Synco P2T Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Synco P2T (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.
Microphone P2T User Manual
Caring For Your SYNCO Product
Package List
Product Instruction
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
TX Transmitter x2
RX Receiver (Type-C
Connector) x1 Wireless Charging Case x1
Charging Cable x1
Type-C to 3.5mm Adapter x1
TX Transmitter RX Receiver Wireless Charging Case
â‘  Power
â‘¡ Working Indicators
â‘¢ Built-in Mic
â‘£ Contacts
⑤ Pocket Clip
â‘  Vocal Eó½—ˆects/ Mono/Stereo
â‘¡ Type-C Port
â‘¢ Working Indicators
â‘£ Connector
⑤ Contacts
â‘  Pairing/ Power Prompt
â‘¡ Type-C Port
â‘¢ Working Indicators
â‘£ Contacts
Indicator — Transmitter (Double press the Power button to turn o󽗈 light e󽗈ect)
System unpaired
Charging, and then turns oó½—ˆ when fully charge
System paired, normal working
Low battery
Flash concurrently
Single light keeps on (light eó½—ˆect oó½—ˆ)
Single light keeps on (in the case)
Illuminate sequentially(light eó½—ˆect on)
Single light ó½—Šashes
Working
Indicators(White
Light)
Working
Indicators(Red Light)
TX Transmitter RX Receiver Wireless Charging Case
Indicator — Receiver
Indicator — Wireless Charging Case
Pairing
System unpaired
Stereo mode (Only original is supported)
System paired
Mono mode-Original sound
Mono mode-Vocal eó½—ˆects on
Illuminate sequentially
Flash concurrently
Single light keeps on & Illuminate sequentially
Single light keeps on & Illuminate sequentially
two-way
Illuminate sequentially
Single light ó½—Šashes twice & Illuminate sequentially
Working
Indicators(White Light)
Working
Indicators
(White
Light)
Operations
1. Usage
2. Pairing
3. Charging
â‘  Tap on the right side of charging case to pop out the drawer
â‘¡ Take the TX and RX out
â‘¢ TX should boot automatically as it leaved the case, and switch itself oó½—ˆ automatically
when returning to the case.
(Forcible switch: Long press the Power button on TX for 3 seconds)
â‘£ RX should boot automatically as it is plugged into smartphone
① Place the TX and RX in the case with their contacts are connected with the case’s
â‘¡ Long press the Pairing button on the case for 3 seconds with the drawer open
â‘¢ The indicators on the TX and RX should light up and illuminate sequentially when
pairing is successful
Note: The transmitter will automatically switch oó½—ˆ if it is unpaired or disconnected for 5
minutes.
Charge the TX: Place the TX in the case with contacts connected with the case’s.
Charge the case: Connect the case with power supply via the charging cable.
Long press for 3 seconds
4. Check the power
5. Use vocal eó½—ˆects
TX: Short press the Power button, the indicators will light up according to remain power
for 5 seconds
Charging Case: Short press the Power Prompt button, the indicators will light up
according to remain power for 5 seconds
Short press the Vocal Eó½—ˆects button on the receiver to switch sound eó½—ˆects: Original >> Studio FX >> KTV FX >> Voice
Amplió½—‰cation >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.
Default eó½—ˆect: Original.
Note: The vocal eó½—ˆect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal eó½—ˆects are
unavailable.
6. Mono/ Stereo
Mono-Original
Mono-Other vocal eó½—ˆects
Mono-Original
Long press the Mono/Stereo button on the RX once
Long press the Mono/Stereo button on the RX once
Long press the Mono/Stereo button on the RX once
Stereo
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
WARRANTY CERTIFICATE
USER INFORMATION
SALES INFORMATION
REPAIR RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us via Email:
support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
TX Transmitter
RX Receiver
Speció½—‰cations
Wireless Transmission
RF Frequency Band
Frequency Response
Working Distance
Sampling Rate
Bit Depth
Sensitivity
SNR
RF Output Power
Battery Type
Battery Charging Time
Battery Life
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Digital 2.4GHz
2400-2483.5MHz
20Hz-20KHz
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
-26dB
>75dB
10dB
Built-in Lithium Battery, 120mAh
1.5H
5H
49x19x19 (mm)
ABS
10g
Digital 2.4GHz
2400-2483.5MHz
Working Distance
Sampling Rate
Bit Depth
Antenna
Monitoring
Connector
Power Input
Dimensions
Material
Weight
492ft/150m(LOS area); 164ft/50m(NLOS area)
48KHz
16Bit
Built-in
3.5mm In-Ear Monitoring
Type-C Output
Type-C
49x30x9 (mm)
ABS
5g
Wireless Charging Case
Battery Type
Battery Charging Time
Charging Port
Power Requirements
Dimensions
Weight
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its operation speció½—‰cation
Artió½—‰cial damage, e.g. crash, squeeze, scratch, or soaking
Modió½—‰cations to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of
element or circuit, label alteration
The code on product is inconsistent with that of warranty certió½—‰cate, or the code on the product or warranty certió½—‰cate
is altered or torn oó½—ˆ
All consumable accessory attached to a product, like cable, wind muó½—ˆ, battery
Faults as a result of force majeure, such as ó½—‰re, ó½—Šood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can
always contact SYNCO’s customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certió½—‰cate as proof of purchase. If any of these documents is missing,
only sales return or chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under
normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to limited warranty service. The warranty period begins on the date of 12-month
purchase of brand new, unused products by the ó½—‰rst end-user.
Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the
defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty
Built-in Lithium Battery, 700mAh
2H
Type-C Port
5V 2A
70x68x38mm
87.5g
8. In-Ear monitoring
Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to real-
time monitor mic recording and device’s backgrounding.
Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.
7. Charging phone device
Plug your phone charging cable into the Type-C Port on the receiver.


Produktspezifikationen

Marke: Synco
Kategorie: Nicht kategorisiert
Modell: P2T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Synco P2T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Synco

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-