SureFire X300U Bedienungsanleitung

SureFire Nicht kategorisiert X300U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SureFire X300U (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

USER MANUAL

MAINTENANCE

Use a clean, dry cloth to wipe off body and window. For additional tips

on maintaining your SureFire illumination tool, visit www.sureﬁre.com/

faqs-maintenance.

ACCESSORIES

SureFire makes a full line of accessories for most of its illumination tools.

For a complete listing, visit www.sureﬁre.com/partsaccessories.

THE SUREFIRE NO-HASSLE GUARANTEE

We’ll do what it takes to keep your SureFire gear running smoothly.

SureFire warrants that if you — our customer — purchase one

of our products, and we determine that it is defective in material

and/or workmanship during your lifetime, we will repair or replace

it — no hassle!

Our warranty does not cover consumables or normal wear-and-tear

— things like batteries draining, headbands and headpads wearing

out, ink cartridges running out, and switches wearing out — or

damage resulting from abuse, alterations, unauthorized repairs, or

use contrary to SureFire’s user manuals.

Should you need a replacement product, SureFire reserves the

right to replace an obsolete product with a current production,

like model. In the event that any issue with a SureFire product is

not covered under this warranty SureFire can arrange to have the

product repaired for a reasonable fee.

STANDARD DISCLAIMER

Except as speciﬁed above or prohibited by applicable law: all express

or implied conditions and warranties, including, without limitation,

any implied warranty or condition of merchantability or ﬁtness for

a particular purpose, or accuracy of any informational content, are

hereby excluded and disclaimed by SureFire; and in no event will

SureFire be liable for any special, direct, indirect, consequential,

incidental or punitive damages howsoever arising and regardless

of the theory of liability, even if advised of the possibility of such

damages. Products, prices, availability, speciﬁcations, and offers

are subject to change or cancellation at any time without notice.

WARRANTY CLAIMS

For claims, contact Customer Service at 714-545-9444 to obtain a

Return Merchandise Authorization number (RMA#). Then package

the unit carefully and send to (no CODs):

SureFire, LLC.

Repairs Department, RMA#____

17680 Newhope Street, Suite B

Fountain Valley, CA 92708

SureFire will pay any reasonable shipping costs to return the unit to you.

Revision E 02-2019

71-01-871

X300U-A, X300U-A-TN

18300 MT. BALDY CIRCLE

FOUNTAIN VALLEY, CA 92708-6122

WWW.SUREFIRE.COM

Patents: 7117624, 7591098, 7325352, 7360333, 7310903

ULTRA-HIGH-OUTPUT LED HANDGUN LIGHT

X300U-A

X300U-A-TN

X300U-A, X300U-A-TN

OUTPUT 1,000 lumens

RUNTIME 1.25 hours

PEAK BEAM INTENSITY 11,300 candela

DISTANCE 213 meters

CONSTRUCTION Aluminum

FINISH Mil-Spec Hard Anodized

WEIGHT (w/batteries) 4.0 oz (113 g)

LENGTH 3.6 in (9.1 cm)

BEZEL DIAMETER 1.125 in (2.9 cm)

BATTERIES Two 123A lithium (incl.)

SWITCHING

Ambidextrous push/toggle

LIQUID INGRESS

PROTECTION

IPX7, Submersion up to one meter

for 30 minutes

All performance claims tested to ANSI/NEMA FL1-2009 Standard.

SPECIFICATIONS

KIT CONTENTS:

• X300 ULTRA WeaponLight

• Battery Cover

• Battery Cover Retaining Pin

• Universal Lever Latch (marked “U,” installed)

• Picatinny Lever Latch (marked “P”)

• Spring (installed)

• Rail Latch Lock

• Universal Rail Latch (marked “U”)

• Picatinny Rail Latch (marked “P”)

• Lock Actuator

• Lock Actuator Screw

• 5/64” Hex Wrench

• One Tube Loctite 242

• Two 123A Batteries

BATTERY INSTALLATION / REPLACEMENT

1. Attach Battery Cover by aligning cover hinges with X300

ULTRA’s Hinge Pin (Fig. 1) and carefully snap hinges onto pin.

2. Insert Two 123A Batteries with terminals oriented as shown in

the engraved schematic on X300 ULTRA body and in Fig. 1.

3. Close Battery Cover until compartment latch clicks and locks

cover in place.

4. Using pliers, insert battery cover Retaining Pin through both

holes in latch bracket, as shown in Fig. 2, until pin locks in

place and latch cannot be released.

5. To replace batteries, remove battery cover Retaining Pin with

pliers, depress latch to open Battery Cover, and remove and

properly dispose of depleted batteries.

6. Install fresh batteries and re-secure Battery Compartment per

Installation directions above.

Note: Replace all batteries; never mix old and new batteries.

MOUNTING X300 ULTRA TO WEAPON

X300 ULTRA may be securely mounted to a weapon using either

its Lever Latch or Rail-Lock® system. The Lever Latch system

is the simpler mounting option. However, those planning on

keeping their X300 mounted to their weapon fulltime may opt

for Rail-Lock mounting, as it offers more security but less ease

of attachment/detachment. Should your weapon experience

any feed malfunctions using the Lever Latch system, they may

be alleviated by switching to the Rail-Lock system. Shooter is

responsible for testing, maintaining, and correctly installing any

accessories to weapon.

LEVER-LATCH MOUNTING (UNIVERSAL RAILS)

X300 ULTRA ships with its Universal Lever Latch (marked “U”)

pre-installed. To mount to Universal accessory rail:

1. Align X300 ULTRA Rail Guides with grooves of Universal

accessory rail.

