Edge Boost Cache Bedienungsanleitung

Edge Solid-State-Laufwerk (SSD) Boost Cache

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edge Boost Cache (3 Seiten) in der Kategorie Solid-State-Laufwerk (SSD). Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Version 1012-1.0

Your installation experience will vary depending on the system you install the Cache mSATA SSD into—refer to your system’s user manual while installing.

Before proceeding, ensure you have a hard disk drive installed as your primary (target) drive.

1. Ensure all power sources, including the wall power adapter and battery, are disconnected from the system.

2. Disassemble the computer’s casing and locate an available mSATA drive slot.

3. Install the Boost Cache mSATA SSD in the empty slot.

4. Reassemble the computer to its original state and restore power.

www.EDGEMemory.com/support

CUSTO MER S UPPORT

Need Help?

Quick Start Guide

Download the software from www.EDGEMemory.com/support/registercache

BOOST CACHE mSATA

Help getting started with your EDGE Boost Cache mSATA Solid State Drive

INTRODUCTION

™

Thank you for purchasing the EDGE Boost Cache mSATA Solid State Drive (SSD)! This guide is designed to provide you information necessary to install and use the

SSD and software, as well as some precautions to adhere to.

The included Dataplex Cache Software works in tandem with a standard hard drive and the Cache mSATA SSD. Frequently used “hot” data and applications are cached

to the high-performance Boost Cache mSATA SSD. Infrequently used “cold” data and applications stay on the hard drive. The result is a faster, more efficient

computing experience with improved boot times, application loading, and file browsing.

● A computer with Windows 7 installed on the primary SATA Hard Disk Drive (Target Drive).

● A Boost Cache mSATA SSD installed as a secondary drive (Cache Drive).

● One of the following storage controllers: Microsoft AHCI, Intel RAID, Intel AHCI, AMD RAID, AMD AHCI, Legacy IDE.

SYSTEM REQUIREMENTS

● DO NOT detach your hard drive (Target Drive) or SSD (Cache Drive) while Dataplex is enabled. Doing so may result in data loss or PC damage.

Uninstall Dataplex first before making any hard drive or SSD changes.

● The target drive must be the primary boot drive. Caching of a secondary drive is not supported.

● Only MBR (Master Boot Record) partitions are supported. GPT (GUID Partition Table) partitions are not supported.

● The Windows Reserved System Partition (100MB partition) must be on the same HDD as the Windows installation (C:\Windows folder).

● Multiple Operating Systems are not supported.

● There is no support for target drives >2TB in capacity.

● Only one cache drive is supported in a system.

● Your computer should be connected to the internet while you install or uninstall the Dataplex software.

● There cannot be two identical Boost Cache SSD drives in the system.

● Your Boost Cache SSD cannot be part of a RAID set.

● If after uninstallation of Dataplex, the system is restored to a prior state in which Dataplex was installed, Dataplex will be started in a disabled state.

DATAPLEX SOFTWARE IMPORTANT INFORMATION

● Ensure all power sources, including the wall power adapter and battery, are disconnected from your system before installing

● Do not expose the SSD to extreme temperatures or sunlight

● Do not touch the gold SATA connectors of the SSD

● Be conscious of static electricity—wear a wrist strap while installing the SSD to minimize this

PRECAUTIONS

INSTALLING THE BOOST CACHE SSD

www.EDGEMemory.com/support

CUSTO MER S UPPORT

Need Help?

WARRANTY

EDGE Boost SSDs are backed by a 5-year warranty. When properly installed, EDGE Memory warrants that this product will be free from substantial defects in

material and workmanship for the aforementioned warranty period. For complete warranty details, please visit www.EDGEMemory.com.

BOOST CACHE mSATA

INSTALLING THE DATAPLEX CACHE SOFTWARE

Before installing the Dataplex software, you must have the Target Drive (hard disk drive) installed with Windows running. The Cache Drive (Cache SSD) must be

installed as a clean secondary drive.

WARNING: ALL data stored on the Boost Cache mSATA SSD will be erased during installation. You must have Admin rights to install.

1. Download the Dataplex software at the following web address: . Fill out all requested fields—www.EDGEMemory.com/support/registercache the product key

can be found on the paper insert packaged with the mSATA SSD.

NOTE: After you register/download your Dataplex Software, you will receive a confirmation email containing your product key.

2. Extract the Dataplex software package (.zip), and review the file to ensure compatibility with your system.Limitations.txt

3. Right-click the .install.exe Run as Administrator ﬁle and choose

4. The Dataplex Setup Wizard will appear, click to continue.Next

5. After reading the End-User License Agreement, click the checkbox to accept and then click to continue.Next

6. Enter your Dataplex product key (you can copy and paste your key from the registration confirmation email). Note: You must be connected to the internet for the

remaining steps.

7. Confirm the (hard drive containing Windows) and (your Boost Cache mSATA SSD). Click to continue.Target Drive Cache Drive Next

8. Click to begin the Dataplex software installation.Install

9. After installation is complete, a confirmation message will appear. Click , then you will be prompted to restart your computer.Finish

To verify your installation:

1. Select from the Windows Start Menu.All Programs

2. Locate the folder and click on the folder to expand.Dataplex

3. Select , the status field will show as .Dataplex Status ENABLED

Produktspezifikationen

Marke:	Edge
Kategorie:	Solid-State-Laufwerk (SSD)
Modell:	Boost Cache
Breite:	- mm
Tiefe:	- mm
Höhe:	- mm
Eingebaut:	Ja
Schnittstelle:	Serial ATA III
SSD Speicherkapazität:	60 GB
Datenübertragungsrate:	6 Gbit/s
Lesegeschwindigkeit:	- MB/s
USB:	Ja
Schreibgeschwindigkeit:	- MB/s