TDE Instruments Digalox DPM72-MPPA-DIN Bedienungsanleitung

TDE Instruments Nicht kategorisiert Digalox DPM72-MPPA-DIN

Lesen Sie kostenlos die ๐Ÿ“– deutsche Bedienungsanleitung fรผr TDE Instruments Digalox DPM72-MPPA-DIN (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fรผr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Digaloxยฎ DPM72-MPP/MPPA/MPPV-DIN
Instruction manual (Rev-2023-03)
๎˜๎˜‚๎˜ƒ๎˜„๎˜…๎˜†๎˜‡๎˜ˆ๎˜‰๎˜Š๎˜‹๎˜†๎˜‚๎˜ƒ๎˜„๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜‹๎˜‚๎˜†๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜Œ๎˜ˆ๎˜‚๎˜Ž๎˜‰๎˜๎˜…๎˜๎˜‰๎˜๎˜‘๎˜’๎˜‰๎˜๎˜ƒ๎˜‹๎˜„
Package contents: ๎˜๎˜‹๎˜†๎˜ƒ๎˜„๎˜…๎˜“๎˜”๎˜‰๎˜๎˜•๎˜–๎˜—๎˜˜๎˜™๎˜‰๎˜š๎˜‰๎˜›๎˜‡๎˜Œ๎˜œ๎˜ˆ๎˜๎˜Š๎˜™๎˜‰๎˜˜๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰๎˜Œ๎˜ƒ๎˜‚๎˜‡๎˜ƒ๎˜„๎˜Š๎˜‰๎˜ž๎˜Ÿ๎˜’๎˜‰ ๎˜‰๎˜๎˜Ÿ!
1. Safety instructions
โ€ข"๎˜ˆ๎˜ƒ# ๎˜‰ ๎˜‹๎˜‚๎˜Š๎˜Ž๎˜๎˜‡๎˜๎˜Ž๎˜‹๎˜…๎˜‚ ๎˜‰ ๎˜Œ๎˜ƒ๎˜‚๎˜‡๎˜ƒ๎˜„ ๎˜‰ ๎˜๎˜ƒ๎˜๎˜ˆ๎˜๎˜‡๎˜„๎˜„$ ๎˜‰ %๎˜ˆ๎˜๎˜…๎˜๎˜ˆ ๎˜‰ ๎˜…๎˜œ๎˜ˆ๎˜๎˜ƒ๎˜Ž๎˜‹๎˜‚๎˜† ๎˜‰ ๎˜Ž&๎˜ˆ ๎˜‰ #๎˜ˆ'๎˜‹๎˜๎˜ˆ( ๎˜‰ )๎˜ˆ๎˜ˆ๎˜œ ๎˜‰ ๎˜๎˜…๎˜ ๎˜‰ ๎˜„๎˜ƒ๎˜Ž๎˜ˆ๎˜๎˜‰
๎˜๎˜ˆ๎˜๎˜ˆ๎˜๎˜ˆ๎˜‚๎˜๎˜ˆ*
โ€ข๎˜–๎˜…๎˜‡๎˜‚๎˜Ž๎˜‹๎˜‚๎˜†๎˜‰๎˜ƒ๎˜‚#๎˜‰๎˜‹๎˜‚๎˜Š๎˜Ž๎˜ƒ๎˜„๎˜„๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜๎˜ƒ๎˜๎˜๎˜‹๎˜ˆ#๎˜‰๎˜…๎˜‡๎˜Ž๎˜‰%$๎˜‰๎˜Š๎˜‡๎˜‹๎˜Ž๎˜ƒ%๎˜„$๎˜‰+๎˜‡๎˜ƒ๎˜„๎˜‹๎˜๎˜‹๎˜ˆ#๎˜‰๎˜ƒ๎˜‚#๎˜‰๎˜๎˜…๎˜Œ๎˜œ๎˜ˆ๎˜Ž๎˜ˆ๎˜‚๎˜Ž๎˜‰
๎˜œ๎˜ˆ๎˜๎˜Š๎˜…๎˜‚๎˜Š๎˜‰๎˜…๎˜‚๎˜„$*
โ€ขWhen working on the device hazardous voltages must not be connected to
the device! The terminals J1-J12 are not isolated from the measuring
circuit.
โ€ขThe device must not be used as the only protective device or protective
shutdown.
โ€ข,&๎˜ˆ๎˜‰#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜‹๎˜‚๎˜Ž๎˜ˆ๎˜‚#๎˜ˆ#๎˜‰๎˜Ž๎˜…๎˜‰๎˜œ๎˜๎˜…๎˜Ž๎˜ˆ๎˜๎˜Ž๎˜‰๎˜œ๎˜ˆ๎˜๎˜Š๎˜…๎˜‚๎˜Š๎˜‰๎˜…๎˜๎˜‰๎˜๎˜ƒ๎˜๎˜‹๎˜„๎˜‹๎˜Ž๎˜‹๎˜ˆ๎˜Š๎˜‰๎˜ƒ๎˜†๎˜ƒ๎˜‹๎˜‚๎˜Š๎˜Ž๎˜‰&๎˜ƒ๎˜๎˜Œ*๎˜‰-๎˜œ๎˜ˆ๎˜๎˜‹๎˜๎˜‹๎˜๎˜‰
