (-4°F ~ 113°F)
Camera Operating Humidity: 10%~90%RH, Non-condensing
Hub Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)
Hub Operating Humidity: 10%~90%RH, Non-condensing
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
For technical support, user guides,
FAQs, warranty and more, please visit
www.tapo.com/support/
â–²microSD card not included.
1SYNC Button
Press to pair with the camera, or silence the hub when it rings.
2RESET
Use a pin to press and hold for about 5 seconds until the hub
LED quickly blinks red to reset the hub.
3microSD Card Slot
Insert a microSD card to record camera videos locally.
Initialize the microSD card within the Tapo app rst.
4Status LED
Indicate the status of your hub.
Indicate the status of your camera. While the camera is powered on:
Front Back
Micro SD
1 2 3
4
1
3Motion Sensor
4Status LED
2Light Sensor
Lens
5Microphone
SYNC/RESET Button
7
Press for 1 second: Pair with the hub
Press and hold for about 5 seconds: Reset the camera
RES
SYNC
ET
/
7
42 5
1
3
Produktspezifikationen
Marke: | TP-Link |
Kategorie: | Fotocamera |
Modell: | Tapo C400S2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TP-Link Tapo C400S2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fotocamera TP-Link
11 September 2024
11 September 2024
25 August 2024
Bedienungsanleitung Fotocamera
- Fotocamera Samsung
- Fotocamera Acer
- Fotocamera Sanyo
- Fotocamera BenQ
- Fotocamera Gembird
- Fotocamera Lexibook
- Fotocamera Medion
- Fotocamera Philips
- Fotocamera Sony
- Fotocamera Trust
- Fotocamera Panasonic
- Fotocamera Laserliner
- Fotocamera Canon
- Fotocamera Technaxx
- Fotocamera Bresser
- Fotocamera Denver
- Fotocamera König
- Fotocamera Blaupunkt
- Fotocamera Pyle
- Fotocamera Lenco
- Fotocamera Polaroid
- Fotocamera EZVIZ
- Fotocamera Imou
- Fotocamera Hitachi
- Fotocamera Olympus
- Fotocamera Bushnell
- Fotocamera Casio
- Fotocamera ViewSonic
- Fotocamera Scosche
- Fotocamera Marshall Electronics
- Fotocamera Fujifilm
- Fotocamera MINOX
- Fotocamera Nikon
- Fotocamera Ricoh
- Fotocamera Sigma
- Fotocamera Kodak
- Fotocamera Agfa
- Fotocamera Easypix
- Fotocamera Konica-Minolta
- Fotocamera Leica
- Fotocamera Minolta
- Fotocamera Pentax
- Fotocamera Praktica
- Fotocamera Rollei
- Fotocamera SeaLife
- Fotocamera Traveler
- Fotocamera Contax
- Fotocamera Fuji
- Fotocamera Konica
- Fotocamera Mamiya
- Fotocamera Aplic
- Fotocamera Akaso
- Fotocamera Nest
- Fotocamera Avaya
- Fotocamera Kogan
- Fotocamera Elmo
- Fotocamera Lumens
- Fotocamera Eufy
- Fotocamera Kyocera
- Fotocamera Cobra
- Fotocamera Burris
- Fotocamera Celestron
- Fotocamera Levenhuk
- Fotocamera Ring
- Fotocamera SereneLife
- Fotocamera Swann
- Fotocamera Aida
- Fotocamera EVE
- Fotocamera Ozito
- Fotocamera Foscam
- Fotocamera Fluke
- Fotocamera Hikvision
- Fotocamera FLIR
- Fotocamera Arlo
- Fotocamera General Electric
- Fotocamera Dörr
- Fotocamera Lorex
- Fotocamera Zorki
- Fotocamera HOLGA
- Fotocamera Joy-it
- Fotocamera Kyocera Yashica
- Fotocamera Leitz Focomat IIc
- Fotocamera Meade
- Fotocamera Moto Mods (Motorola)
- Fotocamera Silvergear
- Fotocamera Spypoint
- Fotocamera Vivitar
- Fotocamera ZeissIkon
- Fotocamera Vimar
- Fotocamera Intel
- Fotocamera Dahua Technology
- Fotocamera AgfaPhoto
- Fotocamera Speco Technologies
- Fotocamera Getac
- Fotocamera Hanwha
- Fotocamera Runcam
- Fotocamera BZBGear
- Fotocamera Moultrie
- Fotocamera Brinno
- Fotocamera UniView
- Fotocamera AViPAS
- Fotocamera Kobian
- Fotocamera Ansco
- Fotocamera Digital Watchdog
- Fotocamera Ikegami
- Fotocamera Z CAM
- Fotocamera Ikelite
- Fotocamera GoXtreme
- Fotocamera Red Digital Cinema
- Fotocamera Watec
- Fotocamera Fantasea Line
- Fotocamera Ergoguys
- Fotocamera Videology
- Fotocamera Adeunis
- Fotocamera Hoppstar
- Fotocamera Camouflage
- Fotocamera HuddleCamHD
- Fotocamera AquaTech
- Fotocamera PTZ Optics
- Fotocamera Linhof
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
17 September 2024
17 September 2024
17 September 2024
16 September 2024
15 September 2024
14 September 2024
11 September 2024
8 September 2024
8 September 2024