Tamron F013 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tamron F013 (3 Seiten) in der Kategorie linse. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
TLM-EDFSIPNCKRIdSv-F013-T/T-1506
SP45mm F/1.8
Di VC USD
(for Nikon, Canon)
SP45mm F/1.8
Di USD
(for Sony *Models without the VC)
Model:
F013
* The Marking is a directive conformity mark of the European Community (EC).
* Das -Zeichen entspricht der EC Norm.
* La marquage est un marquage de conformité à la direcive CEE (CE).
* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).
* Il marchio attesta la conformita alla directtiva della Comunità Europea (CEE).
* 标志表示符合欧州共同体(EC)指标
The EEC Conformity Report applies to the Council
Directive 98/336/EEC, 92/31/EEC, 93/68/EEC and
is used by Tamron Co., Ltd., manufacturer of this
product.
2
3
1
6
7
8
5
4
Nikon
Sony
Canon
＊ F013: This model is Built-in Motor
1211
10
9
12
11
10
9
1211
10
5
5
3
ENGLISH
Thank you for purchasing the Tamron lens as the latest addition to your photographic equipment.
Before using your new lens, please read the contents of this Owner’s Manual thoroughly to
familiarize yourself with your lens and the proper techniques for creating the highest quality
images possible. With proper handling and care, your Tamron lens will give you many years of
photographing beautiful and exciting pictures.
• Explains precautions that help to prevent problems.
• Explains things you should know in addition to basic operations.
NOMENCLATURE (Refer to Fig. , if not specied)
① ② Lens hood Hood attaching alignment mark
③ ④ Hood attaching indicator Filter ring
⑤ ⑥ Hood attaching bayonet ring Focusing ring
⑦ ⑧ Distance scale Distance index
⑨ VC (Vibration Compensation) switch AF/MF switch (Figs. & )⑩
⑪ ⑫ Lens attachment mark Lens mount/Lens mount contacts
SPECIFICATIONS
F013
Focal Length 45 mm
Maximum Aperture F/1.8
Angle of View 51˚21'
Optical Construction 8/10
Minimum Object Distance 0.29 m (11.4'')
Maximum Magnication Ratio 1:3.4
Filter Size ø 67 mm
Length/Overall Length 89.2 mm (3.5'')/97.9 mm (3.9'')*
Maximum Diameter ø 80.4 mm (3.2'')
Weight 520 g (18.3 oz)*
Lens Hood HF012
* values are specications of Nikon products. Length: Distance from the lens front extremity to the
mount surface.
Overall length: Distance from the lens front extremity to the rear projection extremity.
Features and appearance of lenses listed in this owner’s manual are subject to change without
notice.
ATTACHING AND REMOVING THE LENS
How to mount the lens
Removing the rear cap of the lens. Align the Lens attachment mark on the lens barrel with ⑪
its counterpart on the camera mount and insert the lens.
Rotate the lens clockwise until it click-locks. For Nikon models, align the lens attachment mark
with the dot on the camera and rotate the lens counter-clockwise until it click-locks.
How to detach the lens
Pressing the lens release button on the camera down, turn the lens counter-clockwise (in case
of Nikon lens, clockwise), and lift the lens off the camera’s lens mount.
Ensure that the camera is turned off when attaching or removing the lens.
For further details, please read the instruction manual of your camera.
FOCUSING (Autofocus) and using the full-time manual function
In case of a Nikon or Canon camera, switch the AF/MF switch on the lens to AF (Fig. ). In ⑩
case of a Nikon camera with the focus mode selector dial, set the focus mode to S, C or A, and
then set the AF/MF switch ⑩ on the lens to AF. Press the shutter button halfway down while
viewing through the camera’s viewnder, the lens focuses automatically. An in-focus mark will
light when lens focuses on the main subject sharply. Press the shutter button further to
photograph.