2. Slide X300 ULTRA onto rail until Lever Latch clicks and locks

X300 ULTRA securely in place.

3. To remove, press down on Lever Latch tabs and slide X300

ULTRA forward off rail.

LEVER-LATCH INSTALLATION & MOUNTING

(PICATINNY RAILS)

1. Using the included 5/64” Hex Wrench, remove X300 ULTRA Rail

Guides by unscrewing the Hex Screws securing the Rail

Guides. (Fig. 3)

2. Carefully unhook hooked end of installed Universal Lever

Latch (marked “U”) from X300 ULTRA’s Hinge Pin and also

remove Spring underneath. (Fig. 4) Set Spring aside and store

Universal Lever Latch in a secure place for future use.

3. Hook hooked end of the Picatinny Lever Latch (marked “P”)

onto X300 ULTRA’s Hinge Pin so “P” and SureFire logo are visible.

Place Spring between Lever Latch and X300 ULTRA body so it

nests in round slot on the underside of Lever Latch. (Fig. 4)

4. Apply Loctite 242 sparingly to the threads of each Hex Screw.

While pressing down on Lever Latch, reattach Rail Guides by

screwing in Hex Screws with Hex Wrench.

5. While holding down Lever Latch tabs, slide X300 ULTRA onto

rail until Lever Latch’s crossbar mates with desired rail detent,

release Lever Latch tabs so that X300 ULTRA locks securely

in place.

6. Remove X300 ULTRA by pushing down on Lever Latch tabs

on both sides and slide X300 ULTRA off Picatinny rail.

RAIL-LOCK® INSTALLATION

1. Using the included 5/64” Hex Wrench, remove X300 ULTRA Rail

Guides by unscrewing Hex Screws securing guides. (Fig. 3)

2. Carefully unhook hooked end of installed Lever Latch from

X300 ULTRA’s Hinge Pin and remove Lever Latch and Spring

underneath it. Store both in a secure place for future use.

3. Insert Lock Actuator into slot on Rail Latch Lock,

ensuring beveled side of actuator faces in (ﬂat side out) and

actuator groove is facing screw hole in the Rail Latch Lock.

(Fig. 6) Insert Lock Actuator Screw into screw hole and turn

clockwise until it engages Lock Actuator. (Fig. 7)

4. Hook hooked end of Rail Latch Lock onto X300 ULTRA Hinge

Pin and insert Rail Latch Lock (actuator facing down) so it ﬁts

into slot on top of X300 ULTRA body. Lock Actuator Screw may

need to be loosened or tightened for screw head to align with

its designated slot. (Fig. 7)

5. Select appropriate Rail Latch for weapon’s rail: “U” for

Universal; “P” for Picatinny.

6. Lift front edge of Rail Latch Lock. Connect slotted side of Rail

Latch to front edge of Rail Latch Lock. (Fig. 6)

7. Lower Rail Latch Lock and attached Rail Latch, ﬁtting both into

their designated slots in X300 ULTRA body.

8. Apply Loctite 242 sparingly to threads of each Hex Screw,

then reattach Rail Guides by screwing in Hex Screws with Hex

Wrench until hand tight. One Rail Guide has a notch, which ﬁts

over the Rail Latch. (Fig. 3)

RAIL-LOCK® MOUNTING

1. Pull Rail Latch Lock tabs rearward to release Rail Latch. At the

same time, pull out Rail Latch with your other hand. Extend

Rail Latch as far as it will go. Do not pull too hard or extend

too far —Rail Latch is not designed to come all the way out. (Fig. 8)

2. Slide X300 ULTRA onto a Universal or Picatinny rail and, once

in preferred position, press in Rail Latch until it locks in place. (Fig. 9)

3. Insert 5/64” Hex Wrench into slot on side of X300 ULTRA and

tighten Lock Actuator Screw.

4. To remove X300 ULTRA, loosen Lock Actuator Screw with Hex

Wrench, pull back Rail Latch Lock tabs, extend Rail Latch, then

slide X300 ULTRA off rail.

LIGHT OPERATION

For momentary-on light operation, press and hold either the right

or left side of tailcap toggle switch; release to turn light off. (Fig. 10)

For constant-on operation, rotate tailcap toggle switch up or

down; rotate in the opposite direction to turn light off. (Fig. 10)

Note: An assortment of remote switches are available for

SureFire X-Series WeaponLights. Visit www.sureﬁre.com/

parts-accessories/switches.html

FIGURE 1

FIGURE 2

FIGURE 3 FIGURE 4

FIGURE 5 FIGURE 6

FIGURE 7 FIGURE 8

FIGURE 9 FIGURE 10

HINGE PIN

HINGE COVER

RELEASE

SCREWS

RAIL GUIDES

NOTCH

LEVER LATCH

SPRING

RAILS

RAIL LATCH

LOCK TAB

LOCK

ACTUATOR

RAIL LATCH

LOCK

ACTUATOR

RAIL LATCH

LOCK ACTUATOR

SCREW

SCREW HEAD

SLOT

X300 ULTRA with RAIL-LOCK shown

BEFORE INITIAL USE, REMOVE BATTERY INSULATOR

Produktspezifikationen

Marke:	SureFire
Kategorie:	Nicht kategorisiert
Modell:	X300U

Brauchst du Hilfe?

Wenn Sie Hilfe mit SureFire X300U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert SureFire

SureFire X300U Bedienungsanleitung

16 August 2024

SureFire XSC Bedienungsanleitung

7 August 2024

SureFire Vampire Scout M323V Bedienungsanleitung

7 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024