Mitsubishi EX241U Bedienungsanleitung

Mitsubishi Videostrahl EX241U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mitsubishi EX241U (59 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/59

EX321U/EX241U

ENGLISH

DLP™ PROJECTOR

MODEL

EX321U/EX241U

User Manual

This User Manual is important to you.

Please read it before using your projector.

EN-2

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-

lated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric

shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

Use the attached specified power supply cord. If you use another

power supply cord, it may cause interference with radio and television

reception.

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE

PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Pro-

tection of Electronic Computer/Data Processing Equipment, ANSI/

NFPA 75.

The attached power cord is to be used exclusively for this product.

Never use it for other products.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive

2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Direc-

tive".

The electro-magnetic susceptibility has been chosen at a level that

gains proper operation in residential areas, on business and light

industrial premises and on small-scale enterprises, inside as well as

outside of the buildings. All places of operation are characterized by

their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of an EN55022 Class B device.

When using the projector in South Korea:

WARNING

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of a K00022 Class B device.

Please follow WARNING instructions.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT-

LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND

SHALL BE EASILY ACCESSIBLE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

EN-3

ENGLISH

WARNING

• If the projector comes with a lens cap, please note that the lens cap

is for protecting the lens. If you leave the lens cap on the lens with

the projector turned on, it may be deformed because of heat build-

up. Remove the lens cap when you turn on the projector.

• One of power cords for the U.S., EU/Indonesia, U.K., Australia,

South Korea and Argentina is provided appropriately.

• This projector uses the power plug of three-pin grounding type. Do

not remove the grounding pin from the power plug. If the power plug

doesn’t fit your wall outlet, ask an electrician to change the wall out-

let.

• In case that the power cord for the U.S. is provided with this projec-

tor, never connect this cord to any outlet or power supply using other

voltages or frequencies than rated. If you want to use a power sup-

ply using other voltage than rated, prepare an appropriate power

cord separately.

• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

• Do not place any objects on the power cord or do not place the pro-

jector near heat sources to prevent damage to the power cord. If the

power cord should be damaged, contact your dealer for replace-

ment because it may cause fire or electric shock.

• Do not modify or alter the power cord. If the power cord is modified

or altered, it may cause fire or electric shock.

Note: This symbol mark is for EU

countries only.

This symbol mark is according to

the directive 2002/96/EC Article 10

Information for users and Annex

IV, and/or to the directive 2006/66/

EC Article 20 Information for end-

users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumula-

tors, at their end-of-life, should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical sym-

bol means that the battery or accumulator contains a heavy metal at a certain concen-

tration. This will be indicated as follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and

electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local

community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

Produktspezifikationen

Marke:	Mitsubishi
Kategorie:	Videostrahl
Modell:	EX241U
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Breite:	281.9 mm
Tiefe:	91.4 mm
Gewicht:	2500 g
Produktfarbe:	Weiß
Höhe:	228.6 mm
Energiequelle:	AC
RMS-Leistung:	2 W
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Nein
Kopfhörerausgänge:	1
Fernbedienung enthalten:	Nein
Stromverbrauch (Standardbetrieb):	315 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Betriebsanleitung:	Ja
Kontrastverhältnis:	2700:1
Anzahl HDMI-Anschlüsse:	1
Stromverbrauch (Standby):	- W
Geräuschpegel:	34 dB
Analoges Signalformatsystem:	NTSC, NTSC 4.43, PAL, PAL 60, SECAM
RS-232 port:	1
Audioeingang (L, R):	1
Komponenteneingang Video (YPbPr/YCbCr):	1
HDCP:	Nein
Unterstützte Video-Modi:	1080p, 480p, 540p, 576p, 720p
Unterstützte Grafik-Auflösungen:	1024 x 768 (XGA), 1600 x 1200 (UXGA)
3D:	Ja
Full-HD:	Nein
Projektorhelligkeit:	2600 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	XGA (1024x768)
Projektionsflächenkapazität:	40 - 300 "
Projektionsabstand:	1.5 - 11.6 m
Fokus:	Manuell
Anzahl VGA (D-Sub) Anschlüsse:	2
Serielle Schnittstelle:	RS-232
HDMI-Version:	1.2
Lebensdauer der Lichtquelle:	3000 h
Brennweitenbereich:	- mm
Anzahl S-Video-Eingänge:	1
HD-Ready:	Ja
Vertikaler Scanbereich:	48 - 120 Hz
Horizontaler Scanbereich:	31 - 94 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus):	4000 h
Stromeingang:	Ja
Geräuschpegel (Energiesparmodus):	32 dB
Projektionsverhältnis:	1.9 - 2.1:1
3D Ready:	Ja
Abstand der Projektionswand (breit):	1.5 - 11.4 m
Projektionsabstand (Tele):	1.7 - 10.5 m
Punkt-Scan-Frequenz:	170 MHz
Ethernet/LAN:	Ja