Teltonika RUTM50 Bedienungsanleitung

Teltonika Router RUTM50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Teltonika RUTM50 (12 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
RUTM50
Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.
DATASHEET // RUTM50
HARDWARE
POWER SOCKET PINOUT
FRONT VIEW
BACK VIEW
2
SIM holders
WAN Ethernet
port
LAN Ethernet
ports
Reset
button
Wi-Fi Band
LEDs
Power
LED
Power socket
SIM needle
WAN type LEDs
Mobile network type
LEDs
Mobile signal strength
indication LEDs
Grounding
screw
Wi-Fi antenna
connectors
Wi-Fi antenna
connectors
USB port
GPS antenna
connector
Mobile MAIN antenna
connector
Mobile MAIN antenna
connector
Mobile MAIN antenna
connector
Mobile MAIN antenna
connector
Power / Red wire
Input / Green wire
Ground / Black wire
Output / White wire
Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.
MOBILE
5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4x4 MIMO) 900, 550Mbps UL (2x2 MIMO); 4G (LTE): DL Cat 19 1.6Gbps (4x4 MIMO), UL
Cat 18 200Mbps
Mobile module
WIRELESS
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail,
SIM idle protection
SIM switch
NETWORK
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routingRouting
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
Network protocols
IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal
strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
Status
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
SMS
Supports sending and reading Unstructured Supplementary Service Data messagesUSSD
Operator black/white list (by country or separate operators)Black/White list
Possibility to use different PDNs for multiple network access and servicesMultiple PDN
Band lock, Used band status displayBand management
When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it,
meaning that no data is used on the card until then
SIM idle protection service
Auto APNAPN
Direct connection (bridge) between mobile ISP and device on LANBridge
Router assigns its mobile WAN IP address to another device on LANPassthrough
Framed routing: support an IP network behind 5G UEFramed routing
802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)Wireless mode
ETHERNET
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverWAN
WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes,
client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
Wi-Fi security
ESSID stealth modeSSID/ESSID
up to 150 simultaneous connectionsWi-Fi users
Once scanned, a user will automatically enter your network without needing to input login informationWireless QR code generator
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement
(802.11k)
Wireless Connectivity Features
Whitelist, blacklistWireless MAC filter
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsVoIP passthrough support
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionConnection monitoring
Port forward, traffic rules, custom rulesFirewall
View all your Firewall statistics, rules, and rule countersFirewall status page
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so onPorts management
Visual representation of your network, showing which devices are connected to which other devicesNetwork topology
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external
landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user manage-
ment, 9 default customisable themes and optionality to upload and download customised hotspot themes
Hotspot
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcardsDHCP
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
QoS / Smart Queue
Management (SQM)
Supported >25 service providers, others can be configured manuallyDDNS
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic FailoverNetwork backup
Balance Internet traffic over multiple WAN connectionsLoad balancing
Possibility to mount remote file system via SSH protocolSSHFS
Initial virtual routing and forwarding (VRF) supportVRF support
FEATURES
4 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossoverLAN
DATASHEET // RUTM50
Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.

Produktspezifikationen

Marke: Teltonika
Kategorie: Router
Modell: RUTM50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Teltonika RUTM50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router Teltonika

Bedienungsanleitung Router

Neueste Bedienungsanleitung für -Kategorien-