Supermicro X10SBA Bedienungsanleitung
Supermicro
Motherboards
X10SBA
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X10SBA (99 Seiten) in der Kategorie Motherboards. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/99
X10SBA
X10SBA-L
USER’S MANUAL
Revision 1.0b
The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
•Consult the authorized dealer or an experienced radio/TV technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0b
Release Date: August 29, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
This manua l is written for system inte grators, PC tec hnicians and
knowledgeable PC users. It provides information for the installation and use of the
X10SBA/X10SBA-L motherboard.
About This Motherboard
The X10SBA/X10SBA-L supports the next-generation Intel
® Celeron
J1900 SoC (System on a Chip) 22nm Quad-Core processor in the BGA 1170 format.
With a 64-bit, 22nm, low-power Tri-gate Quad Core Silvermont processor built into
it, the X10SBA(-L) motherboard offers unprecedented enhancements in system
performance, power efciency, and visual/media capability. This motherboard is
ideal for SMB entry-level Storage, Server, or Appliance platforms that are optimized
for networking, thin-client, Kiosk, Digital Signage, and control-box applications.
Please refer to our website (http://www.supermicro.com/products/) for processor
and memory support updates. This product is intended to be installed and serviced
by professional technicians.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board, and provides detailed information on the Intel Celeron Bay Trail processor
platform.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Appendix D contains Dual Boot Block instructions.
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Motherboards |
| Modell: | X10SBA |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X10SBA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Motherboards Supermicro
16 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
12 Juli 2024
12 Juli 2024
12 Juli 2024
10 Juli 2024
9 Juli 2024
Bedienungsanleitung Motherboards
- Motherboards Asus
- Motherboards Gigabyte
- Motherboards MSI
- Motherboards Evga
- Motherboards Intel
- Motherboards Abit
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
7 Oktober 2024
14 Juli 2024
12 Juli 2024
12 Juli 2024
11 Juli 2024
7 Juli 2024
6 Juli 2024