In case of a Sony camera, switch the AF/MF switch ⑩ on the lens to AF (Fig. ), and set the focus
mode on the camera to Auto focus (AF). Press the shutter button halfway down while viewing
through the camera’s viewnder, the lens focuses automatically. An in-focus mark will light when
lens focuses on the main subject sharply. Press the shutter button further to photograph.
Using the full-time manual function
F013 is equipped with the full-time manual function.
The full-time manual function is a function that the focus can be ne-tuned by the manual
focus without switching the AF/MF changing switch when taking a picture of auto focus.
How to use the full-time manual function
First, set the focus mode to “AF”.
You can adjust focus manually while turning the focus ring in the shutter button is pressed
lightly.
The distance scale is marked for guidance purposes. The actual focal point may slightly differ ⑦
from the distance marked on the focal length index.
For further details, please read the instruction manual of your camera.
FOCUSING (Manual Focus) (Ref. Figs. & ),
In case of a Nikon or Canon camera, switch the AF/MF switch on the lens to MF (Fig. ). Focus ⑩
manually rotating the focusing ring
⑥ while viewing through the camera’s viewnder (Fig. ).
The main subject in the viewnder will be sharp when the lens is focused correctly.
In case of a Sony camera, switch the AF/MF switch ⑩ on the lens to MF (Fig. ), and set the
focus mode on the camera to Manual focus (MF). Focus manually rotating the focusing ring
⑥
while viewing through the camera’s viewnder (Fig. ). The main subject in the viewnder will be
sharp when the lens is focused correctly.
Even in the MF mode, when turning focusing ring while pressing the shutter button halfway, the focus ⑥
aid function lamp lights up when the picture is in focus.
At innity, make sure the image in the viewnder appears sharp. The innity position is made with certain
allowances to insure proper focus under a variety of conditions.
For further details, please read the instruction manual of your camera.
VC MECHANISM (Ref. Figs. & , ) (Mounted for Nikon and Canon models)
VC (Vibration Compensation) is a mechanism which reduces the image blur caused by hand-held
shooting.
How to use VC mechanism
1) Set the VC switch on.⑨
*When VC is not used, set the switch off.
2) Press the shutter button halfway to verify the effect of the VC.
When the shutter button is pressed down halfway, it takes about 1 second for the VC to
provide a stable image.
The VC can be effective for hand-held shots under the following conditions.
Dimly lit locations
Scenes where ash photography is forbidden
Situations where your footing is uncertain
Taking panning shots of a moving subject
The VC may not be able to give full effect in the following cases:
When a photograph is taken from a fast movimg vehicle
Shooting during the excessive movement of the camera
When taking photographs using a tripod
Turn the VC switch OFF when taking pictures with the bulb setting or during long exposures. If
the VC switch is ON, the VC mechanism may introduce errors.
With the VC mechanism, there are occasions that the image in the viewnder blurs right after the
shutter button is pressed down halfway, but this is not a malfunction.
When the VC is ON, the number of images recordable is reduced due to the power used from the
camera.
When the VC is ON, immediately after the shutter button is pushed halfway down and
approximately 2 seconds after a nger releases the shutter button, the camera will “click”. This
sound is the VC's locking mechanism activating, not a malfunction.
Turn the VC switch OFF when using tripod.
When the lens is removed from the camera while VC is activating, the lens may make clicking sound when
the lens is subjected to a jolt. This is not a malfunction.
The VC activates while the “release” button is pushed halfway down. (It is activated 2 seconds after the
shutter button is released)
VC can be used in AF or MF mode.
LENS HOOD (Ref. Figs. to ),
A bayonet-type lens hood (referred to as “hood” below) is provided as standard equipment. We
recommend shooting with the hood attached whenever possible as the lens hood eliminates stray
light, which is harmful to the picture. However, please be aware of the precautions stated in the
next section when your camera is equipped with a built-in ash.
