Swift M30TZ-SM99CL Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Swift M30TZ-SM99CL (8 Seiten) in der Kategorie Mikroskop. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
Motic Swift SM99CLline 30 M TZ-
Microscope
Use and Care Manual
1
The Swift TZ zoom stereo microscope is ideal for laboratory, industrial an M30 d educational use. The M30TZ is designed
to produce a crisp image (erect) with a generous field of view and an excellent depth of focus. It features zoom
objectives with continuous magnification ranges from 7.5x-45x which is not possible with a fixed power stereo
microscope.
Model Number
M 30TZ
O bjectives
.75 – 4.5X X
Eyepieces
W10X, FN20
Total Magnification/ Field of View
7.5x 45x / 2 5.75mm- 0 – mm
Working Distance
100mm
Stand
SM99 CL
SM90CL Illuminator (incident & transmitted)
3W, 5500K LED
Knurled Diopter
Adju
Zoom
Eyepiece Tube
Eyepieces
Head Locking Screw
Incidental
Illuminator
Stage clips
Stage Plate
Intensity Control
for both
illuminators
Incidental (top) and
Transmitted
(bottom) Light
Switches
Lo
Tension Adjustment Collar
(behind this focusing knob)
Powe
illumination)
Base
M -30TZ SM99CL
C-Mount locking
screw
2
Stereoscopic microscopes are designed for viewing 3-dimensional objects, or assembly of small inspection,
parts, and for dissection of biological specimen at low magnification. The 45° inclined viewing head provides
an upright, unreversed image which permits easy manipulation of object being viewed while looking through
the microscope. The incidental and transmitted illuminators incorporate high intensity 3 watt LED lamps.
For optimum viewing satisfaction, follow these simple procedures. Nomenclature used to describe
components and controls can be identified by referring to the diagram at left.
UNPACKING
Remove and unpack box containing post stand with 90mm diameter black/white contrast plate installed from
master carton, along with AC power cord. Remove and unpack box containing zoom head assembly, one pair
of eyepieces, 2 each rubber eye shields, 0.90mm and 2mm “L” hex key wrench, 95mm frosted stage plate and
dust cover.
1. Make certain not to touch any of the lens surfaces while handling the microscope. Dust, dirt, fingerprints
can damage the delicate lens surfaces or adversely affect image quality.
2. Examine packing material before you discard it. Retain the packing boxes in case you need to transport,
store, or return the microscope for service. If it becomes necessary to ship the microscope for any reason,
pack it in the original boxes and then pack these boxes in outer corrugated shipping container for optimum
protection. Use of the inadequate packing will not provide adequate protection in transit and will void your
warranty.
ASSEMBLY
Place the microscope post stand on a flat stable and clean surface.
1. Mounting the focusing assembly to the microscope post stand.
A. Tighten support collar locking screw located on post stand.
B. Loosen focusing block locking screw locate on back of focusing block
C. Slide focusing block over 32mm diameter vertical post of stand
D. Tighten focusing block locking screw
2. Mounting stereo zoom head to stand.
A. Loosen head locking screw.
B. bInsert head into the stand (do not force), positioning head to face either forward or ackward, whichever
suits your preference or needs.
C. Tighten head locking screw.
3. Install rubber eyepiece shields over top of eyepieces.
4. Connect the coaxial plug, from incidental illuminator, into power jack located on top of 32mm diameter post.
5. Plug your IEC power cable into the IEC port located on rear of microscope base and the other end of the
AC cord into appropriate 100 to 240 volt AC outlet.
OPERATION
Produktspezifikationen
| Marke: | Swift |
| Kategorie: | Mikroskop |
| Modell: | M30TZ-SM99CL |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Swift M30TZ-SM99CL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikroskop Swift
3 September 2024
3 September 2024
28 August 2024
20 August 2024
20 August 2024
20 August 2024
Bedienungsanleitung Mikroskop
- Mikroskop Hama
- Mikroskop Maginon
- Mikroskop Bresser
- Mikroskop National Geographic
- Mikroskop Olympus
- Mikroskop Nikon
- Mikroskop Carson
- Mikroskop Leica
- Mikroskop Traveler
- Mikroskop Zeiss
- Mikroskop Toolcraft
- Mikroskop DNT
- Mikroskop Celestron
- Mikroskop Levenhuk
- Mikroskop Reflecta
- Mikroskop PCE Instruments
- Mikroskop Veho
- Mikroskop Vivitar
- Mikroskop Boeco
- Mikroskop Discovery
- Mikroskop Learning Resources
- Mikroskop Barska
- Mikroskop Ideal Tek
- Mikroskop Dino-Lite
- Mikroskop BeaverLab
- Mikroskop National Optical
Neueste Bedienungsanleitung fĂĽr -Kategorien-
16 Oktober 2024
18 September 2024
6 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
31 August 2024
30 August 2024