Tot Mate TM8362R Bedienungsanleitung


Lesen Sie kostenlos die πŸ“– deutsche Bedienungsanleitung fΓΌr Tot Mate TM8362R (6 Seiten) in der Kategorie SpΓΌlbecken. Dieser Bedienungsanleitung war fΓΌr 48 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
1
#0964-3145
3594.TM8360/TM8362.9/25/18
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
CAUTION – CHOKING HAZARD
Adult assembly required due to presence
of small parts and sharp edges.
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools
and excess materials from work area after assembly of unit is complete. Dispose of pallet
and packaging materials in an environmentally friendly manner. If any parts are missing
or damaged, please call Stevens for immediate parts replacement (1-800-350-3270).
When ordering parts, give the Model Number and Color of the unit.
NOTE: ASSEMBLY INSTRUCTIONS REFERENCE
ILLUSTRATIONS AND PART NUMBERS FOR THE TM8362R.
by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 β€’ F: 217-857-7101
www.totmate.com
TM8360R
TM8362R
TM8362R
Double Wall Vanity
IMPORTANT!
Assembly must be securely attached to
building structure with anchoring devices
of appropriate type, size and quantity in
accordance with applicable codes and
accepted installation practices.
3DUWVξ˜ƒ/LVW
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜“ξ˜”ξ˜”
ξ˜šξ˜”;;ξ˜ξ˜“ξ˜™ξ˜˜ξ˜˜ξ˜”ξ˜•
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜—ξ˜›ξ˜”ξ˜–
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜—ξ˜œξ˜œξ˜”ξ˜—
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜–ξ˜šξ˜”ξ˜˜
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜—ξ˜œξ˜”ξ˜™
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜—ξ˜“ξ˜™ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜š
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜›
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜œ
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜”ξ˜“
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜—ξ˜•ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜”
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜›ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜•
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜”ξ˜™ξ˜—ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜–
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜—
'(6&5,37,21
(QGξ˜ƒ5
%DFN
)URQW
(QGξ˜ƒ/
5DLOξ˜ƒ6XSSRUW
$FFHVVξ˜ƒ3DQHO
%UNWξ˜ƒ$QJOHξ˜ƒξ˜–ξ˜•PPξ˜ƒξ˜•ξ˜š[ξ˜—ξ˜š[ξ˜—ξ˜•ξ˜ƒZξ˜’ξ˜ƒ5LY
6FUHZξ˜ƒ(XURξ˜ƒ3K3Qξ˜ƒ1,ξ˜ƒξ˜™ξ˜‘ξ˜–[ξ˜ƒξ˜”ξ˜—ξ˜‘ξ˜˜PP
6FUHZξ˜ƒ0DFKξ˜ƒ+['Fξ˜ƒ1,ξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜›
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
6FUHZξ˜ƒ7DSSξ˜ƒ3K)Oξ˜ƒ=LQFξ˜ƒξ˜†ξ˜›ξ˜ƒ;ξ˜ƒξ˜•ξ˜‘ξ˜“ξ˜“
6LQNξ˜ƒ6QJξ˜ƒ&'(ξ˜–ξ˜”ξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜–ξ˜”ξ˜ƒ:KW
3OEJξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜”ξ˜ƒ$'$
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
3DUWVξ˜ƒ/LVW