Attaching the Lens Hood (Ref. Figs. ) &
Align Hood attaching alignment mark on the hood with the corresponding index mark or ② ⑤
the top of the index line of the distance scale on the lens. Press the hood lightly onto the hood
attaching bayonet ring (Fig.
) and then rotate it clockwise to secure (Fig. ). The lens hood
will be secure when the mark is at the top (Fig. ). When attaching the lens hood, hold the
focus and zoom control rings so that they are not rotated unintentionally.
Pay particular attention to align the hood attaching indexes when using zoom lenses including
wide-angle (e.i. 35mm or wider) settings.
Improper attachment of a hood on a wide-angle zoom lens may cause large shadowed areas in
your pictures.
Stowing lens hood on the lens (Ref. Fig. )
1) Reverse the lens hood. Point the lens toward the opening, then align the hood attaching
index ⑤ ③ on the lens with the alignment on the hood attaching indicator .
2) Turn the hood clockwise until the alignment mark (•) is at the top to set it. (Fig.
)
PRECAUTIONS IN SHOOTING
The optical design for Di takes into consideration the various features of digital single reex
cameras. However, due to the conguration of the digital single reex cameras, even when the
autofocus accuracy is within specications, the focal point may be a little forward or behind the
optimum point when shooting with autofocus under some conditions.
The Tamron lenses described here employ an internal focusing (IF) system. Because of the
characteristics of this optical design, the angles of view at distances other than innity are wider
than that of the lenses applying an ordinary focusing system.
When the built-in ash on the camera is used, adverse photographic phenomena such as corner
illumination fall-off or vignetting at the bottom part of the image may be observed, especially in
close-up range. This is due to the inherent limitation of the coverage of the built-in ash, and/or
the relative position of the ash to the edge of the lens barrel or lens hood which causes
shadows on the image. Always use the built-in ash with the hood removed. It is strongly
recommended to use a suitable separate ash unit provided by the camera manufacturer for all
ash photography, even when using the camera with the hood removed. For further details,
please read the “built-in ash” article on the instruction manual of your camera.
Certain camera models may indicate the maximum and minimum aperture values of the lens in
approximate numbers. This is inherent to the design of the camera and not an indication of an
error.
Using with a mirrorless interchangeable-lens camera will not be guaranteed.
TO ENSURE LONG-TERM SATISFACTION
Avoid touching the glass element surface. Use a photographic lens cloth or blower to remove
dust from the lens element surface. When not using the lens, always place a lens cap on it for
protection.
Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove ngerprints or
dirt on the glass lens surface with a rotary motion from the center to the edge.
Use a silicon cloth to clean your lens barrel only.
Mildew is an enemy of your lens. Clean the lens after shooting near water or in any humid place.
Store your lens in a clean, cool and dry place. When storing the lens in an lens case, store it with
commercially available drying agent such as silicagel, and change the agent occasionally. If you
nd mildew on your lens, consult an authorized repair shop or nearby photographic store.
Do not touch the lens-camera interface contacts since dust, dirt and/or stains may cause a
contact failure between the lens and camera.
When using your equipment [camera(s) and lens(es)] in an environment where the temperature
changes from one extreme to the other, make sure to put your equipment temporarily in a case
or a plastic bag for a length of time in order for the equipment to go through a gradual
temperature shift. This will reduce potential equipment trouble.
■How to Avoid Camera Shake
When using the lens in the telephoto focal range, please be careful with the
camera shake. To reduce image blur, turn the VC (Vibration Compensation)
switch on.
To reduce image blur without using the VC function, follow the steps below.
To avoid camera shake, for the digital cameras, use an ISO setting of higher
numbers and for the lm cameras, use the lm with high ISO numbers to
obtain higher shutter speed. Using a tripod or monopod is also effective.
When hand-holding the camera to take pictures, stand still, with legs
slightly apart, hold your elbows in rmly against your chest, and hold the
camera rmly against your face. If possible, lean against something to
steady yourself or place the camera on something to secure the hold.
