TFA HiTrax Tip Bedienungsanleitung
TFA
Sportuhren
HiTrax Tip
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TFA HiTrax Tip (120 Seiten) in der Kategorie Sportuhren. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/120
1.0 General Guide
Thank you for your purchase. This watch includes 5 functional modes:
Current Time, Heart Rate Alert, Daily Alarm, Chronograph and Timer
Mode.
With this watch, you also get ECG accurate heart rate readings without
the use of a chest strap! How ?
Simply put the watch on you wrist, place two fingers on the sensors
located on the face of the watch, and watch your heart rate display in
the digital window within seconds!
WARNING!
DO NOT use t his Watch for commercial or profes sional
purposes.
Make sure th at you fully un derstand the functions and
limitations of this watch before using it.
This Watch is a supplementary device for measuring heart
rate; it is NOT a substitute for medical devices. You should
periodically compare the heart rate reading acquired with this
watch with the reading from a doctor.
Consult a doctor or trainer before setting your Upper and
Lower heart rate limits.
2.0 Care and Maintenance
Read this manual thoroughly before using the watch.
Press any key to switch on the watch
Do not expose the instrument to extreme temperatures, vibration or
shock
Clean it with a soft damp cloth. Do not use solvents or scouring
agents.
Please contact a specialized dealer for battery change of the watch
( CR2025 3V Lithium battery).
Please do not try to repair the unit. Contact the original point of
purchase. Please let change the battery before complaining. No
guarantee if the instrument is handled or opened improperly.
Please do not dispose of old electronic devices and empty batteries
in household waste. To protect the environment, take them to your
retail store or to appropriate collection sites according to national or
local regulations.
3.0 Designation of the watch
4.0 Button Operation Summary
[mode] Button
Press the button to select one of the 5 functional modes In functional
modes: Press and hold the button to select setting display In any
setting display: Press the button to choose between different settings.
Press and hold the button to exit setting sequence.
[start/stop] Button
In Current Time Mode: press the button to select between the Date
Display and Time Display In Daily Alarm Mode: Press the button to
select between ON and OFF for daily alarm In Chronograph Mode
and Timer Mode: Press the button to start/stop the counting In setting
displays: press the button to scroll through the settings.
[reset] Button
In Daily Alarm Mode: Press the button to select between ON and
OFF for hourly chime In Chronograph Mode (stop-counting): Press
the button to reset to zero display In Timer Mode (stop-counting):
Press the button to reset the timer to target time In setting displays:
press the button to scroll through settings.
[light] Button
In any functional mode/display, press the button once to turn ON the
EL back light for about 3 seconds.
6.0 Current Time mode
Time Display and Date Display
Press the [start/stop] button once to select between the Time
Display and Date Display.
The Date Display will change to Time Display automatically if
NO keystroke has been activated for about 8 seconds.
6.1 Setting the Current Time Mode
To Set the Current Time Mode
To set the current time and date, and their display formats, press
and hold the [mode] button for about 2 seconds to select the setting
display (the second digits will start flashing).
The Setting Sequence
When the seconds digits start to flash, press the [mode] button to
move the flashing following the setting sequence of the adjacent
diagram or press the [start/stop] or [reset] button to reset the second
digits to zero.
If one of the settings (minute, hour, year, month, date) is flashing,
press the [start/stop] or [reset] button to scroll through the setting
(hold the button down to scroll the setting at a faster pace).
When the ‘month-date’ or ‘date-month’ digits is flashing, press the
[start/stop] or [reset] button to switch between month-date (‘m’ icon
appear) and date-month (‘d’ icon appear).
When the ‘12’ or ‘24’ icon is flashing, press the [start/stop] or [reset]
button to switch between ‘12’ (12 hour format) and ‘24’ (24 hour
format).
When the beep ‘on’ or ‘oF’ icon is flashing, press the [start/stop] or
[reset] button to switch between ‘on’ (key tone ON) and ‘oF’ (key
tone OFF).
When the designated setting appears, press and hold the [mode]
button for about 2 seconds to exit the setting sequence. The setting
display will change to Current Time Mode automatically if NO key-
stoke has been activated for about 1 minute.
Produktspezifikationen
Marke: | TFA |
Kategorie: | Sportuhren |
Modell: | HiTrax Tip |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TFA HiTrax Tip benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sportuhren TFA
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Sportuhren
- Sportuhren Crivit
- Sportuhren Beurer
- Sportuhren Ventus
- Sportuhren Inventum
- Sportuhren Polar
- Sportuhren Pyle
- Sportuhren Crane
- Sportuhren Garmin
- Sportuhren Krontaler
- Sportuhren Suunto
- Sportuhren Sigma
- Sportuhren Asics
- Sportuhren Bryton
- Sportuhren CicloSport
- Sportuhren Trelock
- Sportuhren Ematic
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
14 Juli 2024
13 Juli 2024
11 Juli 2024
10 Juli 2024
10 Juli 2024
10 Juli 2024
8 Juli 2024
7 Juli 2024
7 Juli 2024