Toshiba TL100 Bedienungsanleitung

Toshiba Solid-State-Laufwerk (SSD) TL100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Toshiba TL100 (28 Seiten) in der Kategorie Solid-State-Laufwerk (SSD). Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

Please be sure to check www.ocz.com for the latest ﬁrmware updates.

Note: The following instructions are a general guideline for the SSD installation and should act as a complement

to your system’s owner manual.

SSD HANDLING PRECAUTIONS

· To minimize static electricity, touch a metal surface before handling the SSD.

· Keep the drive away from direct sunlight, moisture, and extreme temperatures.

LAPTOP INSTALLATION

1. Power off the system, disconnect all power cables, and remove the battery.

2. Locate the hard drive access panel; unscrew and remove the access panel.

3. Disconnect and remove the current storage drive from the drive bay

(refer to your system’s user manual)

4. Remove all brackets and connectors from your HDD and install it on the SSD (if necessary).

Note: If a proprietary connector and/or bracket are present on the HDD, carefully remove it and connect it

to the SSD. Systems will vary and these items may or may not be present.

5. Insert the SSD into the drive bay carefully aligning the SSD with the SATA* connectors.

6. Secure the SSD in the drive bay. Reinstall the access panel and insert the battery back into the system.

7. Power on your system to verify a successful installation. For a boot drive, this is signiﬁed by the BIOS

prompting OS installation. For a secondary drive, follow the format instructions below.

Note: If the SSD will be your primary boot drive, please refer to your operating system’s user

manual for further OS installation instructions. If this SSD will be used as a secondary drive, formatting the

drive is required before use.

*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However, connecting a SATA 6Gbit/s

device into a SATA 3Gbit/s connection will result in reduced performance.

2.5-inch SATA 6Gbit/s SSD Manual

ISF-SSD2-SATA3-ML-V4

DESKTOP INSTALLATION

1. Power off the system and disconnect all power cables.

2. Remove the system’s outer panel (refer to your system’s user manual).

3. If your system provides a 2.5-inch drive bay(s), there is no need for a 3.5-inch adapter bracket.

4. If your system does not provide a 2.5-inch drive bay(s), you will need to mount the SSD in a 2.5-inch to

3.5-inch adapter bracket (3.5-inch adapter bracket included with select models).

5. Install the SSD into an available drive bay.

6. Connect one end of both the SATA* data cable and power cable to the SATA connectors on your

motherboard and the remaining ends to your SSD.

7. Reinstall the outer panel and reconnect the power cable to your PC.

8. Power on your system to verify a successful installation.

Note: If the SSD will be your primary boot drive, please refer to your operating system’s user manual

for further OS installation instructions. If this SSD will be used as a secondary drive, formatting the drive is

required before use.

*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However, connecting a SATA 6Gbit/s device

into a SATA 3Gbit/s connection will result in reduced performance.

FORMATTING THE SSD IN WINDOWS

Reformatting the Product may cause all the data stored in the Product to be lost or corrupted. Ensure the

Product contains no necessary data or ﬁles before reformatting.

1a. For Windows® 8.1 and Windows® 10:

· Enter the shortcut key “Windows key + X”.

· Select “Disk Management”.

1b. For Windows® 7:

· Click on the Windows Start Button, right-click “Computer” and select “Manage”. The “Computer

Management” window will pop up.

· On the left-hand menu (under “Storage”) select “Disk Management”.

Note: If a popup window appears asking you to initialize the disk. Click “OK”

2. Right-click the newly “unallocated” disk, then select “New Simple Volume” and follow the on-screen

instructions. Note: No change is needed to default Simple Volume settings.

3. Click “Finish” when prompted.

4. The SSD is now formatted and ready for OS installation.

FAQ

Q: Is TRIM supported on my OCZ Series SSD?

A: Yes, your OCZ Series SSD features TRIM support, but your operating system must also natively support

TRIM for this feature to function properly.

Q: Why does my drive seem to be running slow?

