Toolland TM82000 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Toolland TM82000 (28 Seiten) in der Kategorie Schraubenmaschine. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
TM82000
EN
CORDLESS DRILL
NL
ACCUBOORMACHINE
FR
PERCEUSE SANS FIL
ES
ATORNILLADOR INALÁMBRICO
DE
AKKU-SCHRAUBER
PT
APARAFUSADORA SEM FIOS
USER MANUAL 3
HANDLEIDING 7
MODE D'EMPLOI 11
MANUAL DEL USUARIO 15
BEDIENUNGSANLEITUNG 19
MANUAL DO UTILIZADOR 23
TM82000
V. 01 15/07/2016 2 ©Velleman nv
TM82000
V. 01 15/07/2016 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Keep this device away from children and unauthorized users.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or
spare parts.
Always disconnect mains power when the device is not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Do not crimp the power cord and protect it against damage. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
Do not use the device when damage to housing or cables is noticed. Do not attempt to service the
device yourself but contact an authorised dealer.
Class II: this device is designed with double insulation.
Always wear eye and ear protection, gloves and a dust mask when using this device.
Work Area
Keep your work area clean and well-lit. Cluttered and dark areas invite accidents.
Do not operate electric devices in explosive atmospheres and in the presence of flammable liquids, gases or dust.
Keep bystanders and children away while operating the device. Distractions can cause you to lose control of
the device.
Electrical Safety
Never modify the plug or power cord in any way. Do not use adapters with earthed devices.
Avoid any body contact with earthed or grounded surfaces such as pipes, radiators, cookers and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose the device to rain or wet conditions. Water entering the device will increase the risk of
electric shock.
When using the device outside, use an extension cable suitable for outside use.
If use of the device in humid locations is unavoidable, connect the device to a power supply protected by an
RCD (Residual Current Differential) device.


Produktspezifikationen

Marke: Toolland
Kategorie: Schraubenmaschine
Modell: TM82000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Toolland TM82000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schraubenmaschine Toolland

Bedienungsanleitung Schraubenmaschine

Neueste Bedienungsanleitung für -Kategorien-