Sure-Fi DS007-ANALOG Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sure-Fi DS007-ANALOG (21 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
1
SURE-FI, INC. | www.sure-fi.com
Sure- Analog Bridge Fi
Operators Manual
Doc #PI0254 Rev 1.0
2
SURE-FI, INC. | www.sure-fi.com
Sure- Analog Bridge Fi
Quick Startup
The two units that are packaged together are factory paired and will only
communicate with each other.
Check initial operation
Connect the battery (included) the power cable (included) and plug the two-position connector 9V to 9V in to
the +V and -VIN positions the bottom connector each unit. Once both units are powered the ‘IN’ ‘ ’ on of up,
green POWER LED should solid each unit. Press and quickly release the button test be ON on ‘TEST’ to
communication between the two units. One more the blue Signal-Strength LEDs should light for one or of up
second indicate that successful communication has occurred. to
Perform a Range-Test from the desired install locations
With the batteries plugged each the units, place them the desired install location points and 9V in to of at
perform a Range-Test pressing and quickly releasing the button. The received signal strength by ‘TEST’ is
displayed for one second the six blue LEDs with the bottom LED indicating the minimum signal strength and on
all six LEDs indicating maximum signal strength.
Connect permanent power to
Before connecting each unit to the permanent power source, ensure that the 30VAC/VDC range it is in 12 to
and can source least 1 ampere. Connect the power each unit and perform several Range-Tests check at at to
for adequate input power.
Wire the input and output functions
Using manual a reference, wire the required devices each this as at unit.
3
SURE-FI, INC. | www.sure-fi.com
Sure- Analog Bridge Fi
Table Contents of
Part Numbers
Pg. 5
Product Overview
Pg. 5
Key Features
Pg. 5
General Specifications
Pg. 6
Radio Transceiver Specifications
Pg. 6
Device Overview, Analog Receiver Interface
Pg. 7
Device Overview, Analog Sensor Interface
Receiver Interface Top & Bottom Connector pin descriptions –
Pg. 8
Pg. 9
Sensor Interface Top & Bottom Connector pin descriptions –
Pg. 10
Analog Channels
Pg. 11
Analog and Sampling Ranges, Settings, and Thresholds
Pg. 12
Relays: Operating the Relays, Relay Control
Pg. 13
Digital Inputs and Outputs (IN 2 / OUT OUT 1, IN 1, 2)
Pg. 13
Test (Range Test) Push Button
Pg. 13
LEDS: Power, Battery, Tx, Rx
Pg. 13
Antenna information
Pg. 13
Connector plug information and part numbers
Pg. 14
Chaining Multiple systems together for extended range
Pg. 14
Mounting
Pg. 15
Troubleshooting and manually testing the Relays
Pg. 17
Sure- downloading, installing, connecting Fi APP,
Pg. 18
Sure- Firmware Updating Fi APP:
Pg. 19
Sure- System Heartbeat time Fi APP:
Sure- Setting a Relay default state, timeout, and setting Alert Relay Fi APP: an
Pg. 19
Pg. 19
FCC and Industry Canada Regulatory Statements
Pg. 20
Warranty
Pg. 21


Produktspezifikationen

Marke: Sure-Fi
Kategorie: Nicht kategorisiert
Modell: DS007-ANALOG
Produktfarbe: Schwarz
Ãœbertragungstechnik: Kabellos
Typ: Drinnen
Funkfrequenz: 902 - 928 MHz
Temperaturmessbereich: - °C
Transmissionsdistanz: 2500 m

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sure-Fi DS007-ANALOG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sure-Fi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-