TP-Link Archer D5 Router Bedienungsanleitung

TP-Link Archer D5 Router

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr TP-Link Archer D5 Router (2 Seiten) in der Kategorie . Dieser Bedienungsanleitung war fĂĽr 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Verify that the hardware connection
is correct by checking these LEDs.
4
Note:
1. The ADSL LED takes about 1 to 2 minutes to stabilize.
2. If the Wireless LED is o, please press the Wi-Fi button on the rear
panel for 2 seconds, then check the LEDs again in a few seconds.
Power On
OnWirelessOnADSL
Quick Installation Guide
Connecting the Hardware
ADSL Splitter
Phone Jack
Connect to the phone (Optional)
2 Connect the modem router to the
ADSL splitter.
3 Turn on the modem router.
Power Adapter
If you don’t need the phone service, just directly connect the modem router to
the phone jack with a phone cable, then follow steps 3 and 4 to complete the
hardware connection.
1 Connect the ADSL splitter
to the phone jack.
Modem Router
AC1200 Wireless Dual Band
Gigabit ADSL2+ Modem Router
7106505572 REV3.0.1
D5
Conguring the Modem Router
LED Indicators
Tether App
USB Features FAQ (Frequently Asked Questions)
Wired
Wireless
Connect wirelessly by using the SSID (network name) and Wireless Password printed on the
product label at the bottom of the modem router.
Connecting your computer to the modem router (Wired
or Wireless)
Conguring the modem router via a web browser
Select your ISP from the ISP List or select Other if you can’t nd your ISP, then
click Next. Follow the step-by-step instructions of the Quick Setup to complete
the initial conguration.
D
Select your Region and Time Zone, then click Next.
C
Enter the password you created and click Log in.
Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
1.
2.
B
A
http://tplinkmodem.net
Use the USB port for media sharing, storage sharing and printer sharing across your
local network. You can also setup an FTP server to access your files remotely through
the Internet.
Remote Access
via FTP Server Printer Sharing
Local Storage
Sharing
Media Sharing
To learn more about the USB features, visit http://tp-link.com/app/usb or simply scan the QR code.
Q1. What can I do if the login page does not appear?
A1. Make sure the computer is connected to the modem router properly.
A2. If the computer is set to a static or xed IP address, change it to obtain an IP address
automatically from the modem router.
A3. Verify http://tplinkmodem.net is correctly entered in the web browser and press
Enter.
A4. Use another web browser and try again.
A5. Reboot your modem router and try again.
A6. Disable and enable the active network adapter.
Q2. What can I do if I cannot access the Internet?
A1. Make sure the telephone and Ethernet cables are plugged in correctly.
A2. Try to log into the web management page of the modem router using the default
address at http://tplinkmodem.net. If you can, try the following answers. If you cannot,
change your computer to obtain an IP address automatically from the modem router.
A3. Consult your ISP and make sure all the VPI/VCI, Connection Type, account username
and password are correct. If they are not, please replace them with the correct settings
and try again.
A4. Restore the modem router to its factory default settings and recongure the modem
router by following the instructions in this Quick Installation Guide.
A5. Please contact our Technical Support if the problem still exists.
Q5. What can I do if the ADSL LED does not turn solid on?
A1.
Check your cables and make sure they are all plugged in correctly, including the
telephone lines and power adapter.
A2. Manually change your DSL settings. Log into the modem router’s web management
page. Go to Advanced > Network > DSL Settings, change the DSL Modulation Type
to G.dmt, and click Save. You will be prompted a disconnection, and click Yes to
continue. If this cannot work, try to change the DSL Modulation Type to ADSL2.
A3. Restore your modem router to its factory default settings.
A4. Remove the ADSL splitter, directly connect the modem router to the phone jack and
then recongure the modem router by following the instructions in this Quick
Installation Guide.
A5. Contact your ISP to verify if the ADSL line is in good status.
A6. If you have tried all the suggestions above and the problem still exists, contact our
Technical Support.
Q4. What can I do if I forget my password?
Web Management page password:
Restore the modem router to its factory default settings and then set a new password
using 1-15 characters.
Wireless Network password:
A1. The default Wireless Password/PIN is printed on the product label of the modem
router.
A2. If the default wireless password has been changed, log into the modem router's web
management page and go to Basic > Wireless to retrieve or reset your password.
Ethernet cable
Note: For advanced settings, please refer to the User Guide on TP-LINK ocial website at www.tp-link.com.
Note: If the login page does not appear, please refer to FAQ->Q1.
Note: For subsequent logins, use your password you have created.
Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. must be xed to the U.S. region only.
TP-LINK Tether app lets you conveniently access the modem router and:
View information about the clients on your network.
Block network access from specic users or devices.
Set up Parental Control with access time and content restrictions.
Change the basic wireless network settings easily.
Scan the QR code and download the TP-LINK Tether App from the
Apple App Store or Google Play.
1.
2.
3.
Ensure your smart device is wirelessly connected to your home network.
Launch the Tether app and start managing your home network.
How to begin?
HighMiddleLow
Save
United Kingdom
(GMT) Greenwich Mean Time: Dublin, Edinburgh, London, Lisbon
Region:
Time Zone:
Next
USB Sharing Port
©2015 TP-LINK
Confirm Password
New Password
Q3. How do I restore the modem router to its factory default
settings?
A1. With the modem router powered on,
use a pin to press and hold the RESET
button on the rear panel of the modem
router for 8 seconds until all LEDs turn
o momentarily, then release the
button.
A2. Log into the web management page of the modem router, and go to Advanced >
System Tools > Backup & Restore, click Factory Restore and wait until the reset
process is complete.
RESET Button Use a Pin to Press & Hold 8 seconds
2
LED Status Indication
(WPS)
On
(LAN) O
On
O
On
On
(ADSL) Flashing
O
(Internet)
(Wireless)
O
On
(Power)
(USB)
O
On
Flashing
On
Flashing
O
System initialization complete.
System initializing or rmware upgrading is in process. Do not disconnect or
power o the modem router.
Power is o.
ADSL line is synchronized and ready to use.
The ADSL negotiation is in progress.
ADSL synchronization failed.
Internet connection is available.
No Internet connection or the modem router is operating in Bridge mode.
The wireless 2.4GHz or 5GHz band is enabled.
The wireless function is disabled.
At least one LAN port is connected.
No LAN port is connected.
The USB device is identied and ready to use.
The USB device is being identied.
No USB device is plugged into the USB port.
A WPS synchronization is established.
A wireless device is trying to connect to the network via WPS. This process
may take up to 3 minutes.
A WPS synchronization has been established for more than 5 minutes or a
WPS synchronization failed.
Flashing
O


Produktspezifikationen

Marke: TP-Link
Kategorie:
Modell: Archer D5 Router

Brauchst du Hilfe?

Wenn Sie Hilfe mit TP-Link Archer D5 Router benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung TP-Link

Bedienungsanleitung

Neueste Bedienungsanleitung fĂĽr -Kategorien-