Switel Vita SOS CT8 Bedienungsanleitung

Switel Nicht kategorisiert Vita SOS CT8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Switel Vita SOS CT8 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Description

The SWITEL Vita SOS CT8 is an emergency call device with built-in fall detection and

GPS module. The connection is established via the mobile network. Setting and

monitoring are done via a previously defined smartphone or tablet (Android or iOS).

The SOS key and 2 additional direct call buttons allow the user to connect to the

preset numbers in a case of emergency.

In the event of a user’s fall, a notification SMS is sent.

The GPS module allows a location determination of the device. In addition, an area

can be defined in which the person is allowed to stay (Geofence). When he/she leaves

this area, a message will be sent and an alarm tone will sound on the Vita SOS CT8.

Safety Information

General

• Use only manufacturer-approved cables and chargers, as this may damage the

built-in Li-Ion battery and the entire device. In the worst case, a fire may occur.

• Avoid high temperatures above 60 ° C. These can be reached, e. g. when the device

is in a car in the blazing sun.

• Ensure that the power outlet (charging station) is always accessible at all times in

order to be able to disconnect the device quickly from the mains.

• Repairs to this device may only be carried out by qualified service personnel.

Pacemaker

• A distance of at least 20 cm should always be maintained for implanted heart

pacemakers in order to avoid possible disturbances.

• Do not carry the mobile device in the chest pocket.

• When talking, hold the mobile device at the ear opposite the pacemaker.

• The mobile device must be switched off immediately if you feel or suspect any

impairments.

Emergency calls

Mobile devices use radio signals, the mobile telephone network, the fixed network and

user-programmed functions. This means that a connection can not be guaranteed

under all circumstances. Therefore, never rely on a mobile phone only when very

important calls, Eg in medical emergencies.

Note: It is forbidden to enter a public emergency number such as police, fire and

rescue control centre. It is a purely "private" emergency call.

Package contains:

1 3G Mobile Communicator

1 Lanyard cord

1 Belt clip

1 Charger with USB port

1 USB cable

1 Power adapter

1 Screw driver

IMPORTANT

Before operating the device, please download the APP from either Google play

for Android version (Android 4.1 or higher required) or from Appstore for iOS

version (iOS 8 or higher required). The APP is under SWITEL name. Also save

the Vita SOS CT8 phone number in the contacts of your mobile device.

LEDS indication:

Top GREEN LED

• Will light when the device is in use.

Top RED LED

• Will light when the device in charging and when low battery.

Side BLUE LED

• Will flash fast when there is no connection to the network.

• Will flash slow when the device connected to the network.

Front RED LEDS (3x LEDS)

• Will flash slow (every 5 sec) is standby (sleep mode).

• Will flash in a circle in incoming call.

• Will light steady when in use.

Charger RED LED

• Will light once the power supply insert to the charger socket on to the wall.

Headset socket

The headset socket is not activated! Please DO NOT try to remove the silicon

headset, it is glued.

Before ﬁrst use:

(make sure the device is OFF)

Charge your Vita SOS for at least 12 hours before first use.

1. Open the 4 small screws on the back side door and lift the back door

2. Lift the SIM card metal house by unlocking it (push to the left side).

3. Insert the SIM card: (Using MICRO SIM card type). SIM PIN Code must be

deactivated!

4. Replace the SIM card holder and lock it back.

5. Close the back side door.

Opening the device and making the security

pairing to your smart phone or tablet

1. Press & hold both SOS front button and the power button (the side button)

for 2 seconds and then release.

2. The front LED starts flashing and you will hear a voice announcement with the

device Firm Ware number. After this announcement, the front SOS button and the

top green LED will flash.

3. Then wait till the device connect to the GSM network: you will hear a spoken

message.

4. : Open the APP, tap "Add device" -> "Search" and select the number of theAndroid

Vita SOS CT8 from your contacts. A SMS with the content "Go Conecto" is sent

automatically.

iOS: Use your mobile device to send a SMS with the content "Go Conecto" to the

number of the Vita SOS CT8.

5. After the Go Conecto message is being sent, you will hear your mobile phone

number announcement and you will get text SMS message back to your smart

phone for the conﬁrmation and successful security paring: (+Go Conecto with your

mobile phone number). At this moment all the LEDS will turn off and the device is

ready to use.