#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜Š๎˜‰ ๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ ๎˜‰๎˜‡๎˜Š๎˜ˆ#๎˜‰ ๎˜Ž๎˜…๎˜‰ ๎˜†๎˜‡๎˜ƒ๎˜๎˜ƒ๎˜‚๎˜Ž๎˜ˆ๎˜ˆ๎˜‰ ๎˜Š๎˜ƒ๎˜๎˜ˆ๎˜Ž$๎˜‰๎˜ž๎˜œ๎˜๎˜…๎˜Ž๎˜ˆ๎˜๎˜Ž๎˜‹๎˜…๎˜‚ ๎˜‰๎˜๎˜ˆ๎˜„๎˜ƒ$๎˜Š๎˜™๎˜‰ ๎˜๎˜‡๎˜Ž.๎˜…๎˜๎˜๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜™
๎˜ˆ๎˜Ž๎˜*!*
โ€ข0&๎˜ˆ๎˜‚๎˜‰๎˜๎˜…๎˜‚๎˜‚๎˜ˆ๎˜๎˜Ž๎˜‹๎˜‚๎˜†๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Ž๎˜…๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜Ž๎˜ˆ๎˜๎˜Œ๎˜‹๎˜‚๎˜ƒ๎˜„๎˜Š๎˜‰12.13๎˜™๎˜‰๎˜…๎˜‚๎˜„$๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜‡๎˜Š๎˜ˆ#๎˜‰
/&๎˜…๎˜Š๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜…๎˜„๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚๎˜‰'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜‰๎˜ƒ๎˜Ž๎˜‰๎˜„๎˜ˆ๎˜ƒ๎˜Š๎˜Ž๎˜‰๎˜Ž/๎˜‹๎˜๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜Œ๎˜ƒ๎˜“๎˜‹๎˜Œ๎˜‡๎˜Œ๎˜‰๎˜…๎˜๎˜๎˜‡๎˜๎˜๎˜‹๎˜‚๎˜†๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜ˆ๎˜Œ๎˜ˆ๎˜‚๎˜Ž๎˜‰
'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ*๎˜‰4๎˜…๎˜๎˜‰๎˜ˆ๎˜“๎˜ƒ๎˜Œ๎˜œ๎˜„๎˜ˆ๎˜™๎˜‰/&๎˜ˆ๎˜‚๎˜‰๎˜Œ๎˜ˆ๎˜ƒ๎˜Š๎˜‡๎˜๎˜‹๎˜‚๎˜†๎˜‰5678๎˜‰๎˜9๎˜‰๎˜Š/๎˜‹๎˜Ž๎˜&๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜‹๎˜Š๎˜…๎˜„๎˜ƒ๎˜Ž๎˜ˆ#๎˜‰๎˜๎˜…๎˜๎˜‰๎˜ƒ๎˜Ž๎˜‰
๎˜„๎˜ˆ๎˜ƒ๎˜Š๎˜Ž๎˜‰:678*
โ€ข๎˜๎˜…๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜…๎˜œ๎˜ˆ๎˜‚๎˜‰๎˜Ž&๎˜ˆ๎˜‰&๎˜…๎˜‡๎˜Š๎˜‹๎˜‚๎˜†(
โ€ข๎˜๎˜…๎˜‰๎˜‚๎˜…๎˜Ž๎˜‰๎˜‡๎˜Š๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰#๎˜ˆ'๎˜‹๎˜๎˜ˆ๎˜‰๎˜‹๎˜‚๎˜‰๎˜Ž&๎˜ˆ๎˜‰๎˜œ๎˜๎˜ˆ๎˜Š๎˜ˆ๎˜‚๎˜๎˜ˆ๎˜‰๎˜…๎˜๎˜‰๎˜ˆ๎˜“๎˜œ๎˜„๎˜…๎˜Š๎˜‹'๎˜ˆ๎˜‰๎˜…๎˜๎˜‰๎˜๎˜„๎˜ƒ๎˜Œ๎˜Œ๎˜ƒ%๎˜„๎˜ˆ๎˜‰๎˜Š๎˜‡%๎˜Š๎˜Ž๎˜ƒ๎˜‚๎˜๎˜ˆ๎˜Š(
โ€ข๎˜๎˜„๎˜„๎˜‰๎˜๎˜ƒ%๎˜„๎˜ˆ๎˜Š๎˜‰๎˜๎˜ƒ๎˜๎˜$๎˜‹๎˜‚๎˜†๎˜‰&๎˜ƒ;๎˜ƒ๎˜#๎˜…๎˜‡๎˜Š๎˜‰'๎˜…๎˜„๎˜Ž๎˜ƒ๎˜†๎˜ˆ๎˜Š๎˜‰๎˜Œ๎˜‡๎˜Š๎˜Ž๎˜‰%๎˜ˆ๎˜‰๎˜Š๎˜ˆ๎˜๎˜‡๎˜๎˜ˆ#๎˜‰/๎˜‹๎˜Ž&๎˜‰๎˜ˆ๎˜“๎˜Ž๎˜ˆ๎˜๎˜‚๎˜ƒ๎˜„๎˜‰๎˜Š๎˜ˆ๎˜œ๎˜ƒ๎˜๎˜ƒ๎˜Ž๎˜…๎˜๎˜Š*
2. Meaning of symbols
<๎˜ˆ๎˜‚๎˜ˆ๎˜๎˜ƒ๎˜„๎˜‰/๎˜ƒ๎˜๎˜‚๎˜‹๎˜‚๎˜†๎˜‰๎˜Š๎˜‹๎˜†๎˜‚
๎˜ž๎˜๎˜Ž๎˜Ž๎˜ˆ๎˜‚๎˜Ž๎˜‹๎˜…๎˜‚๎˜™๎˜‰๎˜…%๎˜Š๎˜ˆ๎˜'๎˜ˆ๎˜‰๎˜Ž&๎˜ˆ๎˜‰#๎˜…๎˜๎˜‡๎˜Œ๎˜ˆ๎˜‚๎˜Ž๎˜ƒ๎˜Ž๎˜‹๎˜…๎˜‚(!
0๎˜ƒ๎˜๎˜‚๎˜‹๎˜‚๎˜†๎˜‰๎˜…๎˜๎˜‰๎˜ƒ๎˜‚๎˜‰๎˜ˆ๎˜„๎˜ˆ๎˜๎˜Ž๎˜๎˜‹๎˜๎˜ƒ๎˜„๎˜‰&๎˜ƒ;๎˜ƒ๎˜#
..... ..... 1 / 8
3. Intended use