A: Even though your SSD is compatible with previous generations of the SATA interface, it must be attached

to a SATA 6Gbit/s connection for maximum performance.

Q: Where can I ﬁnd the SSD Utility to update ﬁrmware, secure erase, and check drive information?

A: You can download the SSD Utility for your product at http://www.ocz.com/consumer/download

Q: What operating systems are compatible?

A: Windows® 7, Windows® 8.1, Windows ® 10

Linux® Fedora®

21, Mint 17.1, elementary® OS Freya, openSUSE® 13.2, Ubuntu® 14.04, Ubuntu® 14.10

MAC OS X

® 10.9, 10.10, 10.11

CAPACITY CALCULATION

One Gigabyte (1GB) means 10 9 = 1,000,000,000 bytes and One Terabyte(1TB) means 1012

= 1,000,000,000,000

bytes using powers of 10. A computer operating system, however, reports storage capacity using powers of 2

for the deﬁnition of 1GB= 2 30

= 1,073,741,824 bytes and 1TB = 240 = 1,099,511,627,776 bytes, and therefore

shows less storage capacity. Available storage capacity (including examples of various media ﬁles) will vary

based on ﬁle size, formatting, settings, software and operating system and other factors.

CE COMPLIANCE

This product is CE marked in accordance with the requirements of the applicable EU

Directives. Responsible for CE marking is Toshiba Electronics Europe GmbH, Hansaallee

181, 40549 Düsseldorf, Germany.

SAFETY INSTRUCTIONS

· Do not leave SSD within the reach of children and pets

· Do not disassemble or modify the SSD

· In case of overheating, turn off the SSD

Following information is only valid for EU-member States:

DISPOSAL OF PRODUCTS:

This symbol indicates that this product must not be treated as household waste. By

ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling

of this product, please contact your local city ofﬁce, your household waste disposal service

or the shop where you purchased the product.

Following information is only valid for United States:

FCC Class B Information:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

TECHNICAL SUPPORT

Need help?

Please contact us at our technical support page: http://support.ocz.com

For warranty claims, please check: http://ocz.com/support/warranty

WARNING

Produktspezifikationen

Marke:	Toshiba
Kategorie:	Solid-State-Laufwerk (SSD)
Modell:	TL100
Breite:	69.85 mm
Tiefe:	100 mm
Gewicht:	37.5 g
Produktfarbe:	Grey, White
Höhe:	7 mm
Betriebstemperatur:	0 - 70 °C
Zertifizierung:	CE, BSMI, RCM, KCM, UL, RoHS2
Eingebaut:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Unterstützt Mac-Betriebssysteme:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Schnittstelle:	Serial ATA III
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	1500000 h
Komponente für:	PC
Nachhaltigkeitszertifikate:	RoHS
Unterstützte Linux-Betriebssysteme:	Fedora 22, Fedora 23, Linux Mint 17, Ubuntu 14.04
Arbeitsspannung:	5 V
HDD Kapazität:	120 GB
SSD Speicherkapazität:	120 GB
SSD-Formfaktor:	2.5"
Datenübertragungsrate:	6 Gbit/s
Lesegeschwindigkeit:	550 MB/s
Stromverbrauch (Sleep-Modus):	0.01 W
NVMe:	Nein
Übertragungsrate HDD Schnittstelle:	6 Gbit/s
Energieverbrauch (idle):	0.44 W
Stoßfest (in Betrieb):	1500 G
S.M.A.R.T. Unterstützung:	Ja
Suchzeit (Schreiben):	530 ms
Suchzeit (Lesen):	550 ms
Schreibgeschwindigkeit:	530 MB/s
Zufälliges Lesen (4KB):	85000 IOPS
Zufälliges Schreiben (4KB):	80000 IOPS
TBW-Bewertung:	30
Speichertyp:	TLC
Stromverbrauch (durchschnittl.):	1.6 W
Vibrationen in Betrieb:	2.03 G
TRIM-Unterstützung:	Ja
Lebensdauerbewertung (für 3 Jahre):	27 GB/Tag