Tap "Switch device" and check whether the Vita SOS CT8 is activated ( is green).

If this is not the case, tap so that it becomes green.

6. Only your mobile phone that makes the paring to the device can control and

monitor it, if you want other devices to control and monitor the device, you must

insert their numbers to the SOS numbers (PHONE2-7) and or to the M1-2 direct

memories (your mobile number automatically inside SOS 1 and SOS 8 (PHONE 1

and PHONE 8).

Remarks:

• If you open the device BEFORE inserting the SIM card, the a voice will be heard:

“NO SIM CARD”.

• If you insert the SIM card when the device is OPEN, please turn the device OFF

and ON before use.

• A blue led on the side power button will flash every several seconds, it is the

connection indication to the cellular network

• The 3 front LEDs will flash every 5 seconds, indication that the device is ON and

operational.

• If you want to hear the connection to the network, a single press on the side power

button will trigger the voice announcement: Device is connected.

Switching the device on and off:

• To switch on the device: Press and hold the side button for 2-3 seconds till the blue

LED light. The blue LED will start blinking fast searching for the network. Once the

device connected OK to the network, the blue LED will flash slowly (normally every

5-10 seconds.

• To switch off the device, press and hold the side button for 2-3 seconds and

release, wait for 6 seconds and the device will turn off following with vibration.

Activate the voice command

(for device connection status)

When the device is ON, by single press on the side button, a voice command will be

heard announcing the device status.

• The voice announcement support several languages (please refer to the APP

languages support).

Additional functions

Checking the device is OK

When the device is OFF (close), by single press on the side

button, the device LEDS will flash 1 time.

Low battery:

1. When the battery of the device in low capacity, a voice announcement will be heard

from the device to charge the unit (please select the language from the APP).

2. Once the low battery start, it will also send automatic SMS message to a pre

registered number announcing the device low battery.

3. The low battery announcement will be heard every 5min for 60min before the

device will turn OFF, therefore please make sure to charge the device once the low

battery announcement start.

Using the APP

Start the APP. Ensure that the mobile number of the Vita SOS CT8 is stored in the

phonebook / contacts of your mobile phone before you start the APP.

The main screen

The features in detail

Tap Set within the functions to make the settings. Each setting is sent via SMS to the

Vita SOS CT8. You can use to check the current settings.Get

SOS number

1. You can insert up to 8 SOS numbers (PHONE 1-8).

2. The SOS numbers will dial in 3x loop (each number will dial 3 times if the line is

busy or no answer).

3. The called party will hear a voice announcement to press 5 to conﬁrm the SOS call.

If the call party will not press 5, the call will disconnect in 30 seconds and will dial

again the same number (up to 3 times) and then will go to the next SOS number (if

programmed).

4. Once the called party press 5, the 2-Way Voice connection will be open immediately

with the device.

5. Once an SOS call triggered, the call party will receive automatically SOS message

and the device GPS location by direct link to Google map.

6. To make SOS call from the device, single press on the SOS key, it will follow with

SOS dialing sound up to 4 seconds from the SOS activation. After approx. 5

seconds the emergency call procedure will be started.

Adding new devices to the APP

Add device on the APP

and switching

between devices

in the APP

The device in use

Direct press

for the device

GPS location

All the main

features in

the APP

By pressing

each one,

you will enter

to the screen

of the feature

Direct call

to the device

Direct call

keys

M1/M2

Microphone

On/Off button

SOS (emergency) button

Vita SOS CT8

3G Mobile Communicator and Tracker

ENGLISH

User Guide

Please read this operating instruction manual

thoroughly and keep it for further use.

7. To cancel SOS call, press & hold the SOS key for approx. 3

seconds, till cancel sound will be heard (then remove your

ﬁnger from the SOS key).

Direct memories (M1 – M2)

1. You can store 2 direct numbers.

2. To make a call, press on M1 or M2 briefly.

3. To cancel M1-M2 call, press the button again briefly.

4. Dialing and cancelling a call will follow with M1-M2 sounds.

SOS message (SMS)

1. You can write your own SOS message (up to 5 different

messages).

2. The SOS message will be send once the SOS is triggered and

to the number/s marked.

Ring & Tone

1. The device equipped with different scene option, different

melodies and volumes.

2. By pressing the ring type you can also hear it before selecting

it.

