Toshiba TLP-X200 Bedienungsanleitung

Toshiba Videostrahl TLP-X200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Toshiba TLP-X200 (53 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/53

Before UsingPreparationsOperationsMaintenanceOthers

Network/

USB memory

TLP-X200 (XGA)

TLP-WX200 (WXGA)

DATA PROJECTOR

OWNER’S MANUAL

In the spaces provided below, record the Model and Serial No. located at the bottom of

your projector.

Model No . Serial No.

Retain this information for future reference.

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES

ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

USA only

Handling the cord on this product or cords associated with accessories sold with

this product, will expose you to lead, a chemical known to the State of California

to cause birth defects or other reproductive harm. Wash hands after handling.

USA only

Lamp contains mercury. Disposal of this product may be regulated due to

environmental considerations. For disposal, reuse or recycling information,

please contact your local government or the Electronic Industries Alliance at

www.eiae.org.

MODEL NAME: TLP-X200 / TLP-WX200 USA only

TRADE NAME: DATA PROJECTOR MODEL NAME: TLP-X200 / TLP-WX200

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Before Using

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This unit is fully transistorized and does not contain any parts that can be repaired by the

user.

WARNING: DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE

EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read

the owner's manual carefully, and

follow all the operating and other

instructions.

2. Power Sources

This product should be operated

only from the type of power source

which does not exceed the voltage

range speciﬁed on the rating label

and the power cord.

If you are not sure of the type

of power supply to your home,

consult your product dealer or local

power company.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyesight.

4. Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating. These openings must

not be blocked or covered. Never

block an opening by placing the

product on a bed, sofa, rug or

other similar surface. Do not place

it in a built-in installation such as

a bookcase or rack, unless proper

ventilation is provided.

Produktspezifikationen

Marke:	Toshiba
Kategorie:	Videostrahl
Modell:	TLP-X200
Gewicht:	2100 g
Übertragungstechnik:	Kabelgebunden
Anzahl eingebauter Lautsprecher:	1
Anzahl USB 2.0 Anschlüsse:	1
Kontrastverhältnis:	600:1
Anzahl HDMI-Anschlüsse:	1
Energiebedarf:	AC 100-240 V, 50/60 Hz
RS-232 port:	1
Abmessungen (BxTxH):	293 x 192 x 70 mm
Projektorhelligkeit:	3000 ANSI Lumen
Projektionstechnologie:	LCD
native Auflösung des Projektors:	XGA (1024x768)
Matrix Größe:	0.7 "
Trapezkorrektur, vertikal:	45 °
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	2
Serielle Schnittstelle:	RS-232
Seitenverhältnis:	4:3
Audioanschlüsse:	1
Lebensdauer der Lichtquelle:	2000 h
Lampenleistung:	180 W
Typ der Lichtquelle:	Lampe
Anzahl S-Video-Eingänge:	1
Vertikaler Scanbereich:	50 - 85 Hz
Horizontaler Scanbereich:	15 - 106 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus):	3000 h
Audioausgang:	1