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜—ξ˜œξ˜œξ˜”ξ˜”
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜“ξ˜”ξ˜•
ξ˜šξ˜”;;ξ˜ξ˜“ξ˜™ξ˜˜ξ˜™ξ˜”ξ˜–
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜“ξ˜”ξ˜—
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜–ξ˜›ξ˜”ξ˜˜
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜”ξ˜”ξ˜™
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜–ξ˜œξ˜”ξ˜š
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜›
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜”ξ˜™ξ˜—ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜œ
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜—ξ˜•ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜˜ξ˜”ξ˜“
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜œξ˜”ξ˜”
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜—ξ˜“ξ˜™ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜•
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜”ξ˜–
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜—
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜˜ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜˜
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜™
'(6&5,37,21
(QGξ˜ƒ/
(QGξ˜ƒ5
%DFN
)URQW
5DLOξ˜ƒ6XSSRUWξ˜”
$FFHVVξ˜ƒ3DQHO
5DLOξ˜ƒ6XSSRUWξ˜•
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
3OEJξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜”ξ˜ƒ$'$
6FUHZξ˜ƒ7DSSξ˜ƒ3K)Oξ˜ƒ=LQFξ˜ƒξ˜†ξ˜›ξ˜ƒ;ξ˜ƒξ˜•ξ˜‘ξ˜“ξ˜“
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
%UNWξ˜ƒ$QJOHξ˜ƒξ˜–ξ˜•PPξ˜ƒξ˜•ξ˜š[ξ˜—ξ˜š[ξ˜—ξ˜•ξ˜ƒZξ˜’ξ˜ƒ5LY
6FUHZξ˜ƒ(XURξ˜ƒ3K3Qξ˜ƒ1,ξ˜ƒξ˜™ξ˜‘ξ˜–[ξ˜ƒξ˜”ξ˜—ξ˜‘ξ˜˜PP
6FUHZξ˜ƒ0DFKξ˜ƒ+['Fξ˜ƒ1,ξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜›
6FUHZξ˜ƒ&RQQξ˜ƒ+[)Oξ˜ƒ=1ξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
6LQNξ˜ƒ'EOξ˜ƒ''(ξ˜—ξ˜œξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜—ξ˜œξ˜ƒ:KW
TM8360R
Single Wall Vanity
TM8360R – TM8362R
STEP-BY-STEP ASSEMBLY
2#0964-3145
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM8360/TM8362.9/25/18
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM8362R.
BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR BOTH MODELS.
2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT!
Be sure to keep all parts supported during assembly to avoid damage.
Do not over-tighten screws or it will damage the pre-drilled holes;
snug fit is adequate.
HARDWARE / TOOLS INCLUDED
Confirmat Bolt (11)
(Screw Conn HxDc Ni 7mmx50mm)
Flat Head Confirmat Bolt (15)
(Screw Conn HxFl ZN 7mmx50mm)
Bracket (12)
(Brkt Angle 32mm 27x47x42 w/Riv)
Bracket Screw (13)
(Screw Euro PhPn NI 6.3x14.5mm)
Hex Wrench
Access Panel Screw (14)
(Screw Mach HxDc NI 1/4-20x1.58)
Back Screw (10)
(Screw Tapp PhFl Zinc #8x2.00)
(Phillips screwdriver required but not included.)
3DUWVξ˜ƒ/LVW
3$57ξ˜ƒξ˜†47<,7(0
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜—ξ˜œξ˜œξ˜”ξ˜”
ξ˜—ξ˜”;;ξ˜ξ˜”ξ˜˜ξ˜“ξ˜“ξ˜”ξ˜•
ξ˜šξ˜”;;ξ˜ξ˜“ξ˜™ξ˜˜ξ˜™ξ˜”ξ˜–
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜“ξ˜”ξ˜—