Especially when hand-holding your camera, you will be steadier if you
hold your breath, while you press the shutter button gently and rmly.
■Using camera’s built-in ash
When using the camera’s built-in ash, please be aware that the lens hood
or lens barrel may block the light to cause vignetting on the image. When
using the camera’s build-in ash, do not use a lens hood. Even without
a lens hood, vignetting (arch shaped shadow) may appear if the light is
blocked by the lens barrel, so it is advisable to use an optical ash unit (hot
shoe or handle-mount type). The conditions; such as, the focal length and
focusing distance cause the vignetting vary depending on the camera. It
is recommended to test for vignetting at each focal length and focusing
distance.
Suggestions for Better Pictures with Tamron Zoom Lenses
For safe operation be sure to carefully read the manual and the
following cautions before using. After reading them, store them
in a place where they can easily be reviewed whenever needed.
In this manual, caution instructions are divided into the
following two categories:
WARNING
This indicates instructions which if not heeded could lead to
death or serious injury.
CAUTION
This indicates instructions which if not heeded could lead to
bodily injury or physical damage.
WARNING
(1) Do not look directly at the sun through the lens. Doing so
could result in blindness.
(2) Do not leave the lens within the reach of young children.
The lens may fall and injure the child, and the strap may get
wrapped around the child’s neck, resulting in suffocation.
CAUTION
(1) Do not leave the lens in places exposed to direct sunlight.
The light reflected off the lens may focus on a nearby
object, and cause a fire. Place the lens cap on the lens
whenever it is not in use.
Cautions when Using Tamron Lenses
(2) When mounting the lens on the camera, make sure the lens
and camera are properly set and securely locked.
The lens may get stuck if it is not properly mounted, and if
it is not securely locked, it may fall off, damaging the lens
or camera or causing bodily injury.
(3) Do not modify or alter the lens.
Doing so may result in damage to the lens or camera.
(4) Mount the lens hood when taking photographs in order to
eliminate harmful light rays.
* The hood cannot be mounted when certain filters are
installed.
* Remove the hood if it causes shadows at the edges of the
image when using a flash.
(5) Do not place excessive loads on the lens when it is mounted
on the camera. Such loads may damage the mount section
on the lens and the camera. Large lenses tend to place a
strong load on the mount section. Always hold the lens
when operating and moving the camera.
(6) The focus ring turns during the auto focus operation. Do not
keep the focus ring from turning. Also, do not forcibly turn
the focus ring by hand when in the auto focus mode.
Doing so may damage the lens or the interior of the camera.
(7) Do not use the lens except for the purpose of
photographing.
Using Camera’s Built-in Flash
Photographing area
Shadow cast by lens hood and lens barrel
Flash illuminated area
Produktspezifikationen
| Marke: | Tamron |
| Kategorie: | linse |
| Modell: | F013 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Tamron F013 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung linse Tamron
1 Oktober 2024
Tamron SP 150-600mm f/5-6.3 Di VC USD G2 Bedienungsanleitung
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
Bedienungsanleitung linse
- linse Samsung
- linse Gigabyte
- linse Sony
- linse Panasonic
- linse Gaggenau
- linse Canon
- linse Optoma
- linse Olympus
- linse MSI
- linse Fujifilm
- linse Nikon
- linse Sigma
- linse Kodak
- linse Leica
- linse Pentax
- linse Zeiss
- linse Lensbaby
- linse Godox
- linse FLIR
- linse Vivitar
- linse Vello
- linse Cambo
- linse Hanwha
- linse Axis
- linse Aputure
- linse Tokina
- linse Laowa
- linse COLBOR
- linse Accsoon
- linse Carl Zeiss
- linse Computar
- linse Irix
- linse DZOFilm
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
9 Oktober 2024
8 Oktober 2024
8 Oktober 2024
8 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
2 Oktober 2024