โ€ขMeasurement of current, voltage, power and frequency in the specified measuring
ranges.
โ€ขIndoor use non condensing, non corrosive.
โ€ขMounting on DIN rail or screwing on.
โ€ขFailure to comply with these instructions will void all guarantee and warranty.
4. Description
Depending on type the measurement modes analogue signal (2ร—) 0/2 to 10 V and/or
(2ร—) 0/4 to 20 mA AC/DC are supported. As individually adjustable threshold values
are reached, two galvanically isolated alarm outputs enable the device to perform
switch-on or switch-off operations.
Using the configuration software โ€œDigalox
ยฎ Managerโ€ the device can be configured,
e.g. thresholds for alarm output, hysteresis, and more.
Depending on the model, measured values can be transmitted via XBEE radio
technology or RS485 Modbus interface. In addition, the device features a counting
function with data retention. This enables operating-hours-counters or time-counters
for exceeding and falling below threshold values, as well as single pulse counting
(MPP) or double pulse counting (MPPV). The device can be mounted on DIN rails
as well as on other backgrounds through corresponding holes in the housing.
In the โ€œDownloadsโ€ area of www.digalox.com you can find the latest version of the
instruction manual and the software โ€œDigalox
ยฎ Managerโ€.
----- ----- 2 / 8
5. Product overview
3
2
5
4
1
1 2 optocoupler switch outputs
2 Jumper pins J1โ€“J12
3 Supply voltage input
4 Interface (XBEE / RS485)
5 Measurement inputs
6. Mounting
Hook the device into the top-hat rail from above and then press it at the bottom until
the latch engages.
Alternatively, attach the device with 4 screws.
----- ----- 3 / 8


Produktspezifikationen

Marke: TDE Instruments
Kategorie: Nicht kategorisiert
Modell: Digalox DPM72-MPPA-DIN

Brauchst du Hilfe?

Wenn Sie Hilfe mit TDE Instruments Digalox DPM72-MPPA-DIN benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert TDE Instruments

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fรผr -Kategorien-