SwitchBot Lock Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SwitchBot Lock (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2

A smartphone or tablet with Bluetooth 4.2
or above.
Download the SwitchBot app on App Store
or Google Play Store.
Open SwitchBot app and register for a
SwitchBot account or sign in directly if you
have an account.
(Optional) If you need to control SwitchBot
Lock remotely, receive notifications or use
third-party services, you must first set up
SwitchBot Hub Mini.
Cross head screwdriver (included in the
package).
Wet wipe (included in the package).
Preparation
Keep the device away from humid or hot
environments, water and fire sources.
This product is a precision-based electronic
product. Please avoid applying physical
damages.
Do not attempt to disassemble, repair, or
modify the device.
Do not use the device where wireless devices
are not allowed.
Safety Information
SwitchBot Lock
Main Body
(Batteries included)
SwitchBot Tag
Spare Double
Sided Tape
Thumbturn
Adaptor
PH1 Cross Head
Screwdriver

User Manual
Lock This product has a one-year warranty which
begins from the date of purchase. The following
situations do not fit the Return and Refund
Policy.
Intended damage or abuse.
Inappropriate storage (damages caused by
dropping or soaking in water).
Modify or repair of product.
Natural wearing of product.
Natural disasters.
Return and Refund Policy
Setup and Troubleshooting:
support.switch-bot.com
Support Email:
support@wondertechlabs.com
Feedback: If you have any concern or problem
when using our product, please kindly send
feedback from the Profile > Feedback page
in the SwitchBot app.
Contact & Support
The product cannot unlock if the battery
runs out entirely. Please regularly check on
the app or the LED indicator light to ensure
that the battery level is not too low and
replace when needed. Please also bring
your key to avoid being locked out.
This product is for indoor use only.
If you notice any product malfunction,
please stop using immediately and contact
our Customer Support Team.
Precautions
LED Indicator Light
Thumbturn
Color: Black
Material: PC+ABS
Size: 111.6 x 59 x 73.2mm
(4.4 x 2.3 x 2.9 in)
Weight: 253 g (8.9 oz) (with batteries)
Power Source: 2 CR123A batteries
Battery Life: Approximately 6 months
Operating Environment: Indoor only
OS Compatibility: iOS 11.0+, Android 5.0+
Communication Method: Bluetooth 5.0
Operating Temperature: -10 ºC to 45 ºC
(14 ºF to 113 ºF)
Relative Humidity: 10 % to 90 %
Package Contents Name of Parts Specifications
Spare Screws
User ManualWet Wipe
Battery Case Cover
Main Body Stand
(adjustable)
Double Sided Tape
(pre-installed)
Thumbturn Adaptor
(changeable)
Step 1: Clean the Installation Surface
Before installing SwitchBot Lock, please make
sure that the surface for installation is free
from dirt and dust, or this may weaken the
stickiness of the lock and increase the chance
of falling later.
1. Choose the thumbturn adaptor of the
appropriate size.
The package provides thumbturn adaptor in
3 different sizes and one of them has already
been installed on SwitchBot Lock.
2. Confirm the place of installation and direction
of the SwitchBot Lock.
Confirm the following based on the position
of your lock and handle:
Sufficient space near the thumbturn for
installing the back of SwitchBot Lock's main
body stand.
SwitchBot Lock does not affect the use of the
door handle.
3. Adjust the height of SwitchBot Lock
You can match the height of your thumbturn
by adjusting the main body stand.
Open the battery case cover, use the cross
head screwdriver to unscrew the screws on
the stand, pull the stand outwards to change
the height.
After installing the main body of SwitchBot
Lock, you must remove the fixing tape on the
side of the adaptor.
Congratulations! You have completed SwitchBot
Lock's installation.
Push SwitchBot Lock's main body against the
door for at least 2 minutes.
4. Install SwitchBot Lock on your door
The axes of different adaptors may differ,
please try to align them as precisely as you can.
Attention: Please make sure that the surface for installation
is free from dirt and dust. Or this may weaken the stickiness
of the lock and increase the chance of falling later.
Remove the double sided tape on the main
body stand, align the center of the adaptor
to the thumbturn's axis and install it on the
door as before.
Once confirmed with the appropriate height
of the stand, screw all the screws and close
the battery case cover.
Put the main body stand next to your door,
don't remove the protective layer of the double
sided tape yet. For smooth operation, keep
a 1 to 2 mm gap between the inside of the
thumbturn adaptor and the thumbturn. The
thumbturn adaptor should cover more than
half the depth of the thumbturn.
Hold SwitchBot Lock firmly, turn the thumbturn
and check if you can lock and unlock your door
smoothly.
Use the wet wipe provided in the package or
a cloth with neutral detergent to clean the
installation area on your door.
Step 2: Install SwitchBot Lock
When the battery level drops to lower than
20%, the device will notify you by flashing red
and making a sound every time you lock/unlock
the device. Please replace the 2 CR123A
batteries by opening the main body's battery
case cover as soon as possible.
Please visit for moresupport.switch-bot.com
details.
If you will not be using SwitchBot Lock, please
delete it on SwitchBot app's Lock page. Once
the device is deleted, all data you had would
reset to its factory settings. Please be careful
when doing so.
Please visit https://support.switch-bot.com/hc/
en-us/articles/4410510590359 for more details.
Please visit support.switch-bot.com/hc/en-us/
sections/4408365197079 for more details.
Remove the battery insulation sheet. After
SwitchBot Lock gets its power, the LED indicator
light on the front will blink, meaning that the
device is waiting for pairing.
Open the SwitchBot app and tap the + icon on
the top right corner of the homepage, choose
the lock icon and add the device. Please follow
the instructions on the app to complete
adding the device and adjusting its position.
Step 3: Add Device and Calibrate
Please visit for moresupport.switch-bot.com
details.
Blue light
flashes slowly
Blue and red light flash
slowly and alternately
Steady green light
Steady red light
Steady blue light
Waiting for pairing/
upgrading firmware
Pairing failed/firmware
upgrade failed
Successful locking/unlocking
Low battery/unusual
activity
Pause Auto-lock activated
LED Indicator Light Description
Manufacturer's Name: Woan Technology (Shenzhen) Co.,
Ltd.

exposure requirements, a minimum separation distance
of 20 cm must be maintained between the users body
and the device, including the antenna. Use only the
supplied or an approved antenna.
This device in compliance with the essential require-
ments and other relevant provisions of Directive
2014/53/EU. All essential radio test suites have been
carried out.
1. CAUTION : RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS

device used at 20 cm from your body
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help. The device has been evaluated to
meet general RF exposure requirement. The device can
be used in portable exposure condition without
restriction.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure
limit set forth for uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body.
Install the thumbturn adaptor of the right size
onto the main body of the SwitchBot Lock.
You should be able to hear a click when it is
firmly installed.
This product is only used as a door locking
control device and cannot avoid theft
completely. In the event of a burglary, the
company assumes no responsibility or liability
for any loss or damage suffered by any person
as a result of using the product.
Installation Guide LED Indicator Light
Battery Replacement
CE Warning
Disclaimer
Troubleshooting
More Functions
FCC Warning
Reset to Factory Settings


Produktspezifikationen

Marke: SwitchBot
Kategorie: Nicht kategorisiert
Modell: Lock

Brauchst du Hilfe?

Wenn Sie Hilfe mit SwitchBot Lock benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert SwitchBot

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-