GPS

1. Once SOS is triggered, the GPS will open automatically and

will send the device location (GPS operate in open sky).

2. The location will be send in Google map link with the date

and time.

IMPORTANT: in Android version GPS in GET works different

to iOS. Once pressing the Find Location on the main screen

you will be directed to the GPS GET area. Please wait up to

60 sec and the map will change with the location of the

device. If you are in GPS screen, single press on GET and you

will get the device location (up to 60 sec).

Low battery

1. The device equipped with Voice IC, allowing the user to hear

a low battery announcement in his language.

2. User may also insert dedicated number that will be dialed

once the device in low battery capacity.

3. In Android APP, you can get the battery percentage on the

APP. Click GET and wait up to 60 sec before the device

battery capacity (%) will appear on the screen.

Fall detection

1. Fall detection default setting is OFF.

2. Fall detection feature detect your fall in fast movement and

impact.

3. Once a fall detected, the device will make alarm sound for 10

seconds before dialing the SOS number/s. The user can still

cancel the alarm if it is not needed.

4. In the fall detection you have 3 sensitivities: LOW, NORMAL

and HIGH. Please select the sensitivity level required.

5. If you want the device to send also a text message once a

fall is detected, please insert the dedicated phone number.

Once a fall is detected the device will send automatically a

text message announcing the fall.

By using the fall detection feature, it is under the user full

responsibility.

Auto answer

1. You may open automatically the device from a distance after

2 rings.

2. ONLY the number registered (programmed) in the APP SOS

numbers or M1-M2 direct memories can open the device

from a distance. To enable this feature, please make sure

that the Auto Answer is set to Enable (marked in RED color).

Periodic device check

1. When periodic device check is set to enable and with levels

1-7, the device will send automatically a text message to the

pre registered number “Device is OK”. If you set 1 it will send

message approx every 6hrs.

Language

1. The device supports several languages. List of languages

shown in the APP.

2. The languages are for the voice activation in SOS mode, for

Device connectivity status and for device low battery user

alert.

Adding more devices Vita SOS CT8

1. Press ADD Device on main screen.

2. Press SEARCH for device number on your phone book

memories.

3. Once the device number appear click on it. After selecting

the device number press Add.

4. Please note that unlimited devices can be add to the APP’s 5.

After adding the device, go back in the menu to the main

screen and select . Now you will enter to theSwitch Device

screen with all the devices added to your APP. By clicking on

the right FINGER near the device you want to monitor.

The ﬁnger will turn to GREEN color, indicating that this

device in control now.

6. Now go back in the menu to the main screen. The name of

the device will appear on the main screen on the left side (as

circle below in RED color).

7. To delete a device from your APP, press the X on the right

side to the FINGER. A message will appear: Device Deleted

OK and the device name will removed.

Technical data

GSM band 3G-WCDMA

Protection class IP65 (dust- and splash-protected)

Standby approx. 68 hours (3 days) /

depending on the mobile phone net

Talk time approx. 3 hours

SAR value 1,244 W/kg

Battery 500 mAh (firmly installed)

Power adapter 100 - 240 V / 0,2 A / 50/60 Hz

5,0 V / 500 mA

Disposal

In order to dispose of your device, take it to a collection

point provided by your local public waste authorities (e.g.

recycling centre). According to laws on the disposal of

electronic and electrical devices, owners are obliged to

dispose of old electronic and electrical devices in a

separate waste container. The adjacent symbol indicates

that the device must not be disposed of in normal domestic

waste! Batteries represent a hazard to health and the

environment! Never open, damage or swallow batteries or

allow them to pollute the environment. They may contain

toxic, ecologically hazardous heavy metals. You are legally

obliged to dispose of power packs and batteries at the

point of sale or in the corresponding containers provided at

collection points provided by local public waste

authorities. Disposal is free of charge. The adjacent

symbols indicate that the batteries must not be disposed

of in normal domestic waste and must be brought to

collection points provided by local public waste

authorities. Packaging materials must be disposed of

according to local regulations.

Declaration of conformity

This device fulfils the requirements stipulated in the EU

directive:

2014/53/EU. Conformity with the above mentioned directive is

confirmed by the CE symbol on the device. To view the

complete Declaration of Conformity, please refer to the free

download available on our website www.switel.com.

