Supermicro X10DGO-SXM Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Supermicro X10DGO-SXM (114 Seiten) in der Kategorie Motherboards. Dieser Bedienungsanleitung war fĂŒr 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/114
USER’S MANUAL
Revision 1.0
X10DGO-T
X10DGO-SXM
Manual Revision 1.0
Release Date: April 18, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manual is written for system integrators, IT professionals, and
knowledgeable end users. It provides information for the installation and use of the
X10DGO(-T/-SXM) motherboard.
About This Motherboard
T h e S u p e r m i c r o X 1 0 D G O ( - T / - S X M ) m o t h e r b o a r d s u p p o r t s
dual IntelÂź Xeon EP E5-2600 v3/v4 (Socket R3) processors, which balance high
performance with improved power eciency. The processor oers point-to-point
connections with a transfer speed of up to 9.6GT/s and TDP (Thermal Design
Power) of 160W, featuring new technologies such as IntelÂź Turbo Technology and
vPro Technology for optimized security, exible virtualization, and smarter resource
management. Built with the PCH C612, the X10DGO(-T/-SXM) includes the IntelÂź
Intelligent Power Node Manager, Management Engine (ME), and Digital Media
Interface (DMI). Tthe X10DGO(-T/-SXM) has 24 DIMM slots with up to 1536GB of
RDIMM (Registered) and LRDIMM (Load Reduced) ECC/Non-ECC DDR4 memory
at 2400MT/s, providing higher compute performance and secure encryption. Please
refer to our website (http://www.supermicro.com) for CPU and memory support
updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the IntelÂź PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the CMOS setup utility.
Appendix A provides BIOS error beep codes.
Appendix B lists software Installation Instructions.
Appendix C contains UEFI BIOS recovery instructions.
Preface
iii


Produktspezifikationen

Marke: Supermicro
Kategorie: Motherboards
Modell: X10DGO-SXM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Supermicro X10DGO-SXM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten