Supermicro X7DAE Bedienungsanleitung
Supermicro
Motherboards
X7DAE
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Supermicro X7DAE (133 Seiten) in der Kategorie Motherboards. Dieser Bedienungsanleitung war fĂŒr 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/133
X7DA8
USERâS MANUAL
Revision 1.2a
SUPER
X7DAE
Manual Revision 1.2a
Release Date: July 17, 2009
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this Userâs Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturerâs instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to correct the interference by one or more of
the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and the receiver.
*Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
*Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. âPerchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorateâ.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the X7DA8/X7DAE motherboard. The X7DA8/X7DAE supports
dual Intel quad core/dual core processors with an FSB speed of 667 MHz/1.066
GHz/1.333 GHz. With dual 64-bit quad core/dual core processors built-in, this moth-
erboard offers substantial functionality enhancements to the motherboards based on
the Intel Core microarchitecture while remaining compatible with the IA-32 software.
The features include Intel Hyper-Threading Technology, Virtualization Technology,
Thermal Monitor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology, Advanced
Dynamic Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3
(SSE3) and Extended Memory 64 Technology (EM64T). These features allow the
motherboard to operate at much higher speeds with better power management in
much safer thermal environments than the traditional motherboards. The X7DA8/
X7DAE is ideal for high performance dual processor (DP) workstation and enterprise
server environments. Please refer to the motherboard speciïŹ cations pages on our
web site (http://www.supermicro.com/products/motherboard) for updates on sup-
ported processors. This product is intended to be professionally installed.
Manual Organization
Chapter 1 describes the features, speciïŹ cations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes trouble-Chapter 3
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A and Appendix B provide BIOS POST Messages and POST Codes.
Appendix C, Appendix D and Appendix E list HostRAID Setup Guidelines and
Software Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation or
to prevent damage to the components.
Note: Additional Information given to differentiate various models or to ensure cor-
rect system setup.
iii
Preface
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Motherboards |
| Modell: | X7DAE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X7DAE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Motherboards Supermicro
16 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
12 Juli 2024
12 Juli 2024
12 Juli 2024
10 Juli 2024
9 Juli 2024
Bedienungsanleitung Motherboards
- Motherboards Asus
- Motherboards Gigabyte
- Motherboards MSI
- Motherboards Evga
- Motherboards Intel
- Motherboards Abit
Neueste Bedienungsanleitung fĂŒr -Kategorien-
8 Oktober 2024
7 Oktober 2024
14 Juli 2024
12 Juli 2024
12 Juli 2024
11 Juli 2024
7 Juli 2024
6 Juli 2024