Telgo AG, Rte. D’Englisberg 11, 1763 Granges-Paccot,

Switzerland

Guarantee

SWITEL equipment is produced and tested according to the

latest production methods. The implementation of carefully

chosen materials and highly developed technologies ensure

trouble free functioning and a long service life. The terms of the

guarantee do not apply to the rechargeable batteries or power

packs used in the products. The period of guarantee is 24

months from the date of purchase. All deficiencies resulting

from material of production faults which occur during the

period of guarantee will be eliminated free of charge. Rights to

claims under the terms of guarantee are annulled following

intervention by the purchaser or third parties. Damage caused

as a result of improper handling or operation, incorrect

positioning or storing, improper connection or installation, Acts

of God or other external influence are not covered by the terms

of guarantee. In the case of complaints, we reserve the right to

repair or replace defect parts or provide a replacement device.

Replacement parts or devices become our property. Rights to

compensation in the case of damage are excluded where there

is no evidence or intent or gross negligence by the

manufacturer. If your equipment shows signs of defect during

the period of guarantee, please return to the sales outlet in

which you purchased the SWITEL equipment together with the

purchase receipt. All rights to claims under the terms of

guarantee in accordance with this agreement must be asserted

exclusively with regard to your sales outlet. Two years after the

purchase of our products, claims under the terms of guarantee

can no longer be asserted.

In the case of technical questions, please use the service form

on our website: http://www.switel.com/en/product-

information-technical-support/

Set

Press key to switch between

enable and disable. Once it is

set to enable, the GPS will be

ON all the time.

Please note that GPS open

(enabled) reduce the battery

time much.

When GEO FENCE enable,

you can deﬁne the border for

the device allowed in radius.

To deﬁne the radius, press on

the map (IOS single press

and Android long press).

Select the also the range (up

to 1000 meter). You can also

add a number and once the

device cross the deﬁned

border, the device will make

alarm sound and send text

message “Device Geo Fence

Alert!” to the set number.

You can set the auto report

GPS. Click for enable. Then

select the timing for the

report (5-240min).

Set

You may select / mark the

ring scene of the device

scene, ring type (8 different

ring types available) and

device volume (up to level 5).

Set

Move the cross to enable.

Insert the number to send

text and dialing to. Press SET

to store. Deﬁne the time

(between 1 - 7 days).

Set

You may select fall detection

enable. Once fall is detected,

the device will make alarm

sound for 10 seconds

(allowing the user to cancel

the SOS call).

You may add a number. Once

a fall is detected this number

will get a automatic text

message announcing the fall!

You may select the sensitivity

of the fall between Low,

Normal and High).

Set

Mark your language.

The language selected will be

change in the APP and the

voice prompt announcements.

Set

When auto answer enable,

the device will be open for

conversation after 2 rings

(ONLY for the SOS numbers

set!) “white numbers”.

Set

You may select low battery

enable.The device will

announce to the user when

the battery in low

capacity.You may insert a

number; once the device in

low battery stage and not

charged, the device will send

automatically text message to

the set number with a low

battery alert!

V1-0 / 08.2017

Set

Message 1 empty bar and

insert the text message using

your keyboard.

Marked the SOS numbers you

want the text message to be

send to… Press Set to save.

Set

Press M1 bar to insert the

number, using the number

keys. Press Set to save.

Set

Press PHONE1 empty bar and

insert the number using the

number keys.

Press Set to store.

Produktspezifikationen

Marke:	Switel
Kategorie:	Nicht kategorisiert
Modell:	Vita SOS CT8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Switel Vita SOS CT8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Switel

Switel DC6001 Bedienungsanleitung

18 August 2024

Switel MAPA M 270 Bedienungsanleitung

16 August 2024

Switel WTF 777CC Bedienungsanleitung

16 August 2024

Switel DCT 64072 CP Combo Bedienungsanleitung

16 August 2024

Switel Dragon S 5000 D Bedienungsanleitung

13 August 2024

Switel M 17D Bedienungsanleitung

13 August 2024

Switel DC 60012 Combo Bedienungsanleitung

13 August 2024

Switel DC59071 Bedienungsanleitung

12 August 2024

Switel VICTORY S 4700 D Bedienungsanleitung

12 August 2024

Switel Vita TV-L2BT Bedienungsanleitung

11 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024