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜–ξ˜›ξ˜”ξ˜˜
ξ˜›ξ˜•;;ξ˜ξ˜“ξ˜•ξ˜˜ξ˜”ξ˜”ξ˜™
ξ˜™ξ˜”;;ξ˜ξ˜“ξ˜™ξ˜–ξ˜œξ˜”ξ˜š
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜”ξ˜•ξ˜˜ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜›
ξ˜“ξ˜™ξ˜™ξ˜”ξ˜ξ˜“ξ˜”ξ˜™ξ˜—ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜•ξ˜œ
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜—ξ˜•ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜˜ξ˜”ξ˜“
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜–ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜œξ˜”ξ˜”
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜—ξ˜“ξ˜™ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜•
ξ˜“ξ˜•ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜›ξ˜”ξ˜–
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜–ξ˜šξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜—ξ˜”ξ˜—
ξ˜“ξ˜›ξ˜™ξ˜”ξ˜ξ˜“ξ˜•ξ˜“ξ˜˜ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜˜
ξ˜“ξ˜™ξ˜™ξ˜“ξ˜ξ˜•ξ˜šξ˜“ξ˜œξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜“ξ˜”ξ˜”ξ˜™
'(6&5,37,21
(QGξ˜ƒ/
(QGξ˜ƒ5
%DFN
)URQW
5DLOξ˜ƒ6XSSRUWξ˜”
$FFHVVξ˜ƒ3DQHO
5DLOξ˜ƒ6XSSRUWξ˜•
)DXFξ˜ƒ3((5ξ˜ƒ3ξ˜•ξ˜—ξ˜”/)ξ˜ƒ/DYξ˜ƒξ˜—ξ˜…
3OEJξ˜ƒ6WUDLQHUξ˜ƒ)ODWξ˜ƒ'ξ˜šξ˜“ξ˜ξ˜”ξ˜“ξ˜”ξ˜ƒ$'$
6FUHZξ˜ƒ7DSSξ˜ƒ3K)Oξ˜ƒ=LQFξ˜ƒξ˜†ξ˜›ξ˜ƒ;ξ˜ƒξ˜•ξ˜‘ξ˜“ξ˜“
6FUHZξ˜ƒ&RQQξ˜ƒ+['Fξ˜ƒ1Lξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
%UNWξ˜ƒ$QJOHξ˜ƒξ˜–ξ˜•PPξ˜ƒξ˜•ξ˜š[ξ˜—ξ˜š[ξ˜—ξ˜•ξ˜ƒZξ˜’ξ˜ƒ5LY
6FUHZξ˜ƒ(XURξ˜ƒ3K3Qξ˜ƒ1,ξ˜ƒξ˜™ξ˜‘ξ˜–[ξ˜ƒξ˜”ξ˜—ξ˜‘ξ˜˜PP
6FUHZξ˜ƒ0DFKξ˜ƒ+['Fξ˜ƒ1,ξ˜ƒξ˜”ξ˜’ξ˜—ξ˜ξ˜•ξ˜“[ξ˜”ξ˜‘ξ˜˜ξ˜›
6FUHZξ˜ƒ&RQQξ˜ƒ+[)Oξ˜ƒ=1ξ˜ƒξ˜ƒξ˜ƒξ˜šPP[ξ˜ƒξ˜˜ξ˜“PP
6LQNξ˜ƒ'EOξ˜ƒ''(ξ˜—ξ˜œξ˜•ξ˜•63:ξ˜ƒξ˜•ξ˜”[ξ˜—ξ˜œξ˜ƒ:KW
TM8362R
TM8360R – TM8362R
STEP-BY-STEP ASSEMBLY
3
#0964-3145
Β©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.3594.TM8360/TM8362.9/25/18
Insert dowel on one end of into Rail Support2 (7)
upper hole on face of . Top edges must Back (3)
align. Press firmly into place.
STEP
2
Position on top of assembly, so dowel on Front (4)
Rail Support2 (7) Front aligns with upper hole on
(4). Top edges must align. Press firmly into place.
STEP
3
Secure to with one Front (4) Rail Support2 (7)
Confirmat Bolt (11).
STEP
4
Carefully position and support assembly with
Front (4) tilted down toward floor.
STEP
5
Secure to with Back (3) Rail Support2 (7) Flat
Head Confirmat Bolt (15). This will be referred to
as the in . Set aside. Support Assembly Step 9
NOTE: TM8360R does not have a Rail Support2
or Support Assembly. The Rail Support and
Front are inserted separately into the Ends in
the following Steps.
STEP
6
Lay flat on floor, with side having the Back (3)
most holes facing up.
STEP
1
FOR TM8362R ONLY (STEPS 1-6):
top edges
top edge
top edge
side view


Produktspezifikationen

Marke: Tot Mate
Kategorie: SpΓΌlbecken
Modell: TM8362R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tot Mate TM8362R benΓΆtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten